I have an 86 camaro and I'm looking to part it out. I don't have any more time or money to put into the car. If you see something you like or if you like to make an offer for the whole car then just pm me. I'm open for prices on the items on my list.

350 with gm performance fast burn heads, edelbrock air gap rpm intake, 1.6 rr, comp cams XE 268 cam

griffin aluminum radiator

2 gauge A-pillar with vacuum/boost and temp autometer gauges

brand new 3" single exhaust w/ cat and flowmaster muffler

Mcleod T56 clutch

700r4 that needs rebuild (have everything for rebuild minus clutch and bands)

140 mph speedo

Anything off the car you can think of or have questions about. Local pickup only for the big stuff, but anything smaller I can ship.

 

What rear is in the car? Posi/Gears?

Let me know!

Thanks!

-Tyler

 

10 bolt with 3.23

 

Does you camaro have the BLH ESC knock module?

 

Is it a posi unit? How much for the carrier and gears shipped to 58079?

Let me know!

Thanks!

-Tyler

 

Pm sent about the gauge.

 

I also have a partial rebuild kit for a 700R4 that has the super servo (better than corvette) a 13 vane pump, all the soft parts, a 2800 stall torque converter, and the upgraded nozzles. A few other things to note:

I have spohn lower control arms that are pretty new 120 shipped

I have new tires on it with the original Z28 rims (make offer local pickup)

The 700r4 that is in it I'll let go for cheap

Any interior parts or exterior

The engine is great condition and has plenty of power. If not interested in entire engine I'll sell the heads seperate (383 aluminum fastburns 1000).

Thanks for the interest so far.

 

Hey there, do you have the upper black pieces that the seatbelt goes through and clips to the headliner in black??? rectangular horn button? hatch bumpers/stoppers?

 

im interested in the tranny rebuild kit. Any more info on it, pics, and what are you looking to get for it?

 

How old/how much mileage is the McLeod clutch, and which version is it? How much for it shipped to 14305?

Also, the griffin rad, is it specific for the 3rd gen, or just a universal? If it's 3rd gen specific, how much shipped to 14305?

Thanks

 

I appreciate all the interest and if you haven't gotten a response from me then please pm me because I have a lot of traffic with different items.

holley jet kit with squirters and cams make an offer on that.
chrome 2.5 to 3" exhaust tips that are brand new in box and wrapping looking for 30 shipped for those.
chrome air cleaner with a K&N air filter. Good for HEI setups because it has the demples on the base plate 35 shipped.
red hotchkis strut tower brace with brackets 120 shipped

I forgot to mention that the car is red on red so I hope that helps with the interior, although the dash is black. I also don't have the original steering wheel it has been changed out with a 3 spoke grant. Once again thanks for the interest and I'm trying my best to keep up with everyone.

 

How much for the air gap intake?

 

Sent you a pm about the intake

 

how about the a/c brackets where the a/c mounts above the power steering pump? or an a/c delete puley

 

pmed you

 

bump

 

i never got the email with the pics of the pulleys/brackets

 

how much you want for the a/c bracket?

 

how much for the servo and is the 86 cluster compatible with an '89 iroc z?

 

How much for the headman 1 5/8 headers?

 

just curious how that car with because it is very very similar to my setup.

 

The car does pretty good the times I was driving it around. I haven't taken it for a spin in a while because the front seal on the trans is leaking pretty bad. I was going to change it out to a t56, but I started college and time/money isn't allowing me to put anything into it. So far I have a lot of interest but no serious buyers. The only buyer thats been serious so far is Mr. wolf (which I appreciate). Problem is that without more serious buyers I'm not willing to part it because I won't get any money out of it. Right now its looking like I'm going to have to pull the tranny fix the seal and put the partial rebuild kit in it that I have and sell the car whole. Sorry to have to say that, but like I said if I can't get more people on board then I'll have to shut down.

 

I was waiting on the part number and pics of the gauges. You got them?

 

Alright looks like I have some more guys on board so I'll go ahead with the parting. Keep up the interest! I really appreciate the interest so far. Here are some price updates:

gmpp fastburns 1000 shipped
t56 mccleod clutch 400 shipped
rpm air gap intake 170 shipped
spohn lca's 120 shipped
griffin radiator 250 shipped
hei distributor (summit version) 100 shipped
hedman shorter headers (D-port style) 100 shipped
2800 stall torque converter 200 shipped
super servo 80 shipped
13 vane pump 40 shipped
high pressure nozzle 20 shipped
(I can also work a package deal on all the auto trans parts 250 shipped w/manual and soft parts)
K&N air ram for a holley carb (deal that smooths out the air entering the carb) 40 shipped

 

bump

 

Have another item to add to the list:

A-pillar two gauge pod w/ boost/vac gauge (autometer) 40 shipped

 

ttttt

 

how bout the tail lights? good condition? if so how much to send them to 92284? thanks

 

Still have these items plus a whole car. I dropped some of the prices for quicker sales.


