[CO] PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
NEED TO SELL ASAP! any offers/ trades welcome! make me any offer at all on this stuff & I might take you up on it!
I have an almost new Edelbrock rpm performer proflo mpfi fuel inj. system for all sbc motors its got the rpm air gap alum. intake manifold w/ fuel rails, injectors, 1000 cfm throtle body, fuel pump, headers & all the supporting electronics that come with the kit, every thing needed to bolt on & go plus all the extras I added on myself that dont come with the original kit.
I ran this setup for one summer on the street only & then pulled the motor for the old LS1 swap over so I no longer have any use for the Edy system but its an awesome setup capable of sustaining well over 600hp & I'll even throw in a chrome K&N velocity stack air cleaner for free or a brand new Extreme Velocity carb hat for better hood clearence which can be used with a supercharger or as a cold air intake, your choice.
lots of extras in this kit that you cant find any where else!
all for only $1200 obo(cost me wel over $3k)call me for pix & info or to make offers 720 352 1917
~Andrew
thanx
I have an almost new Edelbrock rpm performer proflo mpfi fuel inj. system for all sbc motors its got the rpm air gap alum. intake manifold w/ fuel rails, injectors, 1000 cfm throtle body, fuel pump, headers & all the supporting electronics that come with the kit, every thing needed to bolt on & go plus all the extras I added on myself that dont come with the original kit.
I ran this setup for one summer on the street only & then pulled the motor for the old LS1 swap over so I no longer have any use for the Edy system but its an awesome setup capable of sustaining well over 600hp & I'll even throw in a chrome K&N velocity stack air cleaner for free or a brand new Extreme Velocity carb hat for better hood clearence which can be used with a supercharger or as a cold air intake, your choice.
lots of extras in this kit that you cant find any where else!
all for only $1200 obo(cost me wel over $3k)call me for pix & info or to make offers 720 352 1917
~Andrew
thanx
Last edited by THADURTYBIRD; 10-27-2010 at 05:20 PM.
#2
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
can i get a bump?
#4
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
thanx 4 the bump. nobody wants this setup i guess, too bad its a great kit for 3rd gen or other sbc's & a wicked deal at this price! I would be willing to entrtain some trades for '91 formula(interior, rims, ect.) or LS1/LS6 parts?
#5
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
u wanan sell the velocity stack air cleaner? bump it up....
#6
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
yeah I'll sell the k&n vel. stack if you want it
#7
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
can I get a bump please?
Trending Topics
#8
Senior Member
iTrader: (4)
Join Date: Apr 2002
Location: Midland, GA
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91' Z28, 92' Z28
Engine: 383, L98 stock
Transmission: Built 700R4, Stock 700R4
Axle/Gears: 12 Bolt 3.73, 10 Bolt 3.23
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
PM sent
#9
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
im game if you want to come down a tad. i know its low but cash tight ..got me a tight carb set up already. pm with your bottom dollar ,maybe we deal
#11
Junior Member
Join Date: Aug 2008
Location: Longview Texas
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 vert camaro
Engine: 305
Transmission: 700r4
Axle/Gears: 2.73
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
I'll have cash in less than two weeks if you still have it I'll take it.
#13
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
yes it should easily fit under the hood, it fit really nice in my '91 formula W/ stock hood, but I eventually ended up goin to a K&N cai anyway for better performance.
#14
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
still no takers? how bout a bump up for theweek end please?
#15
Junior Member
Join Date: Aug 2010
Location: SanAntonio,TX
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 CAMARO RS
Engine: 305 TBI
Transmission: AUTOMATIC
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
how much for the carb hat, or where can I get a cheap one thanks.
#16
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
bump it up, concidering any & all offers!
#18
Supreme Member
iTrader: (2)
Join Date: Aug 2001
Location: Peoria, IL USA
Posts: 1,081
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 GTA
Engine: 377ci
Transmission: T56
Axle/Gears: QP Ford 9" 3.70s
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
Buy it with the hat and i will buy the hat from you. He won't even respond to requests for the hat.
#19
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
***MOD EDIT***
Last edited by 88txiroc; 11-24-2010 at 03:13 AM.
#20
Senior Member
iTrader: (4)
Join Date: Apr 2002
Location: Midland, GA
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91' Z28, 92' Z28
Engine: 383, L98 stock
Transmission: Built 700R4, Stock 700R4
Axle/Gears: 12 Bolt 3.73, 10 Bolt 3.23
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
That's because he already sold the carb hat to me back in October. Thanks THADURTYBIRD!!
#21
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
#22
Supreme Member
iTrader: (2)
Join Date: Aug 2001
Location: Peoria, IL USA
Posts: 1,081
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 GTA
Engine: 377ci
Transmission: T56
Axle/Gears: QP Ford 9" 3.70s
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
Hey thats cool. For the record I do not have a problem with anyone in this thread. I was genuinely interested in the hat, but if it went to a good home than that is fine. I did not make an offer cause I did not want to accidently shout an insulting number. I am always willing to pay fair market price.
#24
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Colo.
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: PRICE REDUCED! Edelbrock mpfi fuel injection, free carb hat
bump for listing update.
the carb hat is gone but every thing else is still for sale for $1100 +ship.
best deal around, saw the same kit on ebay for $1300 +ship.
the carb hat is gone but every thing else is still for sale for $1100 +ship.
best deal around, saw the same kit on ebay for $1300 +ship.
NEED TO SELL ASAP! any offers/ trades welcome! make me any offer at all on this stuff & I might take you up on it!
I have an almost new Edelbrock rpm performer proflo mpfi fuel inj. system for all sbc motors its got the rpm air gap alum. intake manifold w/ fuel rails, injectors, 1000 cfm throtle body, fuel pump, headers & all the supporting electronics that come with the kit, every thing needed to bolt on & go plus all the extras I added on myself that dont come with the original kit.
I ran this setup for one summer (less that 1000mi.) on the street only & then pulled the motor for the old LS1 swap over so I no longer have any use for the Edy system but its an awesome setup capable of sustaining well over 600hp & I'll even throw in a chrome K&N velocity stack air cleaner for free or a brand new Extreme Velocity carb hat for better hood clearence which can be used with a supercharger or as a cold air intake, your choice.
lots of extras in this kit that you cant find any where else!
all for only $1200 obo(cost me wel over $3k)call me for pix & info or to make offers 720 352 1917
~Andrew
thanx
I have an almost new Edelbrock rpm performer proflo mpfi fuel inj. system for all sbc motors its got the rpm air gap alum. intake manifold w/ fuel rails, injectors, 1000 cfm throtle body, fuel pump, headers & all the supporting electronics that come with the kit, every thing needed to bolt on & go plus all the extras I added on myself that dont come with the original kit.
I ran this setup for one summer (less that 1000mi.) on the street only & then pulled the motor for the old LS1 swap over so I no longer have any use for the Edy system but its an awesome setup capable of sustaining well over 600hp & I'll even throw in a chrome K&N velocity stack air cleaner for free or a brand new Extreme Velocity carb hat for better hood clearence which can be used with a supercharger or as a cold air intake, your choice.
lots of extras in this kit that you cant find any where else!
all for only $1200 obo(cost me wel over $3k)call me for pix & info or to make offers 720 352 1917
~Andrew
thanx
Last edited by THADURTYBIRD; 12-13-2010 at 10:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
84z96L31vortec
North East Region
1
08-10-2015 08:27 PM