Color code chart on ECM ????
03-27-2002, 05:57 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2001
Location: Mechanicsburg,Pa usa
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92'Camaro RS
Engine: a loud one
Transmission: bolted to the engine
Color code chart on ECM ????
Anybody have or no where i can find the color code chart for the ECM on a 89' IROC 350 TPI ????????
03-27-2002, 09:03 PM
#2
TGO Supporter
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes
on
23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
http://www.deadbird.org/tech/87tpi01.gif
http://www.deadbird.org/tech/87tpi02.gif
http://www.deadbird.org/tech/87tpi03.gif
http://www.deadbird.org/tech/87tpi04.gif
It's for 87 but, the rest of the years shouldn't really differ much if any
http://www.deadbird.org/tech/87tpi02.gif
http://www.deadbird.org/tech/87tpi03.gif
http://www.deadbird.org/tech/87tpi04.gif
It's for 87 but, the rest of the years shouldn't really differ much if any
03-28-2002, 06:07 AM
#4
There's a couple differences between the 87 and 89 wiring that could mess someone up, like colors and apparently they went to the single IP connector in 89 where before they used two connectors so that the injectors and cooling fan were on a seperate connector. Later cars have the injector power wires and coolant fan on the large single connector. As far as the ECM pinnings themselves, I found it matched about 95% to the 86 diagrams that I found on diy-efi. edit: i'm saying the pinnings matched, just the some wire colors didn't. Just beware.
Last edited by Jza; 03-28-2002 at 06:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
08-20-2015 09:36 PM
