Terry Kennedy

iTrader: (5)

vortech s-trim kit upgraded to r-trim, fits 82-92 camaro/firebird with tpi complete with brackets, could also sell kit to fit smallblock carbed blowthrough setup. $2500 obo http://www.vortechsuperchargers.com/product.php?p=106

Powerdyne supercharger for LT-1 camaro/firebird completed kit with brackets, has broken internal belt can be fixed for about $50 $1000 obo as is

20# nos bottle $200 obo or trade for nos 10# with highflow valve

Hooker longtube 2210's coated inside and out, very little run time. $650 shipped to lower 48

2004 chevy colorado x-cab 5cyl auto, 87xxx miles, k&n air intake system 20in wheels lowered and kicker stearo system has some hail damage
$7000 obo

Single gauge pillar pod black

Dual gauge pillar pod black

Triple gauge pod for dash mount carbon fiber

Fuel log

MSD Pro billit distrubuter dont know part number.

Flamed pre 87 sbc valve covers

Autometer 5291 Elec. Speedo sender

Hyper racing alm. strut mounts

have some energy suspension bushings check pic to see what's left.

some tpi parts, and black interior from 82-92 camaro

58mm linenfilter tb $275 shipped to lower 48

hurst quater stick for pg or reverse pattern 3 speed gm $100

set of 16" 95 TA wheels with tire's

set of 16" 91 rs camaro wheels

2 rear 88 IROC wheels 16" double line have been drill for tubes

1 single line 16x8 IROC wheel

set of 16x9.5 C4 Corvette Sawblade Rims

set of 17" black zr1 wheels on 4th gen f-body with tires

stock 88 IROC gas tank

stock 88 IROC 145mph gauge cluster

2-t-top bags

2-cargo shades

77lb/hr bosch injectors 2.7 bar, 3 ohm impedence part # B280412911/3v3456 $250 shipped

88 IROC parts car or project $300 with title and spare parts, come look at it. located in Stillwater OK 74074

any questions give me a call 405 612 4313 Terry

http://s226.photobucket.com/albums/d...20sale%20pics/

trades welcome all price's plus shipping

T-rock

Do you have black door sills.Thanks.troc

rv34

Interested in the drag springs..front and back?

Wildebird

iTrader: (2)

Energy Suspension polyurethane motor mounts in black $20

Are these the mounts which use the stock clamshells? Part number? Does the $20 include shipping? Are they new or used?
Thanks, Clint

one92rs

iTrader: (5)

how much for the a/c delete controls----77573

robbyk85

Looking for a TPI harness 86-89?

Terry Kennedy

iTrader: (5)

Door sills as in the piece that goes under the door covers edge of carpet? I belive I do, I dont have any door pieces for the top of door to the door panel, sold

Yes drag springs are front and back, set of 4 sold

motor mounts pt # ENS-3-1116G yes uses stock claim shell, yes new will also include the clam shells, and price is plus shipping since they are $25 each new with out the shells sold

a/c delete controls how about $40 shipped

I have a tpi harness from a 88 IROC I think the only thing cut from it was the duel fan plug in's. make offer

T-rock

Yes those are the door sills,I sent you a PM.Thanks.T-Rock

Door sills as in the piece that goes under the door covers edge of carpet? I belive I do, I dont have any door pieces for the top of door to the door panel

markymarco

iTrader: (10)

what kind of trades are you interested in i want those drag springs

Wildebird

iTrader: (2)

Price for the mounts shipped to 32615, dont really need the clamshells, I have a set already.

Terry Kennedy

iTrader: (5)

What do you have to trade, need sbc parts, coilovers, ect.

Terry Kennedy

iTrader: (5)

$30 shipped

Wildebird

iTrader: (2)

PM'D

RU1NER

iTrader: (1)

What year are the ac delete controls from?

Duts87ss

iTrader: (10)

What are you asking for the serpentine brackets (I only want the two aluminum brackets)?

Terry Kennedy

iTrader: (5)

I have no idea I bought them on here a long time ago for my car and dont have a heater any more so I dont need them.

