Accidentally cut off the wires for the reverse lights, can another one be made??!!
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: Hudson, FL USA
Posts: 818
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro(92 Z28 clone)
Engine: Forged 383, AFR 195 419/430@wheels
Transmission: Monster 700R4 Yank 3600 stall
Axle/Gears: 9in Detroit locker-3.90's,35 spline
Accidentally cut off the wires for the reverse lights, can another one be made??!!
When I was trimming the wiring harness the other day, I never thought about it at all. As I was hooking up all the stuff to the T5 I realized that I cut the damn connector off for the reverse lights, and the wiring is cut allthe way up to the brake booster. Anyway, is it possible to make a homemade fix? Or should I just go to the junkyard and find a 5 speed car and take the connector and cut the wiring out and try to resplice it back onto the harness? Thanks for any replies to this thread, Paul Moore
#2
TGO Supporter
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes
on
23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
If you still have the connector you can remove the pins from it and solder them to the existing wire. After that, push the pins back in the connector and plug it in.
PepBoys also carries a pretty large variety of OEM style connectors as well.
PepBoys also carries a pretty large variety of OEM style connectors as well.
Thread
Thread Starter
Forum
Replies
Last Post