[Sold] 383 SBC, Comp Pro Mag Rockers,LPE219, AC Delete Pulley
#1
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
383 SBC, Comp Pro Mag Rockers,LPE219, AC Delete Pulley
I've decided I've had this combo long enough and its time to go extreme. Looking to sell.
383 Shortblock. Block is an 89 block one piece. 2 bolt main. Has about 25-30K miles on it. (Runs awesome) Eagle cast crank, Eagle Forged H beams. (I beams had trouble so they upgraded me for free) and Hyper SpeedPro pistons. Deck was line honed. ARP main studs. block was deck. Entire rotating assembly was internally balanced. Only problem was when they were building the engine. there was small crack in the lifter valley. It was drilled and pinned. . No Issues. Oil pressure is 25-30 HOT with it 80+ outside and being at a 600 idle. Doesnt burn an ounce of oil. Comes with Miloden Oil Pan. Engine was professional built by Victory Racing in Cleveland Ohio. $650.00 This is a great price! Pending sale.
LPE 219 cam. 219/219 560/560 112 LSA $125 shipped. Pending Sale
Comp Cams Pro Magnum 1.6 Rockers. Must be used with plates Much Better then the Crane Golds. Fits under stock valve centerbolt covers. $160.00 Shipped. Peding Sale
Ac Delete Pulley. $35.00 Shipped.
Used autozone gold Alternator. Works perfect. $40.00 Shipped
Email me Mkos1980@aol.com and we'll talk.
383 Shortblock. Block is an 89 block one piece. 2 bolt main. Has about 25-30K miles on it. (Runs awesome) Eagle cast crank, Eagle Forged H beams. (I beams had trouble so they upgraded me for free) and Hyper SpeedPro pistons. Deck was line honed. ARP main studs. block was deck. Entire rotating assembly was internally balanced. Only problem was when they were building the engine. there was small crack in the lifter valley. It was drilled and pinned. . No Issues. Oil pressure is 25-30 HOT with it 80+ outside and being at a 600 idle. Doesnt burn an ounce of oil. Comes with Miloden Oil Pan. Engine was professional built by Victory Racing in Cleveland Ohio. $650.00 This is a great price! Pending sale.
LPE 219 cam. 219/219 560/560 112 LSA $125 shipped. Pending Sale
Comp Cams Pro Magnum 1.6 Rockers. Must be used with plates Much Better then the Crane Golds. Fits under stock valve centerbolt covers. $160.00 Shipped. Peding Sale
Ac Delete Pulley. $35.00 Shipped.
Used autozone gold Alternator. Works perfect. $40.00 Shipped
Email me Mkos1980@aol.com and we'll talk.
Last edited by Mkos1980; 06-27-2010 at 09:24 PM.
#4
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: Ton of Parts. OBD II Setup, 383, Miniram ect.
Pic of engine. Its still all together. I take very good care of my stuff. It can all be seperated in 2-3 days.
Headers pics for someone who PM'ed me.
Headers pics for someone who PM'ed me.
Trending Topics
#8
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: Ton of Parts. OBD II Setup, 383, Miniram ect.
375+ shipping. Its nice set. I didnt use any cheapo muffler clamps. All I used was bandclamps so all the pipes come apart nice and are not crimped. The Y pipe does with SLP's cat adapter and a full set of Stage 8 locking header bolts.
#9
Senior Member
iTrader: (5)
Join Date: Feb 2005
Location: meridian, idaho
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 1500p\u 2wd
Engine: 91 z28 tpi 355
Transmission: 91 700r4
Re: Ton of Parts. OBD II Setup, 383, Miniram ect.
why are you parting out? How did the miniram run with the smallish cam? Did you still have some good lowend grunt?
#10
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: Ton of Parts. OBD II Setup, 383, Miniram ect.
I sent you a PM. Going to a boosted LSX motor now. Tons of low end. Not as much as with the LTR setup but enough. I found my dyno sheet. 368 RWHP and 381 RWTQ Quickest ET was a 12.3 with a 1.71 60'
#11
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: Ton of Parts. OBD II Setup, 383, Miniram ect.
+ When you have a perfect running car you get bored with it. lol I havent touched it in over a year. Just driving it. I need to work on it again lol.
#12
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: Ton of Parts. OBD II Setup, 383, Miniram ect.
Pic of Throttle body. Its like new. Comes with new GM IAC valve and TPS sensor.
#16
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
http://www.trickflow.com/partdetail....4&autoview=sku
These are the heads except mine are not CNC'ed It was only an option for these when I bought mine and I didnt have the extra cash.
#17
Senior Member
iTrader: (1)
Join Date: Dec 2003
Location: Ravenna, Ohio
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Trans Am GTA
Engine: 408 LS
Transmission: LS 4L60E
Axle/Gears: 9 Bolt/3.70 Gears/TAP Girdle
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
matt let me know if you don't sell the headers and y pipe. i installed those 2210 headers and they won't work with the efi setup in my car. no way to run a knock sensor with them. i'm looking for pick up some cheap slp's with the y pipe so i can just be done with the exhaust and back to driving the car.
#18
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
You have to move knock sensor to the driver side with the 2210's
375 and they are yours. I'm sure you can sell the 2210's and break even. I'll even throw in my catco 3in cat if you want.
375 and they are yours. I'm sure you can sell the 2210's and break even. I'll even throw in my catco 3in cat if you want.
