decel enleanment table question
#1
Member
Thread Starter
Join Date: Feb 2001
Location: canada
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
decel enleanment table question
I have a table which is “decel enleanment coolant factor vs coolant, which looks like this:
Deg c factor
-40 3.0
-16 3.0
8 3.0
32 3.0
56 2.8
80 2.0
104 1.75
also have a constant table, “decel enleanment deta map factor”, which is presently set at 0.750.
the constant can be move between 0 to 1.
What way should the table and constant be move to lean out decel? I have tried moving both lower but with no success.
Deg c factor
-40 3.0
-16 3.0
8 3.0
32 3.0
56 2.8
80 2.0
104 1.75
also have a constant table, “decel enleanment deta map factor”, which is presently set at 0.750.
the constant can be move between 0 to 1.
What way should the table and constant be move to lean out decel? I have tried moving both lower but with no success.
Thread
Thread Starter
Forum
Replies
Last Post
355tpipickup
Alternative Port EFI Intakes
3
08-29-2015 10:47 PM