[OH] edelbrock street tunnel ram w 2 600 edy carbs and tunning kits. 450
#1
Member
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Columbus
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro rs.
Engine: 357 t88 turbo motor
Transmission: Powerglide
Axle/Gears: 3.55
edelbrock street tunnel ram w 2 600 edy carbs and tunning kits. 450
Well I've ran this a few times on my s10 with and without spray. But since I've went turbo and don't wana poke a hole in the blazer hood its time to part ways with the tunnel ram and 2 4s. I went 11.02 at 127 with my 355 pulling a 32x14 slick these things screem up top. 2 600 edy carbs are perfect size for 327 to 406. Maybe a lil larger. I shifted it at 7800. With a bullet roller cam. Wich is for sale too
Also have the s10 hood with the hole in it off my s10
This setup has just sat but it comes with the carbs linkage intake and full edy jetkit metering rods and new n/s assys.
the choke parts have been removed from each carb for flow. i do have the choke parts but u shouldent need them.
Shown with the nos dual plate kit wich I have as well. Dual plate cheater kit on 250 shot went 9.90 at 134 w 1.38 60ft
This is w a hilborn top and the hood is the one I have for sale
Also have the s10 hood with the hole in it off my s10
This setup has just sat but it comes with the carbs linkage intake and full edy jetkit metering rods and new n/s assys.
the choke parts have been removed from each carb for flow. i do have the choke parts but u shouldent need them.
Shown with the nos dual plate kit wich I have as well. Dual plate cheater kit on 250 shot went 9.90 at 134 w 1.38 60ft
This is w a hilborn top and the hood is the one I have for sale
#2
Re: edelbrock street tunnel ram w 2 600 edy carbs and tunning kits. 450
what size cam and specs? how much? im running the same setup on my 355 but have 2 500cfm avs edelbrock carbs
#3
Member
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Columbus
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro rs.
Engine: 357 t88 turbo motor
Transmission: Powerglide
Axle/Gears: 3.55
Re: edelbrock street tunnel ram w 2 600 edy carbs and tunning kits. 450
sold
Ran a few cams with it last was a bullet 678 284 at .050 .645 106 roller shifted at 7800 went 11.02 at 127. Prety good pulling my huge slicks and 3600 lb truck
Ran a few cams with it last was a bullet 678 284 at .050 .645 106 roller shifted at 7800 went 11.02 at 127. Prety good pulling my huge slicks and 3600 lb truck
#4
Member
Thread Starter
iTrader: (2)
Join Date: Nov 2005
Location: Columbus
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro rs.
Engine: 357 t88 turbo motor
Transmission: Powerglide
Axle/Gears: 3.55
Re: edelbrock street tunnel ram w 2 600 edy carbs and tunning kits. 450
sold
Ran a few cams with it last was a bullet 678 284 at .050 .645 106 roller shifted at 7800 went 11.02 at 127. Prety good pulling my huge slicks and 3600 lb truck
Ran a few cams with it last was a bullet 678 284 at .050 .645 106 roller shifted at 7800 went 11.02 at 127. Prety good pulling my huge slicks and 3600 lb truck
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
10
11-16-2015 01:13 PM
BlackphantomZ28
Engine/Drivetrain/Suspension Parts for Sale
0
08-22-2015 01:00 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM