TBI NITROUS KIT
02-03-2008, 04:31 PM
#1
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
TBI NITROUS KIT
since this is TGO, im gonna offer up something different here than other websites...
this sale includes EVERYTHING i have to put this on a tbi car:
TBI FEED LINE, already spliced for a fuel gauge AND the FUEL solenoid FEED
THE 14x3 AIRFILTER I HAVE ALREADY NOTCHED for this kit
THE gold spacer ring i have already modified to fit this kit
THE nitrous jets are FOR 11psi of fuel pressure. you need to either buy a adjustable fpr OR do what i did and break the tack weld off the stock fpr and adjust it to 11psi.
im sure im forgetting something here but everything i used on my car will go with this sale.
up for grabs is a HSW dual nozzle wet it.
comes with the bottle, brackets, feed line, bottle gauge, both nozzles, both solenoids - the nitrous solenoid is pretty new, i only ran 3 bottles through it, also has the bulkhead fittings for the nozzles , the two "tee" fittings, and the lines from the Tees to the nozzles. also has jets for 11psi fuel pressure, 100,125,150, and 200 jets. 16 jets in all. also has the "revolution" hsw heater, and the manifold / pressure cut off switch for the automatic heater. comes with both relays and whatever wire is still attached, i also have the switch panel i made for it.
i would LIKE to see 550 come from this, but im open to offers.
cant think of what im forgetting right now... but thats off the top of my head.
new it was 600 something for everything i got. not to mention the air filter, and the fuel line mods i did, and the fp gauge.
TGO specific pictures...
you can see the fuel line mod im talking about, i will include that entire fuel line, from the frame rail TO the TBI unit.
super easy install, just wire and roll out.
http://s38.photobucket.com/albums/e1...stivamach1.flv
video...
http://youtube.com/watch?v=KfbJFGcx0SY
and this one....
you can email me at
cls-chicago@hotmail.com
or get in touch with me on here via pm
or talk to me on aim at allstock92
peace.
this sale includes EVERYTHING i have to put this on a tbi car:
TBI FEED LINE, already spliced for a fuel gauge AND the FUEL solenoid FEED
THE 14x3 AIRFILTER I HAVE ALREADY NOTCHED for this kit
THE gold spacer ring i have already modified to fit this kit
THE nitrous jets are FOR 11psi of fuel pressure. you need to either buy a adjustable fpr OR do what i did and break the tack weld off the stock fpr and adjust it to 11psi.
im sure im forgetting something here but everything i used on my car will go with this sale.
up for grabs is a HSW dual nozzle wet it.
comes with the bottle, brackets, feed line, bottle gauge, both nozzles, both solenoids - the nitrous solenoid is pretty new, i only ran 3 bottles through it, also has the bulkhead fittings for the nozzles , the two "tee" fittings, and the lines from the Tees to the nozzles. also has jets for 11psi fuel pressure, 100,125,150, and 200 jets. 16 jets in all. also has the "revolution" hsw heater, and the manifold / pressure cut off switch for the automatic heater. comes with both relays and whatever wire is still attached, i also have the switch panel i made for it.
i would LIKE to see 550 come from this, but im open to offers.
cant think of what im forgetting right now... but thats off the top of my head.
new it was 600 something for everything i got. not to mention the air filter, and the fuel line mods i did, and the fp gauge.
TGO specific pictures...
you can see the fuel line mod im talking about, i will include that entire fuel line, from the frame rail TO the TBI unit.
super easy install, just wire and roll out.
http://s38.photobucket.com/albums/e1...stivamach1.flv
video...
http://youtube.com/watch?v=KfbJFGcx0SY
and this one....
you can email me at
cls-chicago@hotmail.com
or get in touch with me on here via pm
or talk to me on aim at allstock92
peace.
02-04-2008, 09:31 PM
#7
Member
Join Date: Oct 2007
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc z
Engine: 350 carbed
Transmission: built 700 R4 2200 stall
Axle/Gears: 3.73 10 bolt
Re: TBI NITROUS KIT
no offense but u do know they make tbi nos plates right? instead of hackin the filter up and s%$t
Trending Topics
02-04-2008, 09:37 PM
#9
Member
Join Date: Oct 2007
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc z
Engine: 350 carbed
Transmission: built 700 R4 2200 stall
Axle/Gears: 3.73 10 bolt
Re: TBI NITROUS KIT
looks a lil better than ur hack job but w/e, seemed liek it worked somewat i dont need it anyway
ps nice duct tape
ps nice duct tape
Last edited by camaro55427; 02-04-2008 at 10:12 PM.
02-04-2008, 11:06 PM
#10
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
hackjob? are you insane?
it worked amazingly.
when is the last time your 305 tbi walked a stalled / exhuast lightning?
how about an 03 mach 1?
mmmmhmmmmmmmm....
duct tape was to provide somewhat of a buffer to the ss lines. i never got around to ******* the edge with r/c car flex fuel line.
ps. jack ***.
it worked amazingly.
when is the last time your 305 tbi walked a stalled / exhuast lightning?
how about an 03 mach 1?
mmmmhmmmmmmmm....
duct tape was to provide somewhat of a buffer to the ss lines. i never got around to ******* the edge with r/c car flex fuel line.
ps. jack ***.
