problems getting datalog
#1
Member
Thread Starter
Join Date: Nov 2003
Location: Elkhart, IN, USA
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Car: 77 K20 80 K2500 93 C2500 94 K1500
Engine: 350 350 454 350
Transmission: 350 465 80E 60E
Axle/Gears: 4.10 3.73 5.13 3.73
problems getting datalog
i'm having probelms getting a datalog using TunerproRT.
i've got a 1994 Chevy K1500 w/7427 PCM. connected to my laptop with a Moates Xtreme ALDL, running TunerproRT.
i can get it to connect, and get it to display the ALDL values. i'll tell it to record, and it seems to work... until i go to export the log to CSV. what i end up with is a spreadsheet that says "exporting sample XX" (xx= a number) in every box on the spreadsheet.
anybody know what i'm doing wrong?
i'm running the proper BJLH bin, an $0d.ads, and xdf.
hopefully you guys can help me figure this out. i'm about ready to strap my laptop to the grille of the truck and run the whole mess into a brick wall.
i've got a 1994 Chevy K1500 w/7427 PCM. connected to my laptop with a Moates Xtreme ALDL, running TunerproRT.
i can get it to connect, and get it to display the ALDL values. i'll tell it to record, and it seems to work... until i go to export the log to CSV. what i end up with is a spreadsheet that says "exporting sample XX" (xx= a number) in every box on the spreadsheet.
anybody know what i'm doing wrong?
i'm running the proper BJLH bin, an $0d.ads, and xdf.
hopefully you guys can help me figure this out. i'm about ready to strap my laptop to the grille of the truck and run the whole mess into a brick wall.
#3
Re: problems getting datalog
I won't be able to help you out as I have not received everything I need just yet. I have the exact same bin and .xdf as you. However, I have not been able to find the $0D.ads file on moates. Where did you come across yours? As soon as I can find that file and I have everything I will see if I can get mine to work. The only difference is I will not be using moates xtreme aldl. So please, if you can tell me where you got your .ads file, I will try to help you out once I have everything. That is considering it works for me though.
Thread
Thread Starter
Forum
Replies
Last Post
Glowsock
Tech / General Engine
1
09-06-2015 06:40 AM