Epromer 5 users please check in....
#1
Member
Thread Starter
Join Date: May 2003
Location: Lakeland,Florida
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Epromer 5 users please check in....
I have a question for epromer 5 users- Is anyone able to program a 29F040 chip??
I can read them, and blank check them but not program them at all. I have no probs with programming 27C256's, its just the 29F040's that are giving me trouble. I have tried three different 29F040's, all brand new from Craig Moates (thanks to Craig for helping me out!).
I can read them, and blank check them but not program them at all. I have no probs with programming 27C256's, its just the 29F040's that are giving me trouble. I have tried three different 29F040's, all brand new from Craig Moates (thanks to Craig for helping me out!).
#3
Member
Thread Starter
Join Date: May 2003
Location: Lakeland,Florida
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I have, and the crew at USTR is finally starting to help me out. They think they found the problem- and told me to solder in a capacitor as well as sent me two new beta software versions 6af and 6ag to try. The standard version 6 doesnt support flash units.. Neither of the new software they sent is available on their site yet. I am MUCH happier knowing they are trying to fix this for me.
#4
Member
Thread Starter
Join Date: May 2003
Location: Lakeland,Florida
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
For anyone interested- The problem is solved! The USTR.net folks came through. I had to solder in an extra .0047 uf capacitor and they sent me even MORE new software that isnt yet available - but They did help and it works great!
Thread
Thread Starter
Forum
Replies
Last Post
PATRIOTIC1911
Northern Great Plains and Rocky Mountain
5
10-07-2022 10:38 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
01-28-2016 09:58 PM