PROMinator problems - verify error
#1
PROMinator problems - verify error
Hey all!,
I am at the stage where I need to burn a BIN onto my truck's (1227749 - GMC Typhoon ) ECM and am using a PROMinator PRO.
I have connected it to the ECM and also the little blue LED programme selector and my comp detects it fine. (LPT1 port 378d)
I can't for some reason seem to burn the BIN onto the PROMinator though.
I get the following error:
Verify failed at:
Address 0x00
ROM: 0x10
FILE: 0x01
Address 0x01
ROM: 0xB6
FILE: 0x42
Address 0x01
ROM: 0x40
FILE: 0x42
Address 0x01
ROM: 0x04
FILE: 0x42
Address: 0x01
ROM: 0x01
FILE: 0x42
Address: 0x01
ROM: 0x01
FILE: 0x42
Address: 0x01
ROM: 0x27
FILE: 0x42
Address: 0x01
ROM: 0x32
FILE: 0x42
Address: 0x01
ROM: 0xCE
FILE: 0x42
Address: 0x01
ROM: 0x00
FILE: 0x42
I tried burning to programme 0 and 1 with the selector, with the switch on the selector in both positions. I get the same error for all variations. I'll post this on code59.org as well and see if someone can identify what's wrong. The BIN file I am using is Dig's 60lb BIN from that site.
I also tried Tuner Pro and enabled the PROMinator support but still no dice.
I'm going to try a 16k BIN and see if that works but right now I'm stumped. Are there any other test measures I can use?
Any help would be gratefully appreciated! Thanks!
Please PM me or e-mail mf_edwards@yahoo.comThis e-mail address is being protected from spam bots, you need JavaScript enabled to view it .
I am at the stage where I need to burn a BIN onto my truck's (1227749 - GMC Typhoon ) ECM and am using a PROMinator PRO.
I have connected it to the ECM and also the little blue LED programme selector and my comp detects it fine. (LPT1 port 378d)
I can't for some reason seem to burn the BIN onto the PROMinator though.
I get the following error:
Verify failed at:
Address 0x00
ROM: 0x10
FILE: 0x01
Address 0x01
ROM: 0xB6
FILE: 0x42
Address 0x01
ROM: 0x40
FILE: 0x42
Address 0x01
ROM: 0x04
FILE: 0x42
Address: 0x01
ROM: 0x01
FILE: 0x42
Address: 0x01
ROM: 0x01
FILE: 0x42
Address: 0x01
ROM: 0x27
FILE: 0x42
Address: 0x01
ROM: 0x32
FILE: 0x42
Address: 0x01
ROM: 0xCE
FILE: 0x42
Address: 0x01
ROM: 0x00
FILE: 0x42
I tried burning to programme 0 and 1 with the selector, with the switch on the selector in both positions. I get the same error for all variations. I'll post this on code59.org as well and see if someone can identify what's wrong. The BIN file I am using is Dig's 60lb BIN from that site.
I also tried Tuner Pro and enabled the PROMinator support but still no dice.
I'm going to try a 16k BIN and see if that works but right now I'm stumped. Are there any other test measures I can use?
Any help would be gratefully appreciated! Thanks!
Please PM me or e-mail mf_edwards@yahoo.comThis e-mail address is being protected from spam bots, you need JavaScript enabled to view it .
Thread
Thread Starter
Forum
Replies
Last Post