Prom/tuning Basics
#1
TGO Supporter
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
Join Date: Dec 2001
Location: ELIZABETH,PA,USA
Posts: 2,308
Likes: 0
Received 0 Likes
on
0 Posts
Prom/tuning Basics
can somebody help me?
ive recently become involved in EFI building and am rather green at it. ive learned soo much in the last few months but want to learn much more(thanks to third gen.) i want to start burning my own chips especially cause mine from TPIS is far from optimal
but am kind of scard anyway. here are my questions:
im using an AUTO X-RAY scanner and have read TRAXIONS intro
which cleared alot of things up, but when i am tuning what should i watch for other than the obvious like timing,knock retard and o2 voltage ?. i hear alot of guys talking about block learn mode
counts - where should these be and what do they represent?
and lastly when i do start burning is there any programs that are more beginer friendly ,i am very mechanically inclined and have no problems "testing and tuning" which i know is the best tool but neeed some help getting started in the right direction.
thank you for listening ,and for any help and i understand if there are just to many questins to answer.
87 T/A MAF 355,10.6 CR,CANFIELD HEADS,ZZ9 CAM,SLP 1 3/4,
MINI-RAM,MSD 6AL,FLO-MASTER,10 BOLT 3.73's,STAGE 6.
ive recently become involved in EFI building and am rather green at it. ive learned soo much in the last few months but want to learn much more(thanks to third gen.) i want to start burning my own chips especially cause mine from TPIS is far from optimal
but am kind of scard anyway. here are my questions:
im using an AUTO X-RAY scanner and have read TRAXIONS intro
which cleared alot of things up, but when i am tuning what should i watch for other than the obvious like timing,knock retard and o2 voltage ?. i hear alot of guys talking about block learn mode
counts - where should these be and what do they represent?
and lastly when i do start burning is there any programs that are more beginer friendly ,i am very mechanically inclined and have no problems "testing and tuning" which i know is the best tool but neeed some help getting started in the right direction.
thank you for listening ,and for any help and i understand if there are just to many questins to answer.
87 T/A MAF 355,10.6 CR,CANFIELD HEADS,ZZ9 CAM,SLP 1 3/4,
MINI-RAM,MSD 6AL,FLO-MASTER,10 BOLT 3.73's,STAGE 6.
Thread
Thread Starter
Forum
Replies
Last Post