383
#1
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
383
i think im going to part my project got a 1989 firebird selling as is runs and drives for 1300 and if you want the 383 stroker to it will be 2600 other wise motor seperate will be 1500 will not ship you pick up the whole car like i said it runs and drives take it out every day no the 383 is not in it it has a 305 in it now hopefully doindg the motor swap this weekend unless there interest in the car or motor. best way to reach me is by phone as i am not on here much. Thanks for looking Nick 608 525 0444
#3
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
i can get some pics up but its not completly assembled the heads are still wrapped in plastic from the machine shop and the short block is still wrapped from the machine shop and the pan is off stilll
but i will get them up in a day or so
but i will get them up in a day or so
#5
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
well what kind of puntuation are you looking for and what details? IT a 350 block bored .30 with a 400 crank fresh polish, hone, bearings, and rings. the heads are 882 with 2.02 intake valves and 1.60 exhaust the block is a 1969-1979 2 bolt main 350 if you have any other questions let me know
#7
Member
iTrader: (2)
Join Date: Jan 2006
Location: Ettrick WI
Posts: 103
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: 383
this was my motor before it was rebuilt, pulled very hard and ran excellent, has a tpis hyd cam 490-490 lift , worked well in my 92 Z with stealthram and all the goodies. I went BIGGER.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
bumb nobody needs a motor for there project may be entertaning trades depending on what you got. the heads are torqued down now and the only thing left to do is put the pan and fron assembly on
#9
Junior Member
Join Date: Sep 2008
Location: Central Illinois
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Pontiac Firebird
Engine: 3.1L V6 (just stock for now)
Transmission: Automatic
Re: 383
I might be interested in taking the 383 off your hands, but I would need it delivered or shipped. I live in El Paso, IL.
#10
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
ok i would deliver it half way to you for 1 dollar per mile shipping would cost a fortune its like 5 and a half hours from me to your place so let me know
#11
Junior Member
Join Date: Sep 2008
Location: Central Illinois
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Pontiac Firebird
Engine: 3.1L V6 (just stock for now)
Transmission: Automatic
Re: 383
Any possiblility you could deliver it all the way? If not I would have to figure something out because I dont have a trailer.
#12
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
ok heres the deal i will deliverit to your door for 1800 or 1500 and one dollar per loaded mile wichever is cheapest let me know but i dont want to drive all the way there and you tell me you dont want it.
#15
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
bump come on i know some one needs a new motor may seperate the heads from the short block or sell as a whole may trade what do you got call or email 608 525 0444
#16
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
look guys i know the price is scaring you away sounds to cheap to be true beut it is all true and is fresh never stared the reason is so cheap is because i need it out of the shop running out of room and places to work on things so come get it best reasonable offer or trade what you got the worst i can tell you is know
#17
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
need it gone guys i know someone needs a new motor will seperate heads from short block and sell that way let me know
#19
Junior Member
Thread Starter
Join Date: Jun 2008
Location: Ettrick, WI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro z03 z28
Engine: 5.7 tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: 383
i currently have a brand new set of gm 882 heads that were machined for bigger valves 2.02 intake and 1.60 exhaust the heads are complete and fresh never fired on just torqued down i paid 400 dollars fot them would like to get most of my money back out of them
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
10-08-2015 08:34 PM