2 1/16" (52mm) red face gauges
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Feb 2000
Location: Savannah, GA
Posts: 2,361
Likes: 0
Received 1 Like
on
1 Post
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
2 1/16" (52mm) red face gauges
I found one website that sells red face gauges (www.speedhut.com).
Is there ANY other place I can get red face 2 1/16" (52mm) gauges?
Is there ANY other place I can get red face 2 1/16" (52mm) gauges?
Last edited by John Millican; 11-18-2005 at 07:10 PM.
#2
Mr. Millican,
You could try to use any standard 2-1/16" gauge, then simply embarrass the heck out of it. Getting just the right shade of red could be a little tricky, however, so be careful about just how much shame you pour on the little instrument.
Building a custom dash, are we?
Have you looked at the "Nexus" line from Autometer? http://hp.autometer.com/products/nexus/
It's a SWF page, so it may take a moment to load the annoying visuals and audio track before you get to any real information.
Sorry, no real help here, other than a bump up.
You could try to use any standard 2-1/16" gauge, then simply embarrass the heck out of it. Getting just the right shade of red could be a little tricky, however, so be careful about just how much shame you pour on the little instrument.
Building a custom dash, are we?
Have you looked at the "Nexus" line from Autometer? http://hp.autometer.com/products/nexus/
It's a SWF page, so it may take a moment to load the annoying visuals and audio track before you get to any real information.
Sorry, no real help here, other than a bump up.
#3
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Feb 2000
Location: Savannah, GA
Posts: 2,361
Likes: 0
Received 1 Like
on
1 Post
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
Originally posted by Vader
Mr. Millican,
Building a custom dash, are we?
Mr. Millican,
Building a custom dash, are we?
Nexus are nice but overpriced. You can't just buy a gauge, you have to buy their controller too.
Thread
Thread Starter
Forum
Replies
Last Post