another Prominator group buy?
#1
another Prominator group buy?
That worked pretty well last time...and we have a handful in stock that won't take long to ship, and I have the time (for now LOL)...
I'll take up to 10 orders between now and this Sunday (the 20th) and give $50 off a Pro version or $25 off a Standard version, and have them shipped before the end of the month when I'm taking a lil "vacation" to caravan out to Bowling Green for the CAC Cruisefest.
If interested, SPEEDTRONICS to submit an order form and enter "group buy" in the comments.
Any questions email me at bill@speedtronics.net.
Happy Tuning!
Bill
I'll take up to 10 orders between now and this Sunday (the 20th) and give $50 off a Pro version or $25 off a Standard version, and have them shipped before the end of the month when I'm taking a lil "vacation" to caravan out to Bowling Green for the CAC Cruisefest.
If interested, SPEEDTRONICS to submit an order form and enter "group buy" in the comments.
Any questions email me at bill@speedtronics.net.
Happy Tuning!
Bill
#4
Welllll crapola...it looks like I'm gonna have to rebuild this server. The Speedtronics site will be down for a while.
Please email me directly at bill@speedtronics.net if:
- you have already submitted an order form and have not received a confirmation email from me
- you have used the speedtronics.net contact form and have not received a reply
- you want to order a Prominator but haven't submitted an order via the speedtronics.net site.
- you have emailed me directly for any other reason and have not received a reply
Or of course for any other questions...etc.
This won't effect being able to build and ship Prominators...just the web site.
Bill
Please email me directly at bill@speedtronics.net if:
- you have already submitted an order form and have not received a confirmation email from me
- you have used the speedtronics.net contact form and have not received a reply
- you want to order a Prominator but haven't submitted an order via the speedtronics.net site.
- you have emailed me directly for any other reason and have not received a reply
Or of course for any other questions...etc.
This won't effect being able to build and ship Prominators...just the web site.
Bill
Last edited by MrBill; 05-23-2006 at 07:07 AM.
#5
Senior Member
Joined: Feb 2005
Posts: 617
Likes: 0
From: Rochester,NY
Car: 1993 Caprice wagon "Shammoo"
Engine: tpi'd 406, with P4 ebl EBL 730 ECM
Transmission: custom "4L65" swap.
Axle/Gears: 3.42:1 with posi
I want to thank Mr BIll publicly for allowing me the courtesy of the Group purchase pricing. I had just ordered mine before the notice came out and Bill, being the gentleman that he is agreed to honor the group pricing.
Thank You Bill!
Dave Buchholz Rochester, NY
Thank You Bill!
Dave Buchholz Rochester, NY
#7
The website is back up and running SPEEDTRONICS
(talk about bad timing! )
Anyway...still have a handful left ready to ship right away...get 'em while they're hot!
(talk about bad timing! )
Anyway...still have a handful left ready to ship right away...get 'em while they're hot!
Trending Topics
#8
Senior Member
Joined: Feb 2005
Posts: 617
Likes: 0
From: Rochester,NY
Car: 1993 Caprice wagon "Shammoo"
Engine: tpi'd 406, with P4 ebl EBL 730 ECM
Transmission: custom "4L65" swap.
Axle/Gears: 3.42:1 with posi
I received my prominator today. I wish I could figure out which end is forward. I I ' working with a "344 ECM" (same as "730") using the Moates adapter. I was looking for some installed photos but didn't spot any here. The adapter board is not marked for pin #1 orientation, nor is the prominator board that I can find. It also looks like I need to cut some metall away from the ecm cover. Anyone got an "installed" photo or tell tell me which end is is Pin #1?
Bill, how 'bout at least throwing in a set of mounting instructions when you ship it!
Bill, how 'bout at least throwing in a set of mounting instructions when you ship it!
Last edited by lakeffect2; 05-27-2006 at 09:24 PM.
#9
You don't need any other adapters, the assembly plugs in as-is, and will only fit one way. It should look something like this (it is not necessary to completely remove the top half of the ECM housing):
Yes you will need to trim out a "slot" for access to the connector(s) on the Prominator.
Yes you will need to trim out a "slot" for access to the connector(s) on the Prominator.
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
05-28-2019 01:47 PM
TinnMann2
Canadian Region
16
06-18-2017 05:10 PM