help with window washer motor
#1
Member
Thread Starter
Join Date: Aug 2001
Location: Sydney,NSW,Australia
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
help with window washer motor
does anyone know which wire i will need to test to see if the pump is geting 12v? the washer is located on the wiper motor held by a clip thanks
#2
Member
iTrader: (1)
Join Date: Oct 2006
Location: Kansas
Posts: 473
Likes: 0
Received 1 Like
on
1 Post
Car: 82 Camaro Z28, 88 IROC-Z
Engine: 5.0L TBI., 5.7TPI
Transmission: Auto TH200C, 700R4
Axle/Gears: 3.23 posi, ones that rotate!
Re: help with window washer motor
Visit this link and take a look at the body wiring continued Figure for your model year. Then scroll down to the bottom of the page and take look at either the 84 or 86 off site wiring diagrams (these diagrams show the internal connections for the wiper and pump motors. Note that there is not a direct wire connection to the washer pump motor from any of the wires from the interior of the car).
http://www.austinthirdgen.org/index.php?pid=19
Most likely with the washer switch enabled you should see 12 volts on both the PINK and GRAY wires.
Dave
http://www.austinthirdgen.org/index.php?pid=19
Most likely with the washer switch enabled you should see 12 volts on both the PINK and GRAY wires.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM