Seqential Turn Signal, Round #4
#51
Senior Member
Join Date: May 2001
Location: Ames, Iowa, USA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Firebird Formula 350
Engine: 350 TPI
Transmission: 700r4
Re: Seqential Turn Signal, Round #4
Stephen, was just wondering on what you used for shipping so i knew what to look for. Glad it is USPS so it will be in my mail box and not sitting on my step.
As for the socket, I didnt doubt that you would have said something about the socket its just that I was wanting to get a heads up on what i was looking to get before your unit shows up.
http://www.partsamerica.com/productd...pe=758&PTSet=A
Take a look at this socket. I think it is the same socket that you mentioned but the part number is different. This one is 85832 and the one you mentioned is 85867. Let me know what you think and can't wait for the unit to arrive. I can't put it in until spring but at least i have it ready to go.
As for the socket, I didnt doubt that you would have said something about the socket its just that I was wanting to get a heads up on what i was looking to get before your unit shows up.
http://www.partsamerica.com/productd...pe=758&PTSet=A
Take a look at this socket. I think it is the same socket that you mentioned but the part number is different. This one is 85832 and the one you mentioned is 85867. Let me know what you think and can't wait for the unit to arrive. I can't put it in until spring but at least i have it ready to go.
#52
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
URL="http://www.partsamerica.com/productdetail.aspx?MfrCode=DOR&MfrPartNumber=85832&PartType=758&PTSet=A"]http://www.partsamerica.com/productdetail.aspx?MfrCode=DOR&MfrPartNumber=85832&PartType=758&PTSet=A[/URL]
Take a look at this socket. I think it is the same socket that you mentioned but the part number is different. This one is 85832 and the one you mentioned is 85867. Let me know what you think and can't wait for the unit to arrive. I can't put it in until spring but at least i have it ready to go.
Take a look at this socket. I think it is the same socket that you mentioned but the part number is different. This one is 85832 and the one you mentioned is 85867. Let me know what you think and can't wait for the unit to arrive. I can't put it in until spring but at least i have it ready to go.
I wonder if there really is a difference? Only thing I see is one has a foam gasket around the plug, one doesn't...Could the difference be in those 3 square "prongs" that line it up & lock it into place?
If you get 2 side by side & they are interchangeable, or use the one you found, lemme know. I'm always up for Editing the instructions as knowledge is learned.
When mine was built, there was no socket available. I had to buy a whole tail harness & hack it for 20 year old sockets!
#53
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Seqential Turn Signal, Round #4
Yup, looks like the stock socket, with the 3 keys etc. It shows as $7 for me here, how much does it show in your location? I thought the other sockets were originally $5. But since prices change often, I can't give you my word.
Lou
Lou
#54
Member
iTrader: (4)
Join Date: May 2006
Location: SE Michigan
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 15th Anv. T/A
Engine: HO 5.0
Transmission: TH700r4
Axle/Gears: not sure yet!
Re: Seqential Turn Signal, Round #4
I meant to ask, what happens to the turn signals when the brake is applied, do they not flash anymore?
#55
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
The turn & brakes utilize the same filament in the bulb, so he designed it so that brake overides the brake signal. In other words, if you are stopped at a stop sign, holding the brakes, then flip on a turn signal...The brake for that side only, will turn off & the turn signals start flashing!
I'll try to get a video of that Sunday, when I have a 2nd person to help video.
#57
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
OK...The last few units are in for Round 4. After these are sold out, I'm sure it'll be awhile until another batch is made.
$56 shipped, in the lower 48 states. International, Hawaii & Alaska shipping is available, but PM me first for the final cost.
Paypal payment to SteveCranford@Austin.rr.com, & Paypal only accepted if the funds are in your account. Credit Card funded transaction are not accepted. Or PM me for a mailing address if sending a M.O.
And please note your TGO user name, both in Paypal or M.O. payments.
$56 shipped, in the lower 48 states. International, Hawaii & Alaska shipping is available, but PM me first for the final cost.
