What build #? What OS? What (etc)?

 

sorry magnus, os is winxp, build is the latest, d/led it a few days ago, 7 or 8 days. Using the usb autoprom.

 

Does it happen when you first add the table, or when you enter info? I can't get it to crash, but that certainly doesn't mean there isn't an issue. Are there specific instructions you could provide to make this happen?

 

Is anyone else having any issues on startup where the ALDL dash either doesn't fully paint, or comes up totally gray. Have to increase it's height to be able to view the fields. And it still flickers on and off while resizing - have to stop the growing part while everything is visible or you have to do it until it does.

This is on a Dell Latitude D600 laptop using the built in screen at a 1400x1050 resolution and using 32 bit color settings. I'm running XP Profession version 2002 SP2, 1.4GHz processor, 512MB memory.

 

Maybe support for big Bins as well??
Adrian

 

Try running a standard resolution like 1280x1024 and see if that helps.

 

I believe that is a typical resolution for that screen. Laptops are often different in "native" resolution from desktops.

 

I'll try a lower resolution this evening, but that is "the standard resolution" on this laptop (which is a year old). It does not cause a problem for TunerCat or Datamaster.

Hadn't thought to try a lower resolution to see if that made a difference....

 

It already supports unlimited bin size for editing. If you're talking about large bin support for the Ostrich, yes, that's coming.

 

Hmm.. again this sounds like a graphics card that doesn't support bitblt. The next release will have a check you can run to see if that's the issue. This one is a bit unusual because it sounds like it's a newer computer.

If it is the issue, the lower resolution will not help unfortunately.

Do the graphs show up correctly?

 

I'll have to check tonight. It works fine with the laptop in the docking station and displaying on my 19" Dell Trinitron monitor, it's only the laptop screen that sees the problem. I'll get back to ya. And I am running the latest TP-RT version as of the time I checked yesterday morning.

 

Thanks Mangus!

 

Any ford support yet?

 

http://www.moates.net/fileman/index....es/2%29%20Ford

Mainly just EEC-IV for now. Starter binaries are included there.

 

Guess I have to wait a little longer.. I'd like to be able to use tunerpro to do some realtime tuning on the cobra (2001). Right now we're running a hair-too-rich diablosport/vortech tune.

-- Joe

 

I've got an SHO bin to add to that. I think it's x2j or something on that order. I did some hacking of it and got a bunch of the constants down. Even found the MAF tables. Nothing for ignition though .

 

Mine does that too, and its an old POS Compaq Pentium-233 with Win98 original version and 96 megs ram running 800x600 resolution.