Anyone get a response from JERRYWHO?
#1
Junior Member
Thread Starter
Join Date: Sep 2001
Location: Woodlands, Texas, USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Anyone get a response from JERRYWHO?
In https://www.thirdgen.org/messgboard/...ML/001981.html JERRYWHO mentioned that he found a Memcal adaptor for $9.00 and ordered some. Anyone find out who his source was?
I fiddled with my new memcal last night and found it was almost impossible to solder a zif socket in it. I'd love to get a couple of the Jet type memcal adaptors.
Thanks
I fiddled with my new memcal last night and found it was almost impossible to solder a zif socket in it. I'd love to get a couple of the Jet type memcal adaptors.
Thanks
#2
Supreme Member
Sorry for no response, I've been working very hard lately..... I got the five adaptors that I ordered and believe it or not, I got them from Summit Racing. Summit has all ADS chips in their clearance section. To find them at Summit Racing go to clearance and then ignition and modules and then chips. This will get you to the list of ADS chips they still have in stock. The five I ordered were all TPI speed density years. Three of them were adaptor style and the other two were factory Memcals that were reprogrammed by ADS. So be careful what you order and I hope this helps.
#3
Junior Member
Thread Starter
Join Date: Sep 2001
Location: Woodlands, Texas, USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Great! Thanks for the information. I ordered a couple of them for my truck.
There are some slim pickings there for 3rd gens though.
[This message has been edited by davidjon_99 (edited September 21, 2001).]
There are some slim pickings there for 3rd gens though.
[This message has been edited by davidjon_99 (edited September 21, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post