383 LT1 In CT - 450HP - 0 Miles!
05-28-2008, 11:33 AM
#1
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
383 LT1 In CT - 450HP - 0 Miles!
gone
Last edited by TP355Z; 06-11-2016 at 10:37 PM.
05-28-2008, 05:31 PM
#2
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
gone
Last edited by TP355Z; 06-11-2016 at 10:37 PM.
05-29-2008, 06:39 AM
#3
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
I'll also accept offers for those interested.
05-30-2008, 07:03 AM
#4
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
OFFERS PEOPLE!!! PLEASE!!!!! I've got this AND a 1984 Mustang GT that I've GOT to move.
:-)
:-)
Trending Topics
06-03-2008, 01:35 PM
#8
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
-
Last edited by TP355Z; 05-27-2015 at 08:45 PM.
06-03-2008, 03:28 PM
#9
Senior Member
iTrader: (1)
Join Date: Feb 2008
Location: Waynesville ohio
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 corvette Z51
Engine: L98
Transmission: doug nash 4+3 speed
Axle/Gears: 3:42 posi
Re: 383 LT1 In CT - 450HP - 0 Miles!
Sounds like what i want but were so far apart. good luck.
kevin
kevin
06-03-2008, 05:23 PM
#10
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
That's ok man.
Bumpity bump bump.
Bumpity bump bump.
06-03-2008, 08:02 PM
#12
Senior Member
iTrader: (1)
Join Date: Jan 2007
Location: CT
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 305 TPI
Transmission: 700-R4
Axle/Gears: 3.23
Re: 383 LT1 In CT - 450HP - 0 Miles!
damn i wish i had money to blow..you live like 5 minutes away
06-03-2008, 08:08 PM
#13
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
How much money DO you have to blow? lol
06-04-2008, 12:06 PM
#16
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Good luck.
Last edited by TP355Z; 06-11-2016 at 10:38 PM.
06-04-2008, 07:43 PM
#17
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Bump
Make offers guys.
Make offers guys.
06-04-2008, 09:18 PM
#19
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Sorry, I couldn't take $2k.
06-04-2008, 09:28 PM
#20
Member
Re: 383 LT1 In CT - 450HP - 0 Miles!
didn't expect you too. thought it was a chance in hell. good luck
06-05-2008, 07:37 AM
#21
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Thanks.
Bumpitty bump bump.
Bumpitty bump bump.
06-05-2008, 08:18 AM
#22
Member
Join Date: May 2008
Location: Battle Ground, WA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevy Silverado
Engine: 350 Crate
Transmission: Turbo 400 w/ shift kit
Axle/Gears: dana60/corp14 4.10 gears
Re: 383 LT1 In CT - 450HP - 0 Miles!
Craigslist and ebay brother!!! Nice engine wish I had the cash. Fit perfect in the Old 83!!
06-05-2008, 10:06 AM
#23
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Price Lowered To: $3300
Also Now Includes:
Brand New (Still In Box) 1LE Delete A/C Pulley
New Opti (Accel)
New Timing Cover (GM)
Used Chrome Valve Covers
Also Now Includes:
Brand New (Still In Box) 1LE Delete A/C Pulley
New Opti (Accel)
New Timing Cover (GM)
Used Chrome Valve Covers
06-05-2008, 10:56 AM
#24
Member
Join Date: May 2008
Location: Battle Ground, WA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevy Silverado
Engine: 350 Crate
Transmission: Turbo 400 w/ shift kit
Axle/Gears: dana60/corp14 4.10 gears
Re: 383 LT1 In CT - 450HP - 0 Miles!
We just had twins or i would have that on a semi on it's way to Washington right now.!! I will keep my ears open over hear for ya.
Trey
Trey
06-06-2008, 07:25 AM
#25
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Another beautiful day.
Bump.
Bump.
06-06-2008, 07:47 AM
#26
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 383 LT1 In CT - 450HP - 0 Miles!
damn. If I hadn't just bought a motor I would pick this up.
Your not looking for a forged GEN1 386 by anychance? lol
I am looking to go over to FI, but have too much invested in the carb setup I have now.
(student too)
I am a mechanical engineer too! 4 weeks left for my bachelors, then heading right back in for my masters in Sept! Ugh...
Anyways, SICK deal. I have a motor and like $500 haha.
Your not looking for a forged GEN1 386 by anychance? lol
I am looking to go over to FI, but have too much invested in the carb setup I have now.
(student too)
I am a mechanical engineer too! 4 weeks left for my bachelors, then heading right back in for my masters in Sept! Ugh...
Anyways, SICK deal. I have a motor and like $500 haha.
06-06-2008, 08:41 AM
#27
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
g
Last edited by TP355Z; 06-11-2016 at 10:39 PM.
06-06-2008, 12:10 PM
#28
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 383 LT1 In CT - 450HP - 0 Miles!
Go to my cardomain, there are MORE than enought pics there.
I paid $6300 for my setup.
Cost me just about all the $ i had at the time. lol.
Forged eagle crank,
forged rods,
forged pistons,
Trickflow heads, 74cc chambers, 195cc Runners, CNC comb chamers (Al),
RPM airgap with endurashine finish
MSD pro billet dizzy
77 truck block
hydrolic roller lifters retrofitted (for the non roller block)
Huge cam, 242/254 duration
Holley 750 DP with chokeless main body and adj, air bleeds.
Barless N20 plate
welded al valvcovers.