02-05-2008, 09:50 AM
#11
Member
Join Date: Oct 2007
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc z
Engine: 350 carbed
Transmission: built 700 R4 2200 stall
Axle/Gears: 3.73 10 bolt
Re: TBI NITROUS KIT
umm if u say so, ur vids show it gettin beat almost everytime and yeaa,i have seen a LO3 run like a bad out of hell, my buddys has heads, intake, custom prom, 454 tbi, regulator, built trans 3.73\'s, it would smoke ur NOS LO3 kit ha, sorry for bein honest
02-05-2008, 12:37 PM
#12
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
throw some time slips up of what your buddy has ran.
and some receipts of total cost.
and your own. don't talk **** unless you can back it up. also wouldn't advise talking **** for other people....
----------
I just saw that your 17.
:rofl:
and some receipts of total cost.
and your own. don't talk **** unless you can back it up. also wouldn't advise talking **** for other people....
----------
I just saw that your 17.
:rofl:
Last edited by Reputation7; 02-05-2008 at 12:38 PM. Reason: Automerged Doublepost
02-05-2008, 02:08 PM
#13
Member
Join Date: Oct 2007
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc z
Engine: 350 carbed
Transmission: built 700 R4 2200 stall
Axle/Gears: 3.73 10 bolt
Re: TBI NITROUS KIT
ill show ya, but im gonna stop and be the bigger man
Last edited by camaro55427; 02-05-2008 at 02:12 PM.
02-06-2008, 11:58 AM
#19
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: TBI NITROUS KIT
id rather run a plate kit also, i prefer to have the nitrous after the butterflies.
02-06-2008, 12:32 PM
#20
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
great.
id prefer to have the ability to run up to a 400 shot. and have hood clearance.
edit:
also dont have to worry about ****in up the throttle linkage, modifiying the geomtetry of it and whatnot, not to mention the resetting of the TV cable.. but to each there own right?
also, if you use the plate kits, you realize you have to drill and tap a tiny hole in the FPR right?
with this crap im selling, i include the entire line from the fuel rail to the tbi unti, has the necesary fittings to feed the fuel solenoid AND provides a gauge that runs up to the cowl.
no drilling and tapping required. and you can keep your stock tbi feed line without hacking it up. incase you wanna take the kit off later.
id prefer to have the ability to run up to a 400 shot. and have hood clearance.
edit:
also dont have to worry about ****in up the throttle linkage, modifiying the geomtetry of it and whatnot, not to mention the resetting of the TV cable.. but to each there own right?
also, if you use the plate kits, you realize you have to drill and tap a tiny hole in the FPR right?
with this crap im selling, i include the entire line from the fuel rail to the tbi unti, has the necesary fittings to feed the fuel solenoid AND provides a gauge that runs up to the cowl.
no drilling and tapping required. and you can keep your stock tbi feed line without hacking it up. incase you wanna take the kit off later.
Last edited by Reputation7; 02-06-2008 at 12:36 PM.
02-06-2008, 12:40 PM
#21
Supreme Member
Join Date: Nov 2006
Location: NY sucks
Posts: 1,724
Likes: 0
Received 1 Like
on
1 Post
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: TBI NITROUS KIT
You talk alot of smack for your age.... i don't talk s*** and i'm 17, and i'll bet i know how to do alot more than you... i have been working on cars since i was like 5. and i can do almost ANYTHING on an engine. and i know how to do bodywork too. i'm not trying to be an A** i'm just showing you the facts, don't act like you know everything. cause i know i don't, but i do know alot. now fight over, he's selling his stuff so leave him alone. he didn't put it up for you to bash it.
Last edited by v10viper04; 02-06-2008 at 12:41 PM. Reason: Automerged Doublepost
02-06-2008, 02:19 PM
#22
Member
Join Date: Oct 2007
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc z
Engine: 350 carbed
Transmission: built 700 R4 2200 stall
Axle/Gears: 3.73 10 bolt
Re: TBI NITROUS KIT
actually i do kno alot for my age, ive rebuilt motors,ive been workin on cars since i was young too, and i kno some body work and welding, and i talked to the guy and were kewl so ya, i just didnt liek how he had it set up, ok? and u cant say that u know more cause actually no ones can say who knows more about cars,i told him i was done talkin about it also so now lets get back to topic
Last edited by camaro55427; 02-06-2008 at 02:29 PM.
