Intakes, Fuel Rail, AFPR, Injectors, Runners
05-31-2009, 09:07 PM
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Nov 2000
Location: Alabama
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Intakes, Fuel Rail, AFPR, Injectors, Runners
Make Offer
Fuel Rail with Holley AFPR (SOLD)
19lb/hr Injectors $50
Ported Stock Intake (Entry ports only, non-polished finish) $100
Ports at entrance range from 1.55-1.6". Room for additional porting. I just cleaned up the entrances basically, nothing extravagant. Willing to port additional if requested, siamezing, etc.
Stock Intake with EGR Valve $50 (Can port for additional $50)
Stock Runners (NO DENTS) $50
Might have a Ported Plenum for $100
very rough porting that needs finishing. Willing to finish porting if interested
Fuel Rail with Holley AFPR (SOLD)
19lb/hr Injectors $50
Ported Stock Intake (Entry ports only, non-polished finish) $100
Ports at entrance range from 1.55-1.6". Room for additional porting. I just cleaned up the entrances basically, nothing extravagant. Willing to port additional if requested, siamezing, etc.
Stock Intake with EGR Valve $50 (Can port for additional $50)
Stock Runners (NO DENTS) $50
Might have a Ported Plenum for $100
very rough porting that needs finishing. Willing to finish porting if interested
Last edited by smithtc; 06-17-2009 at 02:59 PM. Reason: pictures, additional comments on parts
06-04-2009, 01:51 PM
#3
Senior Member
Thread Starter
iTrader: (5)
Join Date: Nov 2000
Location: Alabama
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Re: TPI Parts (Ported)
gauging interest on plenum
Porting needs to be finished, but this is the current state.
Additional pics of anything available upon request
Porting needs to be finished, but this is the current state.
Additional pics of anything available upon request
Thread
Thread Starter
Forum
Replies
Last Post