holley jet kit with squirters and cams make an offer on that.
chrome 2.5 to 3" exhaust tips that are brand new in box and wrapping looking for 30 shipped for those.
chrome air cleaner with a K&N air filter. Good for HEI setups because it has the demples on the base plate 35 shipped.
gmpp fastburns 1000 shipped
t56 mccleod twin disc strreet clutch 450 shipped
rpm air gap intake 170 shipped
spohn lca's 120 shipped
griffin radiator 250 shipped
hei distributor (summit version) 100 shipped
hedman shorter headers (D-port style) 80 shipped
2800 stall torque converter 200 shipped
super servo 70 shipped
13 vane pump 30 shipped
high pressure nozzle 15 shipped
(I can also work a package deal on all the auto trans parts 250 shipped w/manual and soft parts)
K&N air ram for a holley carb (deal that smooths out the air entering the carb) 40 shipped
A-pillar two gauge pod w/ boost/vac gauge and temp gauge (autometer)
70 shipped

 

tttt

 

Did the Strut tower brace sell?

 

Sorry its already gone.

 

This is what I still have plus most the car:

holley jet kit with squirters and cams make an offer on that.
chrome 2.5 to 3" exhaust tips that are brand new in box and wrapping looking for 30 shipped for those.
chrome air cleaner with a K&N air filter. Good for HEI setups because it has the demples on the base plate 35 shipped.
gmpp fastburns 1000 shipped
t56 mccleod twin disc strreet clutch 450 shipped
rpm air gap intake 170 shipped
spohn poly lower control arms 120 shipped
griffin radiator 250 shipped
hei distributor (summit version) 100 shipped
hedman shorter headers (D-port style) 80 shipped
K&N air ram for a holley carb (deal that smooths out the air entering the carb) 40 shipped

(I can also work a package deal on all the auto trans parts 250 shipped w/manual and soft parts)
Seperated trans parts:
2800 stall torque converter 200 shipped
super servo 70 shipped
13 vane pump 30 shipped
high pressure nozzle 15 shipped



Sold:

A-pillar two gauge pod w/ boost/vac gauge and temp gauge (autometer)
70 shipped
Strut tower brace 120 shipped

 

bump

 

bump

 

PM sent

 

bump

 

....

 

***Update***

This is what I still have plus most the car:

holley jet kit with squirters and cams make an offer on that.
chrome 2.5 to 3" exhaust tips that are brand new in box and wrapping looking for 30 shipped for those.
chrome air cleaner with a K&N air filter. Good for HEI setups because it has the demples on the base plate 35 shipped.
gmpp fastburns 1000 shipped
t56 mccleod twin disc strreet clutch 400 shipped
rpm air gap intake 160 shipped
spohn poly lower control arms 120 shipped
griffin radiator 250 shipped
hei distributor (summit version) 100 shipped
hedman shorter headers (D-port style) 80 shipped
K&N air ram for a holley carb (deal that smooths out the air entering the carb) 40 shipped

(I can also work a package deal on all the auto trans parts 250 shipped w/manual and soft parts)
Seperated trans parts:
super servo 70 shipped
13 vane pump 30 shipped
high pressure nozzle 15 shipped



Sold:

A-pillar two gauge pod w/ boost/vac gauge and temp gauge (autometer)
70 shipped
Strut tower brace 120 shipped
2800 stall torque converter 200 shipped

 

What condition is the radiator in?

 

is the rad. 3rd gen specific?

 

**Update 2**

Still up for grabs plus most the car:

holley jet kit with squirters and cams make an offer on that.
chrome 2.5 to 3" exhaust tips that are brand new in box and wrapping looking for 30 shipped for those.
chrome air cleaner with a K&N air filter. Good for HEI setups because it has the demples on the base plate 35 shipped.
gmpp fastburns 1000 shipped
t56 mccleod twin disc strreet clutch 400 shipped
rpm air gap intake 160 shipped
spohn poly lower control arms 120 shipped
griffin radiator 250 shipped
hei distributor (summit version) 100 shipped
hedman shorter headers (D-port style) 80 shipped
K&N air ram for a holley carb (deal that smooths out the air entering the carb) 40 shipped

(I can also work a package deal on all the auto trans parts 125 shipped w/manual and soft parts)
Seperated trans parts:
super servo 70 shipped
13 vane pump 30 shipped
high pressure nozzle 15 shipped



Sold:

A-pillar two gauge pod w/ boost/vac gauge and temp gauge (autometer)
Strut tower brace
2800 stall torque converter 200
140 MPH gauge cluster
Both A-pillars

 

ttt

 

ttt

 

Very interested in the block....it was a 350 right?Is it sold? if not please send picks to GMODUDE@aol.com of casting #s etc. Plus im interested in theintake please send picks of both.Please send picks of both and can pick up engine for the right deal.
----------
I am wanting the price of bare block unless the heads are aluminum in the case the heads r aluminum i need prices and pics of both. thank you

 

sent pics and email.

 

do you have the dash pad ?

 

Yes, but its not in that great of condition. I just used a dash cover that matched my interior. If you interested in that then let me know.

 

Do you still have roller rockers? are they 7/16 stud?

 

I still have the roller rockers, but I have 3/8 screw in studs on the heads. I'm also waiting to hear from another member if he's going to take the whole engine.