AFR 210 383 Running engine
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
AFR 210 383 Running engine
Going to try and sell my current engine air filter to pan: $5100 shipped to a terminal/hub near you.
Engine is assymbled, has ~3500 miles on the bottom end/cam/lifters/carb, and ~250 miles on the pushrods/rockers/springs/ti retainers/heads/intake/late model truck starter. I can even toss in the cast iron water pump!
Engine: 9.3:1 compression
010 350 factory 4bolt main
Scat 4340 forged crank
Scat 4340 forged H beam rods
Kieth Black Forged 18.6cc dish pistons
Laser etched balancer (works like fluidamper)
ARP head studs
Valvetrain
Cloys 2pc timing cover with ext adj cam button
Comp XR288 retro roller hydro cam
Comp retro fit hydro roller lifters
Manley 7.400 1pc pushrods
Comp Pro Mag 1.52 7/16 non SA rockers
Comp Ti retainers
Comp 950 valve springs installed at 1.91"
Induction:
Edelbrock Extream air cleaner assymbly (filtered top)
Holley HP 750 Mech secondary carb, I can include a jet kit as well for another $20
Edelbrock RPM Air gap intake
AFR 1054 210cc 65cc eleminator heads
Edelbrock black powder coated valve covers
This motor runs very well, pulls smooth, and does not smoke. Wanting to sell so that I can switch to a BBC. Motor is currently installed in running condition in my firebird. The idea with the low compression was to suite a turbo down the road.
I can get pictures later.
Engine is assymbled, has ~3500 miles on the bottom end/cam/lifters/carb, and ~250 miles on the pushrods/rockers/springs/ti retainers/heads/intake/late model truck starter. I can even toss in the cast iron water pump!
Engine: 9.3:1 compression
010 350 factory 4bolt main
Scat 4340 forged crank
Scat 4340 forged H beam rods
Kieth Black Forged 18.6cc dish pistons
Laser etched balancer (works like fluidamper)
ARP head studs
Valvetrain
Cloys 2pc timing cover with ext adj cam button
Comp XR288 retro roller hydro cam
Comp retro fit hydro roller lifters
Manley 7.400 1pc pushrods
Comp Pro Mag 1.52 7/16 non SA rockers
Comp Ti retainers
Comp 950 valve springs installed at 1.91"
Induction:
Edelbrock Extream air cleaner assymbly (filtered top)
Holley HP 750 Mech secondary carb, I can include a jet kit as well for another $20
Edelbrock RPM Air gap intake
AFR 1054 210cc 65cc eleminator heads
Edelbrock black powder coated valve covers
This motor runs very well, pulls smooth, and does not smoke. Wanting to sell so that I can switch to a BBC. Motor is currently installed in running condition in my firebird. The idea with the low compression was to suite a turbo down the road.
I can get pictures later.
Last edited by MaxxMitchell; 11-06-2008 at 02:21 PM.
#2
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: AFR 210 383 Running engine
Any intrests if I part out the motor?
Probably sell the bottom end for $1200 + shipping
Heads for $1200 with the springs + shipping
I can shoot pricing on the rest if theres interests in the big stuff.
Probably sell the bottom end for $1200 + shipping
Heads for $1200 with the springs + shipping
I can shoot pricing on the rest if theres interests in the big stuff.
#3
Re: AFR 210 383 Running engine
I may be interested in the heads at a lower price. I'm not trying to low ball... just short on funds for this project. Also, can you post the part number for the cam?
#4
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: AFR 210 383 Running engine
12-433-8 http://store.summitracing.com/partde...8&autoview=sku
Im pretty firm on the head price just due to the shortage of them available used.
Im pretty firm on the head price just due to the shortage of them available used.
#5
Re: AFR 210 383 Running engine
12-433-8 http://store.summitracing.com/partde...8&autoview=sku
Im pretty firm on the head price just due to the shortage of them available used.
Im pretty firm on the head price just due to the shortage of them available used.
#6
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2003
Location: shawnee, ks
Posts: 713
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Firebird
Engine: 5.3 76mm
Transmission: Rossler TH400, PTC converter
Axle/Gears: Strange 12bolt, 3.08s
Re: AFR 210 383 Running engine
Complete motor sold this morning, collecting payment this afternoon from a local buyer. Thanks all that were interested in one part or another.
Thread
Thread Starter
Forum
Replies
Last Post