Paypal payment to SteveCranford@Austin.rr.com, & Paypal only accepted if the funds are in your account. Credit Card funded transaction are not accepted. Or PM me for a mailing address if sending a M.O.
And please note your TGO user name, both in Paypal or M.O. payments.
#58
Senior Member
Join Date: May 2001
Location: Ames, Iowa, USA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Firebird Formula 350
Engine: 350 TPI
Transmission: 700r4
Re: Seqential Turn Signal, Round #4
Hey Stephen. Got my unit the other day. Won't be able to put it in until spring since my car is in storage for the winter. I was curious about the brakes as well. You say that they sequence until all the lights are on then they stay on? If thats the case, i think that will work out fine.
I also have a question about the installation. Since I have an 89 formula that I am putting the gta lights in I would just have to follow the gta instructions after doing the formula tail to gta tail mod and the under dash mod. It looks fairly simple to install. I will definitly post pics and vids once i get them done.
I also have a question about the installation. Since I have an 89 formula that I am putting the gta lights in I would just have to follow the gta instructions after doing the formula tail to gta tail mod and the under dash mod. It looks fairly simple to install. I will definitly post pics and vids once i get them done.
#59
Senior Member
iTrader: (1)
Join Date: Apr 2007
Location: Palm Coast, FL
Posts: 668
Likes: 0
Received 3 Likes
on
2 Posts
Car: 86 T/A & 88 GTA
Engine: 305 LB9 TPI & 350 LO5 TPI
Transmission: Jasper 4L60 x2
Axle/Gears: 2.77/posi LSD & 2.73/posi LSD
Re: Seqential Turn Signal, Round #4
Stephen, just curious as to what shipping method that you use. Do you ship through the mail or do you use something like UPS?
theimpaler68, where do you get the dual filamet sockts from? I have an 89 formula that I am putting in the gta tail lights on the car and I believe that I need to put in the extra dual filamet socket as well. If you could help me with this I would greatly appreciate it.
theimpaler68, where do you get the dual filamet sockts from? I have an 89 formula that I am putting in the gta tail lights on the car and I believe that I need to put in the extra dual filamet socket as well. If you could help me with this I would greatly appreciate it.
i usually get them at the junkyard. sometimes no cost.
#60
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Hey Stephen. Got my unit the other day. Won't be able to put it in until spring since my car is in storage for the winter. I was curious about the brakes as well. You say that they sequence until all the lights are on then they stay on? If thats the case, i think that will work out fine.
I also have a question about the installation. Since I have an 89 formula that I am putting the gta lights in I would just have to follow the gta instructions after doing the formula tail to gta tail mod and the under dash mod. It looks fairly simple to install. I will definitly post pics and vids once i get them done.
I also have a question about the installation. Since I have an 89 formula that I am putting the gta lights in I would just have to follow the gta instructions after doing the formula tail to gta tail mod and the under dash mod. It looks fairly simple to install. I will definitly post pics and vids once i get them done.
And yeah...After you swap to the GTA lights, just follow the GTA instructions plus the under dash mod for Formulas. I'd say the "hardest" part, was be the under dash part. And that's only because you can't simply sit in a chair & reach.
#61
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
As promised....And I'm uploading everybodies STS videos, if they send them to me. I hear about them, but never get to see them.
I even have one on a Caprice.
Full STS video
I even have one on a Caprice.
Full STS video
#62
Member
iTrader: (1)
Join Date: Jun 2008
Location: Waterloo, Iowa
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac Trans AM GTA
Engine: 5.7 LTR
Transmission: Automatic
Re: Seqential Turn Signal, Round #4
I'll upload mine in the spring of 2009. I'll also upload the headlamp change with h4 bulbs on my gta.
#64
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Amazing....Out of a list of 35 people that said they wanted one, less than half bought or even responded.....So, I have 10 left, ready to ship.....
I typically ship on Mondays, but when the opportunity presents itself to ship on other days, I do.
I typically ship on Mondays, but when the opportunity presents itself to ship on other days, I do.
Last edited by Stephen; 12-16-2008 at 10:51 AM.
