dpm90iroc

MILLED DOWN & INTAKE ANGLE CORRECTED BY AFR, 7/16 STUDS, TITANIUM RETAINERS, 1.437 SPRINGS GOOD TO 550 LIFT REPLACED IN 03, NO EGR, SET UP FOR PERIMETER VALVE COVERS, CONVENTIONAL INTAKE BOLT PATTERN, BOUGHT BIGGER SET FOR NEW MOTOR, NEW IN 01, PAID $1500, ASKING 900 OR BO+SHIP

bneuberthz

How many miles have you put on? You've had them for 5 years, what intake angle or whatever was corrected? I am pretty sure I can afford these at the moment. Can I please get pics asap to Bneuberthz@hotmail.com. Only thing that sucks is only .550 lift on the springs, the lpe superram cam is .560 .560 with 1.6 rr's. Even so it should be easy to change the springs with the heads off. Please email me, I replied first and am calling dibs if allowed, this is what I have been looking for. Shipping costs to sykesville, md 21784. If there is a copy post nearby where you live, you can take them in, or weight them and go in with weight and dimensions and compare DHL, Fedex, and UPS, that is what is so cool about Copy Post stores. I'd like you to email me pics and the info, but I am already pretty much sold on them, did you have any problems with the rocker arm studs like I read on a thread in the aftermarket product research board.
Regards,
Robert Neuberth
Bneuberthz@hotmail.com
Phone (443) 985 0919

dpm90iroc

About 20,000 mi, only drive 8 mo's of yr up here, AFR cast's these heads at 64cc, it's $150 to shave them down to 58cc, & u have to cut head where the intake bolt's up to match.
U can run 560 lift, AFR says there's a margin of error built in, I ran ur exact set up for 2yrs(went 12.3's@110mph) b4 goin to a carbed 383
It was $60-70 to ship from Cal to my house to give ya an idea, I'll shop around
I never had any rocker stud problems, probably b/c I optioned for the bigger 7/16 studs
It'll be this wkd b/4 I can get ya pics b/c I work 12 hrs a day, these heads were the best investment I ever to go fast

bneuberthz

As I said, I should be able to afford these right now, I will begin to gather the funds, what are the payment options? If you do have a copy post near by, I am in the mail order business and for parts like cylinder heads I do a COD where the buyer can pay with a check, money order, or cash. Paypal could be possible, though this is a lrage amount, maybe it can work. That's awesome I can use the lingenfelter cam, also worst case scenario I could switch down to 1.5 rockers for simplicity, I think the superram cam is meant to have the 1.6's though. They are perimeter valve cover, you had a roller cam/block setup though correct? If so, do you have the pushrods, or know which ones I will need. My intake is setup for both pre and post 86.

dpm90iroc

I'd like to do paypal, or u can send me a check or money order, & I'll ship as soon as the check clears. We don't have copy post up here.

Yes, I do have Trick Flow hardened pushrods, 7.20 in length, costs $80-85 new, hows $30 sound.
I'll call ya today

bneuberthz

thanks for calling today. if I can't do paypal by monday I will send a check on monday. I'll call you tomorrow

racnboy87

hey dpm90iroc<SCRIPT type=text/javascript> vbmenu_register("postmenu_2894860", true); </SCRIPT> im having i set of 64cc heads milled down just like yours. you said they charged $150 to shave them down to 58cc. can u tall me how much they charged to correct the intake angle?

dpm90iroc

It's included in the milling price

dpm90iroc

$850 OR BO+ SHIPPING

dpm90iroc

ttt

85C4

iTrader: (1)

PM sent

11SEC91Z

iTrader: (4)

t

dpm90iroc

Wen't 10.68@ 126mph, on 125 shot of spray

dpm90iroc

ttt

vernw

iTrader: (2)

So, do you still have these heads? If so, I'm interested!!!

Got any pictures you can email me?

dpm90iroc

Sorry, these r sold, thanks