Pablo

iTrader: (1)

is there a commented hack anywhere for this thing? Ive searched hi and low and only found an un commented version.

I just need the malf. flag locations really... the ecu file i have doesnt have them in there for some reason

3.8TransAM

Check at www.gnttype.org and maybe www.turbobuick.com

Only ones I can think of,

later
Jeremy

Pablo

iTrader: (1)

gnttype has been down for awhile

and I searched tb.com... im still looking though

Grumpy

* GENERAL PARAMETERS FOR DIAGNOSTICS
3275 FF KKMASK1 FCB $FF''MASK FOR MALFFLG1;
;BIT=0 DISABLES MALF RECOGNITION
*EQU N=E
* BIT 0 = MALF CODE 24 VEHICLE SPEED SENSOR
* BIT 1 = MALF CODE 23 AIR TEMP SENSOR LOW
* BIT 2 = MALF CODE 22 THROTTLE POSITION SENSOR LOW
* BIT 3 = MALF CODE 21 THROTTLE POSITION SENSOR HIGH
* BIT 4 = MALF CODE 15 COOLANT SENSOR LOW TEMP
* BIT 5 = MALF CODE 14 COOLANT SENSOR HIGH TEMPERATURE
* BIT 6 = MALF CODE 13 OXYGEN SENSOR
* BIT 7 = MALF CODE 12 NO REFERENCE PULSES
*
3276 B9 KKMASK2 FCB $B9 ' 'MASK FOR MALFFLG2'
*EQU N=E
* BIT 0 = MALF CODE 42 EST MONITOR ERROR
* BIT 1 = MALF CODE 41 CAM SENSOR FAILURE
* BIT 2 = MALF CODE 35
* BIT 3 = MALF CODE 34 MAF SENSOR LOW
* BIT 4 = MALF CODE 33 MAF SENSOR HIGH
* BIT 5 = MALF CODE 32 EGR
* BIT 6 = MALF CODE 31 WASTEGATE PULSES NOT DETECTED
* BIT 7 = MALF CODE 25 AIR TEMP SENSOR HIGH
*
3277 F9 KKMASK3 FCB $F9 ' 'MASK FOR MALFFLG3'
*EQU N=E
* BIT 0 = MALF CODE 55 ADU ERROR
* BIT 1 = MALF CODE 54
* BIT 2 = MALF CODE 53 WATER INJECTION FAILURE
* BIT 3 = MALF CODE 52 CAL PACK MISSING
* BIT 4 = MALF CODE 51 PROM ERROR
* BIT 5 = MALF CODE 45 OXYGEN SENSOR RICH
* BIT 6 = MALF CODE 44 OXYGEN SENSOR LEAN
* BIT 7 = MALF CODE 43 ESC FAILURE

Pablo

iTrader: (1)

Thanks