#65
Junior Member
Join Date: Feb 2008
Location: California
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 Camaro/91 Camaro
Engine: 350/3.1 v6
Transmission: M22/stock
Axle/Gears: 3.73 GM 12 Bolt/stock
Re: Seqential Turn Signal, Round #4
Hey Stephen, i got my STS unit yesterday but i couldnt put it in cause it started raining... i also had to figure out the wiring because its not really the same for the camaro, but i got it done and i also got video. heres some of them that i took with my phone...
Left Signal With Brakes On
Right Signal With Brakes On
Hazards
If you need any more videos let me know and ill be able to get them for you
Thanks, Johnny
Left Signal With Brakes On
Right Signal With Brakes On
Hazards
If you need any more videos let me know and ill be able to get them for you
Thanks, Johnny
#66
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Woo Hoo!!!!!!!!!!! The first Camaro with STS!!!!!!!!
I'm confused though....You said something about having to figure out the wiring, but it all looks good.....
No 3rd brake light?
I'm confused though....You said something about having to figure out the wiring, but it all looks good.....
No 3rd brake light?
#67
Junior Member
Join Date: Feb 2008
Location: California
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 Camaro/91 Camaro
Engine: 350/3.1 v6
Transmission: M22/stock
Axle/Gears: 3.73 GM 12 Bolt/stock
Re: Seqential Turn Signal, Round #4
yea because the tailights are not like any of the ones in the diagrams in the instructions,
park-brake-turn---------turn-brake-park
so the wiring was a little different, and i also dont have a parking light out on the outside right now, but im probably gonna get a small led bulb for the outer parking lights so they come on also, oh and my hmsl is broken, the bulb doesnt stay in the socket and thats why its not on... im gonna go get one at pick n pull when theres a break in the rain.
park-brake-turn---------turn-brake-park
so the wiring was a little different, and i also dont have a parking light out on the outside right now, but im probably gonna get a small led bulb for the outer parking lights so they come on also, oh and my hmsl is broken, the bulb doesnt stay in the socket and thats why its not on... im gonna go get one at pick n pull when theres a break in the rain.
#68
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
yea because the tailights are not like any of the ones in the diagrams in the instructions,
park-brake-turn---------turn-brake-park
so the wiring was a little different, and i also dont have a parking light out on the outside right now, but im probably gonna get a small led bulb for the outer parking lights so they come on also, oh and my hmsl is broken, the bulb doesnt stay in the socket and thats why its not on... im gonna go get one at pick n pull when theres a break in the rain.
park-brake-turn---------turn-brake-park
so the wiring was a little different, and i also dont have a parking light out on the outside right now, but im probably gonna get a small led bulb for the outer parking lights so they come on also, oh and my hmsl is broken, the bulb doesnt stay in the socket and thats why its not on... im gonna go get one at pick n pull when theres a break in the rain.
What part of it was wrong? The under dash part? The tail light section wiring? As he owns a 91 Z28, he has no excuse....
Since the tail lights are really pretty simple to figure out without any diagram......
But the under dash car worked on another car so.....
Last edited by Stephen; 12-16-2008 at 08:53 PM. Reason: typos
#69
Junior Member
Join Date: Feb 2008
Location: California
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 Camaro/91 Camaro
Engine: 350/3.1 v6
Transmission: M22/stock
Axle/Gears: 3.73 GM 12 Bolt/stock
Re: Seqential Turn Signal, Round #4
it was the tailight wiring that was different... since theres only one brake light for the rear on the camaro, you have to make the turn signal bulb a dual filament and splice the turn signal wire which is yellow for the left and green for the right tailight, once you have that done you can splice the parking light form the brake light which is a brown wire and attach it to the extra wire coming from the dual filament that was for the turn signal. also for the outermost light its only got a single filament 194 bulb so you have to choose whether you want it to flash or stay on as a parking light... but other than that it was pretty easy and worth it to.
