clear flood logic
#1
Member
Thread Starter
Join Date: Jul 2005
Location: CNY
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 355 Vortec TBI
Transmission: T56
clear flood logic
Can anyone tell me how the clear flood logic works in the 8746? I'm curious as to what the general operation, triggers, filters, timers, etc.
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,432
Likes: 0
Received 225 Likes
on
211 Posts
Car: check
Engine: check
Transmission: check
Nothing fancy, while the engine is not running if the TPS% exceeds a calibration term the desired AFR is set toa lean value (another cal term).
In ANLU the TPS% threshold is 80% and the desired AFR is 20:1. So, while cranking, if the TPS is >= 80% then the AFR is set to 20:1.
RBob.
In ANLU the TPS% threshold is 80% and the desired AFR is 20:1. So, while cranking, if the TPS is >= 80% then the AFR is set to 20:1.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post