How to disable message center
12-22-2015, 07:56 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: SO MD
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS Camaro
Engine: 383
Transmission: 700R4
How to disable message center
My 92 RS was converted to a Carburated 650 cfm on a 383 and messages are not needed or accurate. How do I disable the message center?
12-23-2015, 03:13 PM
#2
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Message Unclear
If you’re referring to the SES Light you can turn the light off by disconnecting the brown wire with a
White stripe at the ECM.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If You’re In Front Of Me DON’T Slam On Your Brakes Just Because Someone At The Head Of The Pack Is Spinning
White stripe at the ECM.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If You’re In Front Of Me DON’T Slam On Your Brakes Just Because Someone At The Head Of The Pack Is Spinning
12-23-2015, 04:17 PM
#3
Junior Member
Thread Starter
Join Date: Dec 2011
Location: SO MD
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS Camaro
Engine: 383
Transmission: 700R4
Re: How to disable message center
Nina, Thank you. This will eliminate messages "Service Engine Soon" and "INFL BEST"? 
12-23-2015, 06:06 PM
#5
Junior Member
Thread Starter
Join Date: Dec 2011
Location: SO MD
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS Camaro
Engine: 383
Transmission: 700R4
Re: How to disable message center
AmorgetRS, Thank you. However, at this area of the cluster there is no bulbs.
12-23-2015, 08:41 PM
#6
Re: How to disable message center
Here is the back of cluster:
Only 4 of those bulbs are for the backlighting (the gray ones, I believe), the rest turn on certain lights (SES, INFL REST, Seat belt, Security, etc)
If you really wish to hack apart your wiring worse, here is the pinout for the custer. Just cut the wires leading to the cluster and tape them off:
I tried to find a nice picture with each of the bulbs labeled for you, but couldn't, and I don't have a 90-92 gauge cluster handy.
Only 4 of those bulbs are for the backlighting (the gray ones, I believe), the rest turn on certain lights (SES, INFL REST, Seat belt, Security, etc)
If you really wish to hack apart your wiring worse, here is the pinout for the custer. Just cut the wires leading to the cluster and tape them off:
I tried to find a nice picture with each of the bulbs labeled for you, but couldn't, and I don't have a 90-92 gauge cluster handy.
Thread
Thread Starter
Forum
Replies
Last Post
BrianH33478
Camaros for Sale
0
12-17-2015 03:05 AM