#70
Senior Member
iTrader: (12)
Re: Seqential Turn Signal, Round #4
it was the tailight wiring that was different... since theres only one brake light for the rear on the camaro, you have to make the turn signal bulb a dual filament and splice the turn signal wire which is yellow for the left and green for the right tailight, once you have that done you can splice the parking light form the brake light which is a brown wire and attach it to the extra wire coming from the dual filament that was for the turn signal. also for the outermost light its only got a single filament 194 bulb so you have to choose whether you want it to flash or stay on as a parking light... but other than that it was pretty easy and worth it to.
#71
Senior Member
iTrader: (12)
Re: Seqential Turn Signal, Round #4
it was the tailight wiring that was different... since theres only one brake light for the rear on the camaro, you have to make the turn signal bulb a dual filament and splice the turn signal wire which is yellow for the left and green for the right tailight, once you have that done you can splice the parking light form the brake light which is a brown wire and attach it to the extra wire coming from the dual filament that was for the turn signal. also for the outermost light its only got a single filament 194 bulb so you have to choose whether you want it to flash or stay on as a parking light... but other than that it was pretty easy and worth it to.
#72
Junior Member
Join Date: Feb 2008
Location: California
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 Camaro/91 Camaro
Engine: 350/3.1 v6
Transmission: M22/stock
Axle/Gears: 3.73 GM 12 Bolt/stock
Re: Seqential Turn Signal, Round #4
As for the turn signal bulb being only single filament, wouldn't you want it like that so it does not come on as a running light or a brake light to keep the camaro wiring as stock as possible? I would keep the brake lights stock, use the turn signal bulb as the 1st bulb in the sequence, the stop/tail light as the 2nd, and the running light and either running or as part of the 3rd bulb.
#73
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
We are hunting for a dual filament, 192-sized bulb (even if it requires a new socket) to wire into that lens, to avoid having to put in a whole new bulb.
If anyone finds one before us...LET US KNOW!
If anyone finds one before us...LET US KNOW!
#76
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Yep. I do have some still sitting here & ready to ship out.
$56 covers the lower 48 states shipping. Hawaii/Alaska & international shipping available, but please PM me prior to ordering for a correct shipping quote. Paypal to SteveCranford@Austin.rr.com. I prefer Paypal deposited funds, but for credit card funded Paypal transactions, include $3 to cover the Paypal charged fee.
Or PM me for a mailing address to send a M.O.
$56 covers the lower 48 states shipping. Hawaii/Alaska & international shipping available, but please PM me prior to ordering for a correct shipping quote. Paypal to SteveCranford@Austin.rr.com. I prefer Paypal deposited funds, but for credit card funded Paypal transactions, include $3 to cover the Paypal charged fee.
Or PM me for a mailing address to send a M.O.
#77
Supreme Member
Join Date: Apr 2007
Location: St. Petersburg, FL
Posts: 1,087
Likes: 0
Received 1 Like
on
1 Post
Car: 88 Camaro
Engine: 305 TBI
Transmission: 700-R4
Axle/Gears: 2.73
Re: Seqential Turn Signal, Round #4
Do these Sts support reverse light/amber light deleted and painted red. So say i got the white part painted red, and the yellow part painted red. Can i hook up the sts to ultilize the white reverse lights for the turn signal to.
my question is, can it go 4 3 2 1 or will it only go 3 2 1
my question is, can it go 4 3 2 1 or will it only go 3 2 1
Last edited by rough; 12-20-2008 at 01:17 PM.
#78
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Do these Sts support reverse light/amber light deleted and painted red. So say i got the white part painted red, and the yellow part painted red. Can i hook up the sts to ultilize the white reverse lights for the turn signal to.
my question is, can it go 4 3 2 1 or will it only go 3 2 1
my question is, can it go 4 3 2 1 or will it only go 3 2 1
Personally, I'd suggest 1/2 3 4.
I'm considering getting some red 2057 sockets & bulbs converting them to tail/bake/turns too.
#81
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Seqential Turn Signal, Round #4
So 1&2 - 3 - 4 would be fine. No other combination.
Lou
#82
Junior Member
Join Date: Jan 2008
Location: Muskego, WI
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Formula, 89 Firebird.
