[Sold] Price Reduced-Complete 3" Catback Exhaust System
#1
Price Reduced-Complete 3" Catback Exhaust System
Tim from Wyoming...82601
I tried to answer all possible questions here in my post. Please read entire post before asking questions. YES, it is $159.00 shipped to anywhere in the states, except Hawaii or maybe Alaska. This means you pay $159.00, and I will ship the exhaust to your door.
PayPal is timmytina350@msn.com
Up for sale is my nearly brand new Classic Chambered Exhaust catback system. It utilizes a Powerstick chambered muffler. It's a nice exhaust system that was welded together nicely at Rick's Rod Shop here in Casper, Wyoming. There is no packing material in the muffler--it DOES NOT sound like a glasspack--it sounds way nicer.
Price: only $159.00 shipped
Why I am selling it: I am putting a fire breathing 383 engine in my car and need long tube headers and custom Y-pipe, and I have a dual exit exhaust to swap in, along with my engine swap.
This exhaust is pretty much brand new and in excellent condition. I only ran it for 3 months, before I yanked the old engine out.
What you'd be getting:
-36" Classic Chambered Exhaust Powerstick Muffler--3.5" overall diameter--3" flowpath with all 3" aluminized steel piping from catalytic converter location all the way back to the exit tip All hangers are in place....just bolt it in and weld or fasten it to your catalytic converter or y-pipe, or have a shop do it.
Muffler is made of 16 gauge steel, both the inside section and the outer shell.
I don't need a cat here in Wyoming, so the system doesn't have a cat. You can weld it to your existing cat or get a cat for it...your choice.
FLOW: Here is the website for the muffler portion of the exhaust, and there are sound clips too (my sound video is below): http://classicchambered.com/
FITMENT/INSTALLATION: It is very simple and clean. This exhaust system runs in the stock location on our cars, and it fits perfectly and has the same or better ground clearance as our stock systems.
The hangers are already in place on the piping, so all you have to do is bolt them down (two of them).
YES, it attaches to the stock Y Pipe!!!! It is a single exit, single pipe system that runs in STOCK location and goes over the axle, and the tip is tucked under somewhat so it doesn't stick out and look retarded. The tip is angled toward the ground and out the back and works very well.
SOUND: It sounds frickin' awesome, especially in person. There are some really nice "sweet spots" at cruising RPMs, both on the highway and on the streets.
And here is a video/sound clip of this exhaust on my stock 305 Z28 with a set of Hedman shorties http://www.youtube.com/watch?v=MdPS84W8nRo
SHIPPING:
A. I will cut the exhaust at the front portion where the pipe meets the muffler, leave the middle section with muffler and portion of tailpipe intact, and cut the tail section that goes over the axle, so you will receive the exhaust in three pieces that will be marked so it will be easy to line it up and weld it again.
B. I will cut only the section that goes over the axle and put the exhaust in a larger box (I would charge $199.00 shipped if you want this option, since the box will be nearly twice as long)
The whole setup:
The powerstick muffler portion:
I tried to answer all possible questions here in my post. Please read entire post before asking questions. YES, it is $159.00 shipped to anywhere in the states, except Hawaii or maybe Alaska. This means you pay $159.00, and I will ship the exhaust to your door.
PayPal is timmytina350@msn.com
Up for sale is my nearly brand new Classic Chambered Exhaust catback system. It utilizes a Powerstick chambered muffler. It's a nice exhaust system that was welded together nicely at Rick's Rod Shop here in Casper, Wyoming. There is no packing material in the muffler--it DOES NOT sound like a glasspack--it sounds way nicer.
Price: only $159.00 shipped
Why I am selling it: I am putting a fire breathing 383 engine in my car and need long tube headers and custom Y-pipe, and I have a dual exit exhaust to swap in, along with my engine swap.
This exhaust is pretty much brand new and in excellent condition. I only ran it for 3 months, before I yanked the old engine out.
What you'd be getting:
-36" Classic Chambered Exhaust Powerstick Muffler--3.5" overall diameter--3" flowpath with all 3" aluminized steel piping from catalytic converter location all the way back to the exit tip All hangers are in place....just bolt it in and weld or fasten it to your catalytic converter or y-pipe, or have a shop do it.
Muffler is made of 16 gauge steel, both the inside section and the outer shell.
I don't need a cat here in Wyoming, so the system doesn't have a cat. You can weld it to your existing cat or get a cat for it...your choice.
FLOW: Here is the website for the muffler portion of the exhaust, and there are sound clips too (my sound video is below): http://classicchambered.com/
FITMENT/INSTALLATION: It is very simple and clean. This exhaust system runs in the stock location on our cars, and it fits perfectly and has the same or better ground clearance as our stock systems.
