Bin Questions - Need Help Please
#1
Member
Thread Starter
Join Date: Feb 2006
Location: Monroe, NY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Corvette
Engine: 383 ci
Transmission: ZF 6 Speed
Axle/Gears: 4.10 Dana 44
Bin Questions - Need Help Please
I have a 1987 corvette (165 ECM using MAF), AutoProm and TunerProRT. The car originally had the manual 4+3 transmission, but I replaced that with a ZF 6 speed. Engine is now a Mini Ram 383, AFR 195 heads, 240/240 cam.
Anyway, the broadcast code for the stock bin is ABTC ($32B), but I can't seem to find it (to download) anywhere online.
My first question is - does anyone know of another broadcast code that would work just as well for this car (using $32B)?
Or, my second question - It seems that many have converted to $6E mask with good results. Should I just convert to $6E? If so, what broadcast code should I use? APYP is for a 1989 manual vette - would it be ok? Is there anything else involved in the conversion, other than editing a chip using the $6E definition file and $6E bin?
Thank you very much!
Dan
Anyway, the broadcast code for the stock bin is ABTC ($32B), but I can't seem to find it (to download) anywhere online.
My first question is - does anyone know of another broadcast code that would work just as well for this car (using $32B)?
Or, my second question - It seems that many have converted to $6E mask with good results. Should I just convert to $6E? If so, what broadcast code should I use? APYP is for a 1989 manual vette - would it be ok? Is there anything else involved in the conversion, other than editing a chip using the $6E definition file and $6E bin?
Thank you very much!
Dan
Last edited by 87 Vette Owner; 04-14-2006 at 04:58 PM.
#3
Member
Thread Starter
Join Date: Feb 2006
Location: Monroe, NY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Corvette
Engine: 383 ci
Transmission: ZF 6 Speed
Axle/Gears: 4.10 Dana 44
Thanks for finding that! I opened it up in TunerPro and browsed through most of the variables - it looks good.
So should I even bother with a $6E bin, or just use the ABTC?
So should I even bother with a $6E bin, or just use the ABTC?
#5
Member
Thread Starter
Join Date: Feb 2006
Location: Monroe, NY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Corvette
Engine: 383 ci
Transmission: ZF 6 Speed
Axle/Gears: 4.10 Dana 44
It is definitely a long, long road .
I guess I'll start out with the ABTC bin and go from there. A comparison is a good idea - I'll give that a shot in TunerPro.
Thanks and good luck!
Dan
I guess I'll start out with the ABTC bin and go from there. A comparison is a good idea - I'll give that a shot in TunerPro.
Thanks and good luck!
Dan
Thread
Thread Starter
Forum
Replies
Last Post