#19
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
killer deals on well taken care of parts. Can't wait to see the boosted lsx. I have a lsx sitting around Im thinking of selling my boosted 383 and going turbo on the lsx.
You selling the 411 harness? I know a buddy who could use ALL the 411 stuff. we just did a HSR and procharger setup on. looking to swap from maf to new setup now.
You selling the 411 harness? I know a buddy who could use ALL the 411 stuff. we just did a HSR and procharger setup on. looking to swap from maf to new setup now.
#20
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Thanks Chris, Your right these parts are all in excellant shape. Accually I got an email that I was able to use my harness and ECM so I am keeping that and getting rid of the rest.
#21
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
No problem, figured id ask. would be nice to get all iin one deal. Esp. since I know the cndition of the parts.
You have a game plan on your next build already? Pm me so We dont clutter up your FS post. Id like to hear what ya have goin on.
You have a game plan on your next build already? Pm me so We dont clutter up your FS post. Id like to hear what ya have goin on.
#22
Member
iTrader: (1)
Join Date: Mar 2010
Location: Fayetteville Ar
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Firbird
Engine: 406
Transmission: 700r4 built
Axle/Gears: 3.42 posi 10 bolt
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Is there much rust on them?
Last edited by hardyz13; 06-11-2010 at 10:06 PM.
#23
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
They are 1 3/4 . I do not have the dent where people put it for the steering column. I grinded down my column instead. The spots of rust you see if surface rust on the coating. Comes off with SOS pad. (I tested tonight) The Y pipe is not coated and has the usualy thin layer of surface rust. Again comes off with sos pad. Its all stainless steel.
#24
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
None of the pipes are crimped also. Every piece can come part. I used all band clamps. All the clamps will be included. (4)
#26
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Headers sold pending payment.
#27
Supreme Member
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Can you give me a shipped price for the pushrods to 87108, Alb., New Mexico?
#28
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Per my post the $35.00 price was with shipping! Let me know!
#29
Supreme Member
iTrader: (7)
Join Date: Nov 2006
Location: Alamogordo, NM
Posts: 3,740
Likes: 0
Received 10 Likes
on
10 Posts
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Willing to ship the "super deal"? If so, how much? I'm interested.
Last edited by Bullydawg; 06-13-2010 at 11:26 AM.
#30
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
No shipping. BTW Nice Car. Looks Identical.
#34
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Pic of Lifters, dogbones and hold down tray sent to whoever was interested.
Should have pics of heads tonight!
I also have a set of Proform Chevrolet chromred valve covers. Centerbolts. Inside has been notched to clear rockers. Also the outside lip was notched a tad to clear superram runners when installed with intake on. Once side though had the chevrolet logo paint flake off. VERY nice covers though. Can provide pics if needed. $35.00 + shipping.
Should have pics of heads tonight!
I also have a set of Proform Chevrolet chromred valve covers. Centerbolts. Inside has been notched to clear rockers. Also the outside lip was notched a tad to clear superram runners when installed with intake on. Once side though had the chevrolet logo paint flake off. VERY nice covers though. Can provide pics if needed. $35.00 + shipping.
#35
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Trick Flow Pushrods Sold.
#36
#39
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
Pulleys Sold
Last edited by Mkos1980; 06-15-2010 at 11:50 AM.
#40
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: OBD II Setup, 383 Shortblock, TF heads, Holley TB LPE Cam Rockers
I can toss these in for anybody who buys the heads for an extra 25 bucks. $35 + shipping for others. These are not the polished covers. These are the chromed. in excellant shape. One cover has 2 notches I had to add to get them to clear the superram runners when I had that setup. Also clearanced on the inside. 0 leaks. Also one side had the paint flake off. Very nice covers though. They clean up to a mirror finish.
#45
#46
Supreme Member
iTrader: (20)
Join Date: Aug 2007
Location: chicago
Posts: 1,111
Likes: 0
Received 1 Like
on
1 Post
Car: 87 GTA
Engine: 385 sbc
Transmission: 700r4
Axle/Gears: 2.73 posi
Re: 383 SBC, Comp Pro Mag Rockers, Holley 52 TB LPE219, AC Delete Pulley, New SBC Sta
Do the injectors come with the miniram? If so what size,, thanks Sean
#47
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: 383 SBC, Comp Pro Mag Rockers, Holley 52 TB LPE219, AC Delete Pulley, New SBC Sta
Holley TB and Valve Covers Sold.
As for the injectors, the intake has been long gone. I have a set of 8 LS1 injectors 28lbs. 26 I think at TPI pressure. $50.00 shipped.
As for the injectors, the intake has been long gone. I have a set of 8 LS1 injectors 28lbs. 26 I think at TPI pressure. $50.00 shipped.
Last edited by Mkos1980; 06-23-2010 at 09:24 PM.
#49
Member
iTrader: (1)
Join Date: Aug 2001
Location: Thomasville Pa USA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 SC Camaro drag car
Engine: 406
Transmission: Th350
Axle/Gears: 8.5 10 bolt 4.10
Re: 383 SBC, Comp Pro Mag Rockers,LPE219, AC Delete Pulley, New SBC Starter
are the rockers 3/8 or 7/16??
#50
Supreme Member
Thread Starter
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Re: 383 SBC, Comp Pro Mag Rockers,LPE219, AC Delete Pulley, New SBC Starter
3/8th
But now I have the engine, rockers and cam pending sale.
But now I have the engine, rockers and cam pending sale.