Terry Kennedy

iTrader: (5)

$75

RU1NER

iTrader: (1)

Do you know if they are vacuum controlled or cable? What color lettering? Thanks

IROC-Z_Racing

iTrader: (1)

You said a lot of TPI parts. You still have the TPI air intake assembly? All I need is the "Y" piece with the air intake temperature sensor in place or for it to have a location where the sensor fits into, and the plastic base where the "Y" mounts onto in front of the radiator (where the hood latch is). How much would you ask for this? Also could you post a picture with the TPI air intake assembly?

Thanks,
- Justin

84TransAmEU

iTrader: (1)

Looking for Knock sensor for a 350 TPI. Also looking for a PROM chip for a 350 TPI (year 1987 - maybe 88 will also fit)
Thanks

Terry Kennedy

iTrader: (5)

I'll check and get back to everybody by the weekend at the latest,

I think the controls are yellow lettered not sure about the vacumn or cable I'll look,

I think I have the y also I'll let you know

same for the knock sensor think I have it and I do have the prom

C-Titan

iTrader: (2)

take a hundred shipped for the heater box??

Shipping would be to 19426

Terry Kennedy

iTrader: (5)

the heater controls are white letter and vacumn controled.

Terry Kennedy

iTrader: (5)

I'll do $125 shipped

IROC-Z_Racing

iTrader: (1)

You still got a TPI Air Intake assembly with the base/radiator cover attached? How much are you asking for it?

94-6spd

Could you send info on the r-trim? CFM ratings and capable hp. pwedmonds4@yahoo.com

Terry Kennedy

iTrader: (5)

pm's sent let me know if I missed anybody

Duts87ss

iTrader: (10)

Wow, somehow I missed your reply on the serp. brackets. Can you get me a shipping estimate to 39564?

Thanks.

88FormulaKiller

iTrader: (8)

their called scuff plates, door sills are on the top of the door panel

Terry Kennedy

iTrader: (5)

$90 shipped

Duts87ss

iTrader: (10)

Do you have a PayPal address? If so, you'll have the money tonight.

sailtexas186548

iTrader: (2)

i'm not finding an "s-trim" upgraded to an "r-trim" as an option on vortechs site, can you please clarify that? and is it v-1, v-2, etc..?

and does the vortech come with the cold side and FMU?

Terry Kennedy

iTrader: (5)

yes it is gen3camaro88@aol.com

Terry Kennedy

iTrader: (5)

It's because the S-trim and R-trim are no loger produced, They have changed the design of the s to the si and discontinued the r-trim. Vortech doesn't even list a system for a thirdgen anymore. The R-trim is a v-1 capable of 24 psi 1100 cfm and 750hp. It does come with the cold side and the fmu. If you have any other question just let me know. http://www.vortechsuperchargers.com/product.php?p=106

C-Titan

iTrader: (2)

From what I just read, I think the heater boxes maybe year specific due to the different connections on the fan... Did this come off your 88??

Duts87ss

iTrader: (10)

Money sent.

Wildebird

iTrader: (2)

Great seller, received the mounts quickly!!
Clint

Terry Kennedy

iTrader: (5)

added parts

Terry Kennedy

iTrader: (5)

door sills and serp. brackets were shipped out today.

Terry Kennedy

iTrader: (5)

ttt

DARKmj16

iTrader: (6)

the set of 88 iroc wheels 16", is it a set of 4? do they have tires mounted on em? curb rash? umm center caps? some pics to nfsbaby@yahoo.com if you could please. o and ofcourse an asking price?

TommyG

Mr Kennedy we Talked and I am on it! Brb In a Min With those pics!

Terry Kennedy

iTrader: (5)

Yes it's a set of 4, no tires, I don't think all the center caps are there but I will double check when I get pic's. Thanks Terry

TommyG

pics sent!

Terry Kennedy

iTrader: (5)

pm sent

jersyboyy

iTrader: (8)

Got a full stock exhaust for a v8 thirdgen pm me if you do

racing geek

iTrader: (5)

Do you have the power steering bracket from a non AC car that didn't use a serpentine bracket?

TommyG

Pm sent.

DARKmj16

iTrader: (6)

price for iroc rims? shipped to 24015?

Terry Kennedy

iTrader: (5)

Sorry no exhaust or power steering bracket.