I have a pair of stripped L98 heads that were ported by a local machine shop. They do need new valve guides.

Looking for $100 shipped.

 

Give me a shipping price to 24382

 

PM sent

 

Actually, I checked and they still have their springs on. The car had a ~510 lift cam with those springs, they aren't stock.

$100 shipped or $50 local. Come on people!

 

how much were they ported and what was the factory runner size anyway?

 

Not sure about the exact numbers, these came with my last engine. I'll try to get a picture of the ports.

 

Price down to $20 local or $80 shipped.

 

where is palm bay in relation to like miami?

 

About 170 miles north. I come down to Miami sometimes though, so something could be arranged.

 

hmm well i live in coral springs which is north of miami ( i justsaid miami cause EVERYONE knows miami ) when do u think the next time will be when u are around here? i dont NEED them but an extra set cant hurt

 

Next weekend probably. I will PM you if I'm headed your way.

 

awesome let me know. i gotta see if i can scrounge up some cash also lol

 

Are those the 58 CCL 98 heads that will fit the 12 bolt TPI manifold where the four center bolts are at 72°?

 

price shipped to 86409 and what size are the valves? 1.94 or 2.02

 

Price is $80 shipped anywhere. I'll measure the valves if I find a ruler, I have no idea what size they are.

 

have any pics?
they rusted or cracked or anything?

 

I'm working on getting pics, trying to find my camera. Other than the valve guides that are shot, the heads are in excellent condition. They are not cracked or rusted or anything.

 

Casting # is 14101083 by the way.

 

Some crappy pics: http://www.datalogs.net/car/ported_L98s/

Still looking for my camera =\

 

Still have these. Great price especially for central FL locals.

 

$60 shipped to T5X-5Y4

 

I'll pass, the shipping is going to be more than that.

 

So do the heads come with the valves and springs as shown in the pictures? Could you take a picture of the combustion cambers?

 

Yeah they do. Heads were in storage when I posted this so I was not sure.

 

i did notice one thing about your pix - unlike the akunimum ones you dont have to try to find an outside source for the head to feed into the intake manifold and the erg. these have a pass through into a stock tpi. too bad i dont have a 350 or i would buy them - 64 cc a little big for a 305 - 6 cc too big.
nice heads though - good luck

 

the heads are stock l98 gasket matched on the intake side, the springs took a cam at .530 lift and i believe they are comp springs. Valves are stock 1.94's on the intake and 1.5s on the exhaust i believe.


dont worry denis, ill save you

 

pm sent

 

SOLD

 

good for you - glad they are going to a good home.