Displaying SA in PROMID Field 7747
11-15-2009, 11:55 AM
#1
Member
Thread Starter
Displaying SA in PROMID Field 7747
Well, trashed your original post. Be nice if the boards were working correctly. Anyway, what follows is what I posted as a reply to your question about placing the SA into the ALDL stream of the '7747 ECM:
Neither one is correct. I believe that this info is listed in the Come in For a Free Tune thread.
In general the SA value can be placed in a single location. So the O2 crosscounts ALDL location is good for it. Then use the PromID for the injector PW.
RBob.
Neither one is correct. I believe that this info is listed in the Come in For a Free Tune thread.
In general the SA value can be placed in a single location. So the O2 crosscounts ALDL location is good for it. Then use the PromID for the injector PW.
RBob.
Last edited by RBob; 11-16-2009 at 12:13 PM.
11-16-2009, 12:32 PM
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,432
Likes: 0
Received 225 Likes
on
211 Posts
Car: check
Engine: check
Transmission: check
Re: Displaying SA in PROMID Field 7747
Check this thread:
https://www.thirdgen.org/forums/diy-...ce-7747-a.html
For SA in place of PW use 66 and 67 in place of the AB & AC.
RBob.
https://www.thirdgen.org/forums/diy-...ce-7747-a.html
For SA in place of PW use 66 and 67 in place of the AB & AC.
RBob.
11-16-2009, 01:50 PM
#3
Member
Thread Starter
Re: Displaying SA in PROMID Field 7747
Well, trashed your original post. Be nice if the boards were working correctly. Anyway, what follows is what I posted as a reply to your question about placing the SA into the ALDL stream of the '7747 ECM:
Neither one is correct. I believe that this info is listed in the Come in For a Free Tune thread.
In general the SA value can be placed in a single location. So the O2 crosscounts ALDL location is good for it. Then use the PromID for the injector PW.
RBob.
Neither one is correct. I believe that this info is listed in the Come in For a Free Tune thread.
In general the SA value can be placed in a single location. So the O2 crosscounts ALDL location is good for it. Then use the PromID for the injector PW.
RBob.
Ok rob, i would like to use the SA value into the 02 cross counts then! i have no clue how to do that? please help me lol.. Ive been reading so much i think im getting burnt out!
so if i use this, It will display SA in the PROMID field?
$D4E7 $00
$D4E8 $66
$D4E9 $00
$D4EA $67
What do i do differently for putting it into 02 cross counts?
11-16-2009, 08:36 PM
#5
Member
Thread Starter
Re: Displaying SA in PROMID Field 7747
Thanks again rob. thats the thread ive been reading (3 times) and ive read every artical under (the prom tuning guide). oh ive read the come in for free tune almost 3 times. all of this in about 2 weeks.. lol .. i even read all the old Diy-efi articales. Yet i still cant figure that out! but im going to take it a little slower. i dont need that yet. My first real tune tonight went great! i picked up lots of power, and just the sound of the moter. is so much better. and the wide band does wonders. thanks for the reply anyhow it will dawn on me at some point!!! have a great day!
Jeff
Jeff
11-16-2009, 09:30 PM
#6
Member
Thread Starter
Re: Displaying SA in PROMID Field 7747
rob i got it!!! i feel dumb now
Thread
Thread Starter
Forum
Replies
Last Post
