Pocket

iTrader: (24)

Open to offers too

Pro-Race Aluminum heads (pair)
NEW bare
+.100 height - requires +.100 valve stems and push rods
2.02/1.60 64cc
Angle plugs
Screw in studs
Acc mount holes
GONE

Forged pushrods - 16
1 piece
+.100 length
Used, unknown mileage
$25

http://i150.photobucket.com/albums/s...S/HPIM0082.jpg

Arias pistons set of 8
NEW with wrist pins no rings or retainers
4.00" (stock 350)
Not sure of the dome height or CR I can take a caliper height if you like
Forged aluminum - Arias makes a damn quality part
$250

http://i150.photobucket.com/albums/s...S/HPIM0078.jpg

Childs & Albert rods set of 8
NEW includes 12 point rod bolts
5.7" length
Forged aluminum
$300

http://i150.photobucket.com/albums/s...S/HPIM0087.jpg

Scorpion Full Roller Rockers - 16
1.5 Ratio
Includes poly locks
Used, look new
GONE

Spark plugs
NEW
AC Delco VF440LS +4 points
Set of 80
High dollar plugs
$2 each or $140 for all of them

http://i150.photobucket.com/albums/s...S/HPIM0079.jpg

ISKY Rods set of 8
Angled
Un cut
NEW forged alum
$120

http://i150.photobucket.com/albums/s...S/HPIM0077.jpg

Cheesy Pedal covers
Sis bought em for the Fiero and i took them right back off
Unknown brand
$10

http://i150.photobucket.com/albums/s...S/HPIM0086.jpg

All interested persons should PM their ZIP for a shipping quote
More parts to come

Pocket

iTrader: (24)

Front and mid motor plates $35 each or both for $60


Crane Rev Kit used $120



Dry Sump
6 stage
Got this off a NASCAR dealer, supposedly it had jsut been freshened up. I was going to have it redone and atleast painted better before i used it
Come with the cog $200



Dry sump pan 2 piece rear main SBC
Used and abused by a circle track guy
Two drivers side pickups $20


Used double valve springs set of 16
Unknown specs
GONE

Pushrods set of 16
Forged 1 piece +.100 length
GONE

Reed roller cam
.618 int .618 ex
Used good cond $140


Arias forged pistons 4.125" SBC 400 set of 10
Not sure why theres 10 thou
New with rings
3 piece full floater wrist pins $300

Pocket

iTrader: (24)

Bump

Pocket

iTrader: (24)

bump

irocman88

what size are the runners on the heads? do you possibly have any flow numbers?

Pocket

iTrader: (24)

I have no specs on the heads
I got them in an email before i bought them, but that was 2 computers ago

I can take a caliper measurement of the ports if youd like
Thats about as specific as I can go

irocman88

Casting numbers maybe?

Pocket

iTrader: (24)

Updated

Pocket

iTrader: (24)

bump

WheelsUp84z

iTrader: (2)

i'll take the motor plates, shipped to 72023 AR please, thank you

Pocket

iTrader: (24)

WheelsUp - PM sent waiting for response

Bump

WheelsUp84z

iTrader: (2)

i'm just gonna need the front one, let me know how much the shipping is and you're paypal addy, thanks