Engine: 355 V8, 2.8L V6
Transmission: 700r4
Axle/Gears: 3.23
Re: Seqential Turn Signal, Round #4
Hey Stephen, how many more of these do you have left? Interested in buying but it'll be a week or so till I am able.
#84
Junior Member
Join Date: May 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88' Trans-AM WS6
Engine: 305 TPI
Transmission: Auto
Re: Seqential Turn Signal, Round #4
That is awsome, Im building a LCD display cluster for my T/A this winter. This will fit nicely. Did you swap the tail lights for LED's if so where did you get em?
#88
Member
iTrader: (5)
Join Date: Aug 2007
Location: Dallas, GA
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 SC Camaro (92 Tribute)
Engine: V6
Transmission: M5
Re: Seqential Turn Signal, Round #4
Hey Stephen.
I am very interested in these for my '84 Camaro. Put my name on the list for one of the last 5 sets. I've read the previous post and this one. I'm sure that I can handle the wiring part, but now I'm a little worried after reading 831chevyman's post about the tail light wiring being different than the directions. Am I going to have a problem? Do you have updated directions? Thanks, Jamie
I am very interested in these for my '84 Camaro. Put my name on the list for one of the last 5 sets. I've read the previous post and this one. I'm sure that I can handle the wiring part, but now I'm a little worried after reading 831chevyman's post about the tail light wiring being different than the directions. Am I going to have a problem? Do you have updated directions? Thanks, Jamie
#89
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
After consulting with my Tech guy (who designed the STS), the instructions are correct & 831chevyman misunderstood the instructions somehow. He's also the only person who has said the instructions were wrong so........
There is no "list". Orders are filled & shipped as they are paid for.
There is no "list". Orders are filled & shipped as they are paid for.
Hey Stephen.
I am very interested in these for my '84 Camaro. Put my name on the list for one of the last 5 sets. I've read the previous post and this one. I'm sure that I can handle the wiring part, but now I'm a little worried after reading 831chevyman's post about the tail light wiring being different than the directions. Am I going to have a problem? Do you have updated directions? Thanks, Jamie
I am very interested in these for my '84 Camaro. Put my name on the list for one of the last 5 sets. I've read the previous post and this one. I'm sure that I can handle the wiring part, but now I'm a little worried after reading 831chevyman's post about the tail light wiring being different than the directions. Am I going to have a problem? Do you have updated directions? Thanks, Jamie
#91
Junior Member
Join Date: Jan 2008
Location: Muskego, WI
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Formula, 89 Firebird.
Engine: 355 V8, 2.8L V6
Transmission: 700r4
Axle/Gears: 3.23
Re: Seqential Turn Signal, Round #4
Hurray for payday! Just sent my payment to you Stephen.
#93
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Just 2 STS units left now. And who knows when or even IF Round 5 will happen.
#94
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
At this point....No more Paypal is accepted. They SCREWED me big time on this last STS unit.
Most likely, I will be closing my Paypal & never doing business with them ever again.
I still have the last 2 STS units sitting here, ready to ship.
Most likely, I will be closing my Paypal & never doing business with them ever again.
I still have the last 2 STS units sitting here, ready to ship.
#96
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Ummmm....As the title of this thread says...Sequential Turn Signals. My avatar is my tail lights.
My video
My video
#98
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Oh....Th charged me out the A$$ & changed my account type from Personal to Premiere, which will charge me for EVERY transaction. I'm pretty much done with them.....I've spent ALL last evening & today fighting with them over it.
This isn't the first time they raped my wallet!
This isn't the first time they raped my wallet!
#99
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Seqential Turn Signal, Round #4
Are you saying that they started charging you money WITHOUT YOUR CONSENT?!? Yeah, that sounds like GayPal, alright.
I better check my account then, don't want those a** rapists to change mine too.
Lou
I better check my account then, don't want those a** rapists to change mine too.
Lou
#100
Banned
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Seqential Turn Signal, Round #4
Sorta.....
Personal accounts are free...Premier accounts aren't.
graded me to Premier, without telling me beforehand. No warning or anything. Now they wanna charge me for EVERY transaction, credit card or not....
They up