02-06-2008, 02:43 PM
#23
Supreme Member
iTrader: (2)
Join Date: Aug 2007
Location: Fairhope, AL
Posts: 2,529
Likes: 0
Received 1 Like
on
1 Post
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: TBI NITROUS KIT
boy i just had to 
at all the crazy talk
Reputation7, take it with you to the next meet we have, you may get a buyer there or maybe someone willing to swap parts, i would rather put it on something else other than my maro , maybe the honda, or dj82z28's honda ......... or my old beeter mini van LOL, that would be crazy, sprayin in a mini van
at all the crazy talkReputation7, take it with you to the next meet we have, you may get a buyer there or maybe someone willing to swap parts, i would rather put it on something else other than my maro , maybe the honda, or dj82z28's honda ......... or my old beeter mini van LOL, that would be crazy, sprayin in a mini van
02-06-2008, 05:12 PM
#24
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
i guess. its pretty versatile being a dual nozzle kit, you get the ability to spray an enormous shot (2 nozzles rather than 1) and its a nozzle... so it fits anything.
would like to spray the turbo setup but... well see if i can hit 650rwhp without it.... might have to use that extra little 50 shot.
would like to spray the turbo setup but... well see if i can hit 650rwhp without it.... might have to use that extra little 50 shot.
02-06-2008, 09:37 PM
#25
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: p'cola FL
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: TBI NITROUS KIT
can i purhase the kit for 50 bucks, then offer the rest of the sale price to the other members in this thread that are out of their minds? mental help gets expensive.
if its junk, or you dont like it, dont post. this isnt the "what do you think about my nitrous setup" section.
sorry....
back to the scheduled program.
if its junk, or you dont like it, dont post. this isnt the "what do you think about my nitrous setup" section.
sorry....
back to the scheduled program.
02-07-2008, 12:07 AM
#26
Senior Member
iTrader: (6)
Join Date: May 2005
Location: Beech Bluff,TN
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: TBI NITROUS KIT
WOW..I'm glad I looked at this one
dude props on your handy work...I've been looking for an inexpensive way to shoot some NOS to a TBI..and will keep your idea in mind.......poorfolk like myself have to make $hit work the best it will with what we have.....
dude props on your handy work...I've been looking for an inexpensive way to shoot some NOS to a TBI..and will keep your idea in mind.......poorfolk like myself have to make $hit work the best it will with what we have.....
02-07-2008, 01:30 AM
#27
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
fyi, all i did was review my choices. lots of plate kits, nx had a tbi kit which in the online instruction manual shows a pic of two nozzles in the gold ring. how can they charge 800 bucks for that? i found a cheaper kit, dual nozzle, told them my fuel psi, they sent the right jets, and i modified the ring. ill tell you what its not as simple as just drilling two holes in the ring either. you gotta put them in the EXACT right spot or the ring wont sit right.
02-12-2008, 11:45 PM
#32
Supreme Member
iTrader: (6)
Join Date: Apr 2005
Location: CT
Posts: 1,459
Likes: 0
Received 1 Like
on
1 Post
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
Re: TBI NITROUS KIT
lol thanks but my solenoids are red and blue
but anyways im trying to help the sale go to the tbi section some guy wants to nitrous a crossfire and i think this would be perfect minus the gold ring and air filter for a custom setup.
but anyways im trying to help the sale go to the tbi section some guy wants to nitrous a crossfire and i think this would be perfect minus the gold ring and air filter for a custom setup.
02-13-2008, 07:34 AM
#33
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
problem. the reason i used the two nozzles on the tbi unit is because i can point each one down a throttle bore. with the crossfire you could only nitrous half the engine. haha. less you stuck one nozzle in each tbi, but then ... who knows the distribution on that.
02-13-2008, 06:55 PM
#34
Supreme Member
iTrader: (6)
Join Date: Apr 2005
Location: CT
Posts: 1,459
Likes: 0
Received 1 Like
on
1 Post
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
Re: TBI NITROUS KIT
yea crossfire is single bore tbis basically our tbis cut in half in new spots. i figured one nozzle for each tb or my best one was tap into the intake manifold in 2 spots so itll evenly distribute itd be so much easier.
02-13-2008, 08:49 PM
#35
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
oooh.. then yea that would work. it would work good.
he could have a much easier time mounting the nozzles on that than my tbi ring. its a major pita to get them just perfect.
he could have a much easier time mounting the nozzles on that than my tbi ring. its a major pita to get them just perfect.
02-18-2008, 08:32 PM
#43
Junior Member
Join Date: Sep 2007
Location: AA County, MD
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird Formula
Engine: 305 TBI
Transmission: 700R4
Re: TBI NITROUS KIT
ill be coming into some birthday money in less than a month if you still have it then
02-18-2008, 09:43 PM
#44
Member
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: TBI NITROUS KIT
oh thank god. i entered this thread in total anticipation of more junk.
look ill hold it for you and knock 25 off the price. make it 525 and its ALL yours. your obviously a little far away to come down here and have me install it but i can help do anything online.
look ill hold it for you and knock 25 off the price. make it 525 and its ALL yours. your obviously a little far away to come down here and have me install it but i can help do anything online.
02-19-2008, 03:17 PM
#45
02-19-2008, 03:28 PM
#46
02-22-2008, 01:52 PM
#49