What brand of prom is this?
05-17-2003, 07:46 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2000
Location: Framingham, MA 01702
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
What brand of prom is this?
I have a 27c128 type of prom. The number that are one the prom are
980
1606 9300
BLDP9252 2119
I have tried a few c7c128 but it has burned properly. My burner does not have an auto configuire feature.
It is a GM memcal. Their are no manufacturers symbols.
If someone could help decifer this or point me in a direction it would be very helpful. I have a custom program that I want to put on the factory prom, (I have a craig moates adapter, but I want to start using that on another vehicle.)
980
1606 9300
BLDP9252 2119
I have tried a few c7c128 but it has burned properly. My burner does not have an auto configuire feature.
It is a GM memcal. Their are no manufacturers symbols.
If someone could help decifer this or point me in a direction it would be very helpful. I have a custom program that I want to put on the factory prom, (I have a craig moates adapter, but I want to start using that on another vehicle.)
Last edited by dgoodhue; 05-18-2003 at 06:51 AM.
05-20-2003, 07:43 AM
#2
Member
Join Date: Jan 2003
Location: Sydney
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
I've had a successful burn on a GM Oz 27c128 EPROM with:
Vpp = 12.5 V
Vc = 5v
20 msec write pulse, 0 pulse per byte and final pulses (this makes sense on my programmer, I don't know about yours), and EPROM multipulse mode.
I've also burnt others out trying
John
Vpp = 12.5 V
Vc = 5v
20 msec write pulse, 0 pulse per byte and final pulses (this makes sense on my programmer, I don't know about yours), and EPROM multipulse mode.
I've also burnt others out trying
John
Thread
Thread Starter
Forum
Replies
Last Post
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
09-25-2015 03:51 PM