1.5 trickflow RR
chromoly pushrods
SS valves
Think thats about it
Car dynoed with 340 HP and 340 TQ to the wheels with a T-56. Think there is a problem with the exhaust, It was dented in and might have been casuing the #s to be lower than they should. I also hear that my spintech muffler robs power.
It just tipped the 4000 mile mark.
I am not looking to get rid of it like the flu, its a good motor. I just would love the benefits of F.I. and the driveability.
But if I loose any power it just isn't worth it, not just yet.
Esspecially since I KNOW that I can find more with this setup.
Anyways, thats my state.
-Later.
I paid $6300 for my setup.
Cost me just about all the $ i had at the time. lol.
Forged eagle crank,
forged rods,
forged pistons,
Trickflow heads, 74cc chambers, 195cc Runners, CNC comb chamers (Al),
RPM airgap with endurashine finish
MSD pro billet dizzy
77 truck block
hydrolic roller lifters retrofitted (for the non roller block)
Huge cam, 242/254 duration
Holley 750 DP with chokeless main body and adj, air bleeds.
Barless N20 plate
welded al valvcovers.
1.5 trickflow RR
chromoly pushrods
SS valves
Think thats about it
Car dynoed with 340 HP and 340 TQ to the wheels with a T-56. Think there is a problem with the exhaust, It was dented in and might have been casuing the #s to be lower than they should. I also hear that my spintech muffler robs power.
It just tipped the 4000 mile mark.
I am not looking to get rid of it like the flu, its a good motor. I just would love the benefits of F.I. and the driveability.
But if I loose any power it just isn't worth it, not just yet.
Esspecially since I KNOW that I can find more with this setup.
Anyways, thats my state.
-Later.
Last edited by dennisbernal91z; 06-06-2008 at 01:39 PM.
06-06-2008, 12:21 PM
#29
Member
Join Date: May 2008
Location: Battle Ground, WA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevy Silverado
Engine: 350 Crate
Transmission: Turbo 400 w/ shift kit
Axle/Gears: dana60/corp14 4.10 gears
06-06-2008, 12:48 PM
#30
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
If you want to talk trade I'm listening.
06-06-2008, 02:10 PM
#32
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 383 LT1 In CT - 450HP - 0 Miles!
To be completely honest, I didn't have the motor I have dyno tunned b4 it went in.
But if I was to rip it out and go over to cast parts as opposed to my forged, and get FI,
I wouldn't bother with all the trouble unless it was dynoed and I knew what it made. Thats just the reality of where I am with my car right now. I NEED to know exactly what I am getting myself into.
I am sure you know what I mean...
But if I was to rip it out and go over to cast parts as opposed to my forged, and get FI,
I wouldn't bother with all the trouble unless it was dynoed and I knew what it made. Thats just the reality of where I am with my car right now. I NEED to know exactly what I am getting myself into.
I am sure you know what I mean...
06-06-2008, 03:32 PM
#33
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
I understand. Good luck either way. :-)
06-08-2008, 07:13 AM
#35
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
This motors got to move!!!
06-10-2008, 10:16 AM
#36
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Price Lowered To $3200 (w/o Carburetor + Crank)
Somebody buy this thing or I'm going to just bundle it with my IROC and sell it all!!!!
Somebody buy this thing or I'm going to just bundle it with my IROC and sell it all!!!!
06-11-2008, 11:08 AM
#37
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Final Asking Price: $3100.
BUMP.
BUMP.
06-11-2008, 11:18 AM
#38
Member
Join Date: May 2008
Location: Battle Ground, WA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevy Silverado
Engine: 350 Crate
Transmission: Turbo 400 w/ shift kit
Axle/Gears: dana60/corp14 4.10 gears
Re: 383 LT1 In CT - 450HP - 0 Miles!
Lookin like it's time to bundle. Wish I had the cash. EBAY or CRAIGSLIST.COM
Try those,
Trey
Try those,
Trey
06-13-2008, 02:40 PM
#39
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
Car And Motor Are Now Bundled On Thirdgen.org (here), Cars.com, and Autotrader.com.
GO LOOK!
GO LOOK!
06-13-2008, 02:48 PM
#40
Member
Join Date: May 2008
Location: Battle Ground, WA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevy Silverado
Engine: 350 Crate
Transmission: Turbo 400 w/ shift kit
Axle/Gears: dana60/corp14 4.10 gears
06-16-2008, 06:38 PM
#41
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
PRICE LOWERED TO $2700 FOR EVERYTHING!!!!!!! (WAS $3500, $5000 INVESTED)
BUMP
BUMP
06-17-2008, 07:29 AM
#42
Member
Join Date: May 2008
Location: Battle Ground, WA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevy Silverado
Engine: 350 Crate
Transmission: Turbo 400 w/ shift kit
Axle/Gears: dana60/corp14 4.10 gears
06-17-2008, 11:02 AM
#43
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
No way. lol. I need the $$ not to post bail.
06-18-2008, 08:11 AM
#44
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
.
Last edited by TP355Z; 06-11-2016 at 10:40 PM.
06-19-2008, 05:27 PM
#45
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
.
Last edited by TP355Z; 06-11-2016 at 10:40 PM.
06-20-2008, 06:06 AM
#47
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: 383 LT1 In CT - 450HP - 0 Miles!
.
Last edited by TP355Z; 06-11-2016 at 10:40 PM.
06-23-2008, 07:05 PM
#50
Member