Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

flashers and hazzards wont blink!

Thread Tools
 
Search this Thread
 
Old 11-13-2012, 03:40 PM
  #1  
Junior Member
Thread Starter
 
86zBowtie's Avatar
 
Join Date: Jun 2011
Location: NY, damn snow
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 sport coupe z
Engine: 350 :)
Transmission: 700r4 B&M tranny
Axle/Gears: 2.73?
flashers and hazzards wont blink!

my 88 sport coupe is really on my nerves, both hazzards and flashers just illuminate, no blinking. whats the most common thing i should look at? i plan to replace the flasher but what else should i do? thanks!
Old 11-13-2012, 06:00 PM
  #2  
Supreme Member
iTrader: (1)
 
UNCLE TOM's Avatar
 
Join Date: Dec 2006
Location: ms. gulf coast
Posts: 2,403
Likes: 0
Received 4 Likes on 4 Posts
Car: 91 R/S , 89 dodge p/u
Engine: L31 GM crate re-cammed , 318
Transmission: T-5 , 4 speed auto
Axle/Gears: 3.42 , ?
Re: flashers and hazzards wont blink!

start by checking "ALL" bulbs & sockets . clean all sockets (scotch brite pads) brush inside of all sockets with a "LIGHT" coat of di-electric grease . clean base of all old bulbs (scotch brite again with a light coat of grease) . repair/replace any bad wires/connectors you might find . clean "ALL" dirty connectors you come across . all of the above apply to "ALL" elect. plugs , male & female . good luck .
Old 11-13-2012, 07:53 PM
  #3  
TGO Supporter

 
deadbird's Avatar
 
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes on 23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: flashers and hazzards wont blink!

I don't disagree with tom for bulb checking but, the hazard flasher relay should work even if only one bulb work. Rare both fail together. Make sure you even have flasher relays to start
Hazard and turn are separate circuits using different flasher relays.
Old 11-13-2012, 08:03 PM
  #4  
Supreme Member

iTrader: (3)
 
BigBadLou's Avatar
 
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes on 4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: flashers and hazzards wont blink!

Originally Posted by deadbird
Hazard and turn are separate circuits using different flasher relays.
Jut for clarification, there are no relays in the turn signal circuit, only flashers.
Old 11-13-2012, 08:25 PM
  #5  
TGO Supporter

 
deadbird's Avatar
 
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes on 23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: flashers and hazzards wont blink!

Thank you for the correction Lou. Brainfart on my part, my mistake.
Old 11-13-2012, 08:44 PM
  #6  
Supreme Member

iTrader: (3)
 
BigBadLou's Avatar
 
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes on 4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: flashers and hazzards wont blink!

No worries, I've had some of those myself.
Now for the million dollar question: what do brain farts smell like?
Old 11-13-2012, 10:47 PM
  #7  
TGO Supporter

 
deadbird's Avatar
 
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes on 23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: flashers and hazzards wont blink!

In my case... probably similar to the same place my head resides a lot of the time...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Electronics
13
02-09-2017 09:31 AM
Jk_Under
Electronics
3
09-02-2015 10:59 PM
FastAndFurious
Auto Detailing and Appearance
2
12-09-2001 06:58 PM
Yellow Camaro
Electronics
3
06-28-2001 09:29 AM



Quick Reply: flashers and hazzards wont blink!



All times are GMT -5. The time now is 10:17 AM.