The hangers are already in place on the piping, so all you have to do is bolt them down (two of them).
YES, it attaches to the stock Y Pipe!!!! It is a single exit, single pipe system that runs in STOCK location and goes over the axle, and the tip is tucked under somewhat so it doesn't stick out and look retarded. The tip is angled toward the ground and out the back and works very well.
SOUND: It sounds frickin' awesome, especially in person. There are some really nice "sweet spots" at cruising RPMs, both on the highway and on the streets.
And here is a video/sound clip of this exhaust on my stock 305 Z28 with a set of Hedman shorties http://www.youtube.com/watch?v=MdPS84W8nRo
SHIPPING:
A. I will cut the exhaust at the front portion where the pipe meets the muffler, leave the middle section with muffler and portion of tailpipe intact, and cut the tail section that goes over the axle, so you will receive the exhaust in three pieces that will be marked so it will be easy to line it up and weld it again.
B. I will cut only the section that goes over the axle and put the exhaust in a larger box (I would charge $199.00 shipped if you want this option, since the box will be nearly twice as long)
The whole setup:
The powerstick muffler portion:
Last edited by New2Chevy; 05-02-2011 at 08:58 PM.
#6
Supreme Member
iTrader: (1)
Join Date: Feb 2005
Location: Pleasant Grove, Utah
Posts: 2,642
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
hey grab a picture of that Y pipe... very interested in it.. thanks
#7
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
The Y-pipe is still attached to the rest of the exhaust, which is still hanging under the car....the car has been parked for almost 8 months, so no weather has touched the exhaust.
I'll get a picture of it when I get the rest of the system out of there.
I'll get a picture of it when I get the rest of the system out of there.
Trending Topics
#11
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
Any y pipe pics yet?
#15
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
Single or dual cat? If single, 3" outlet?
#17
Senior Member
iTrader: (9)
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
How much for everything besides the muffler shipped?
Is the ypipe 2.5" or 3"? Headers are 1 5/8 or 1 3/4 to 2.5 or 3"?
very interested!
Also wanted to ask if you could take a picture of the setup, underneath the whole vehicle. I might purchase it with the muffler.. was debating between this or the slp loudmouth shotgun with a dual exit, muffler before the s pipe
Is the ypipe 2.5" or 3"? Headers are 1 5/8 or 1 3/4 to 2.5 or 3"?
very interested!
Also wanted to ask if you could take a picture of the setup, underneath the whole vehicle. I might purchase it with the muffler.. was debating between this or the slp loudmouth shotgun with a dual exit, muffler before the s pipe
Last edited by Timinsk; 01-16-2011 at 11:00 PM.
#19
Junior Member
iTrader: (4)
Join Date: Jan 2008
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc-z, 78 z28, 91 z28
Engine: 355-carb, 350-carb, 350-TPI
Transmission: 5speed, at, 5 speed
Axle/Gears: 3.42, 3.42-stock, 3.42-1LE
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
still no pics?
#21
Junior Member
iTrader: (4)
Join Date: Jan 2008
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc-z, 78 z28, 91 z28
Engine: 355-carb, 350-carb, 350-TPI
Transmission: 5speed, at, 5 speed
Axle/Gears: 3.42, 3.42-stock, 3.42-1LE
Re: F/S: Coated Hedman Headers, Y-Pipe, & FULL exhaust
.. nothing personal... it would... trust is hard when u don't know someone...
#24
Junior Member
iTrader: (4)
Join Date: Jan 2008
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc-z, 78 z28, 91 z28
Engine: 355-carb, 350-carb, 350-TPI
Transmission: 5speed, at, 5 speed
Axle/Gears: 3.42, 3.42-stock, 3.42-1LE
Re: F/S: price lowered: Coated Hedman Headers, Y-Pipe, & FULL exhaust
dude u keep saying ur gonna post pics.. ?? where are they .. only gonna help u sell
#25
Re: F/S: price lowered: Coated Hedman Headers, Y-Pipe, & FULL exhaust
I reduced the prices again.
I apologize for the wait on the pictures. I drive a truck for a living and have been working a lot and have not been able to do get pics of the exhaust yet. I will do it as soon as I can. Again, sorry for the wait.
I apologize for the wait on the pictures. I drive a truck for a living and have been working a lot and have not been able to do get pics of the exhaust yet. I will do it as soon as I can. Again, sorry for the wait.
Last edited by New2Chevy; 01-22-2011 at 04:27 PM.
