Forged roller 383 210 AFR 1054 Part out
12-04-2008, 11:44 AM
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Forged roller 383 210 AFR 1054 Part out
Due to a non paying buyer on the whole motor, I am now parting out the whole thing. Prices do not include shipping. Motor is currently together, and removed from car, pics will be posted later tonight.
bottom end/lifters/cam have ~6k miles on it. The topend has about 1200miles on it. This motor has seen several bottles of nitrous but no more then 115rwhp was ever gained due to flow limitations of the NOS topshot.
Short block is a wheeler performance built 383 using a 010 4 bolt main block, scat forged crank, scat forged H beam rods, and KB -18cc forged pistons. Engine only smoked when on the dyno, and the throttle was closed at 6500 RPMs. There are traces of oil in the intake, so im assuming this is from the PCV sucking up some oil. I have not seen this engine smoke while being on the road/track.
Heads are the new AFR 1054 210cc 65cc eliminators that came out this year. They will come with comp cams 950 dual springs installed at 1.92"
383 Short block $1,200.00
AFR 210 heads $1,300.00
XR288 cam $175.00 12-433-8 hydro roller 236/242 .520/.540 110lsa
Comp retrofit hydro lifters $250.00
1.52 7/16 CC pro mag rockers $225.00 CCA-1304-16
Cloys roller timing cover $75.00 CLO-9-221 (handy for retro fit roller cams, as you can set cam end play with cover installed)
Edelbrock Victor series black valvecovers $50.00 EDL-41733 (one has a small crack from being too tight, leaks few drops of oil per 100-200 miles)
ARP 6pt head studs $85.00
10lb Nano competition kit $450.00
Vortec RPM air gap intake $150.00 PN EDL-7516
standard RPM air gap intake $150.00 EDL - 7501
K&N extreme air filter $85.00 KNN-66-3040 (I think thats the PN) filtered top and 3x14" air filter
bottom end/lifters/cam have ~6k miles on it. The topend has about 1200miles on it. This motor has seen several bottles of nitrous but no more then 115rwhp was ever gained due to flow limitations of the NOS topshot.
Short block is a wheeler performance built 383 using a 010 4 bolt main block, scat forged crank, scat forged H beam rods, and KB -18cc forged pistons. Engine only smoked when on the dyno, and the throttle was closed at 6500 RPMs. There are traces of oil in the intake, so im assuming this is from the PCV sucking up some oil. I have not seen this engine smoke while being on the road/track.
Heads are the new AFR 1054 210cc 65cc eliminators that came out this year. They will come with comp cams 950 dual springs installed at 1.92"
383 Short block $1,200.00
AFR 210 heads $1,300.00
XR288 cam $175.00 12-433-8 hydro roller 236/242 .520/.540 110lsa
Comp retrofit hydro lifters $250.00
1.52 7/16 CC pro mag rockers $225.00 CCA-1304-16
Cloys roller timing cover $75.00 CLO-9-221 (handy for retro fit roller cams, as you can set cam end play with cover installed)
Edelbrock Victor series black valvecovers $50.00 EDL-41733 (one has a small crack from being too tight, leaks few drops of oil per 100-200 miles)
ARP 6pt head studs $85.00
10lb Nano competition kit $450.00
Vortec RPM air gap intake $150.00 PN EDL-7516
standard RPM air gap intake $150.00 EDL - 7501
K&N extreme air filter $85.00 KNN-66-3040 (I think thats the PN) filtered top and 3x14" air filter
Last edited by MaxxMitchell; 12-05-2008 at 07:35 AM. Reason: Added PNs to most items
12-04-2008, 12:46 PM
#3
Senior Member
Join Date: Mar 2007
Location: Muscatine IA
Posts: 574
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Firebird Formula
Engine: 383
Transmission: built 700r4
Axle/Gears: 4.11, 9inch
Re: Forged roller 383 210 AFR 1054 Part out
hey do you mind shootin me a part number for those intakes
thnx zig
thnx zig
12-05-2008, 07:37 AM
#5
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: Forged roller 383 210 AFR 1054 Part out
Pictures added, wow didnt know the flash made it all look so dirty.
12-09-2008, 02:09 PM
#6
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: Forged roller 383 210 AFR 1054 Part out
nano has sold,open to offers
12-18-2008, 07:47 AM
#7
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: Forged roller 383 210 AFR 1054 Part out
Short block has sold
Timing cover has sold
standard head RPM airgap has sold
Timing cover has sold
standard head RPM airgap has sold
Trending Topics
12-21-2008, 06:29 PM
#11
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Re: Forged roller 383 210 AFR 1054 Part out
Im still interested in the heads for what I offered via PM and email. Just waiting on people interested in my 383.
I have 3 potential people who im dealing with. So you know how it goes.
I have 3 potential people who im dealing with. So you know how it goes.
01-05-2009, 08:24 AM
#12
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: Forged roller 383 210 AFR 1054 Part out
Updated forsale list
383 Short block SOLD
AFR 210 heads $1,300.00
XR288 cam SOLD 12-433-8 hydro roller 236/242 .520/.540 110lsa
Comp retrofit hydro lifters SOLD
1.52 7/16 CC pro mag rockers $225.00 CCA-1304-16
Cloys roller timing cover SOLD CLO-9-221 (handy for retro fit roller cams, as you can set cam end play with cover installed)
Edelbrock Victor series black valvecovers $50.00 EDL-41733 (one has a small crack from being too tight, leaks few drops of oil per 100-200 miles)
ARP 6pt head studs $85.00
NOS Topshot module/hardlines/bulk head fittings $125
Vortec RPM air gap intake $150.00 PN EDL-7516
standard RPM air gap intake SOLD EDL - 7501
K&N extreme air filter $85.00 KNN-66-3040 (I think thats the PN) filtered top and 3x14" air filter
383 Short block SOLD
AFR 210 heads $1,300.00
XR288 cam SOLD 12-433-8 hydro roller 236/242 .520/.540 110lsa
Comp retrofit hydro lifters SOLD
1.52 7/16 CC pro mag rockers $225.00 CCA-1304-16
Cloys roller timing cover SOLD CLO-9-221 (handy for retro fit roller cams, as you can set cam end play with cover installed)
Edelbrock Victor series black valvecovers $50.00 EDL-41733 (one has a small crack from being too tight, leaks few drops of oil per 100-200 miles)
ARP 6pt head studs $85.00
NOS Topshot module/hardlines/bulk head fittings $125
Vortec RPM air gap intake $150.00 PN EDL-7516
standard RPM air gap intake SOLD EDL - 7501
K&N extreme air filter $85.00 KNN-66-3040 (I think thats the PN) filtered top and 3x14" air filter
01-13-2009, 07:35 AM
#13
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: Forged roller 383 210 AFR 1054 Part out
Pending sale on the AFR heads, if interested please notify me quickly.
Thread
Thread Starter
Forum
Replies
Last Post