#28
Re: F/S: price lowered: Coated Hedman Headers, Y-Pipe, & FULL exhaust
Guys, if you want cheap Flowtech headers and a crappy Flowtech Y-pipe, then just go buy them at AutoZone.
You get what you pay for.
Here you have a great deal on Hedman parts, which are, in fact, better than Flowtech parts.
And the Powerstick Muffler was built by Classic Chambered Exhaust, here in the USA.
Any other questions, feel free to ask.
And yes I know...you're waiting to see pics of the y-pipe and the rest of the system.
You get what you pay for.
Here you have a great deal on Hedman parts, which are, in fact, better than Flowtech parts.
And the Powerstick Muffler was built by Classic Chambered Exhaust, here in the USA.
Any other questions, feel free to ask.
And yes I know...you're waiting to see pics of the y-pipe and the rest of the system.
Last edited by New2Chevy; 01-23-2011 at 05:09 PM.
#29
Member
iTrader: (5)
Join Date: Dec 2007
Location: iowa
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Camaro
Engine: Stock 350 TPI
Transmission: 700r4
Re: F/S: price lowered: Coated Hedman Headers, Y-Pipe, & FULL exhaust
What do you want for just headers and y pipe with o2 hung welded in drivers side
#31
Junior Member
iTrader: (4)
Join Date: Jan 2008
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc-z, 78 z28, 91 z28
Engine: 355-carb, 350-carb, 350-TPI
Transmission: 5speed, at, 5 speed
Axle/Gears: 3.42, 3.42-stock, 3.42-1LE
Re: F/S: price lowered: Coated Hedman Headers, Y-Pipe, & FULL exhaust
pm sent
#37
Member
iTrader: (1)
Join Date: Sep 2009
Location: ft.lauderdale Florida
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC Z
Engine: 5.0 tpi. stock [for now]
Transmission: T5
Re: F/S: Low Price for a Nice Exhaust System
this wont fit a stock y pipe will it? i have a 305 tbi and my exhaust is practically rusted all the way through, im in college and dont have hundreds of dollars to spend on anything so i was looking to find a cheap exhaust setup to last me till i can save up and get new headers and a new y pipe, etc.
#41
Member
iTrader: (6)
Join Date: Feb 2000
Location: Valley Center,Kansas
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92RS
Engine: LS 402 inwork
Transmission: TH350
Axle/Gears: 10 bolt,3:73's
Re: F/S: Low Price for a Nice Exhaust System
How would you ship it? It appears that the whole assembly is welded together. I'm wondering how loud this would be behind my Procharged 383?
#45
Re: F/S: Low Price for a Nice Exhaust System
Single.
Aluminized steel piping and 16 gauge steel muffler flow core and outer shell.
I would cut it right before the muffler portion and ship that part, the muffler part, and the over the axle tail part.
It would fit nicely in a fairly decent sized box.
it's a nice exhaust guys.
Aluminized steel piping and 16 gauge steel muffler flow core and outer shell.
I would cut it right before the muffler portion and ship that part, the muffler part, and the over the axle tail part.
It would fit nicely in a fairly decent sized box.
it's a nice exhaust guys.
#46
Re: F/S: Low Price for a Nice Exhaust System
The nice thing is that this exhaust is inexpensive yet good.
I just want to go with the dual tailpipe look when my 383 is installed.
This exhaust will sort of tuck up under the rear a little so it's not so visible, but it sounds dang good and will last many years.
I just want to go with the dual tailpipe look when my 383 is installed.
This exhaust will sort of tuck up under the rear a little so it's not so visible, but it sounds dang good and will last many years.
this wont fit a stock y pipe will it? i have a 305 tbi and my exhaust is practically rusted all the way through, im in college and dont have hundreds of dollars to spend on anything so i was looking to find a cheap exhaust setup to last me till i can save up and get new headers and a new y pipe, etc.
#47
Member
iTrader: (1)
Join Date: Sep 2009
Location: ft.lauderdale Florida
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC Z
Engine: 5.0 tpi. stock [for now]
Transmission: T5
Re: F/S: Low Price for a Nice Exhaust System
hey, sorry man alot of things have came up in the last 2 days. i like this exhaust, my only problems are i dont have access to a welder and, now that my bank account is frozen for the time being (someone got ahold of my card info..long story..) i dont have 175 bucks to spend.. im sorry man. BUMP for a nice exhaust
#50
Junior Member
Join Date: Oct 2010
Location: warminster pa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 iroc z
Engine: 350 5.7
Transmission: 700 r4
Axle/Gears: 373
Re: F/S: Nice Catback Exhaust System
did you sell the headers y piupe or exhast yet ? i need headers i just found out i have a leak and i want to do the whole exhast over how much for everything?