C. Moates TBI Switcher Windows software
06-17-2002, 12:46 PM
#1
Member
Thread Starter
Join Date: Feb 2002
Location: Hastings, MN
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
C. Moates TBI Switcher Windows software
Ok Craig, your Switcher is great but it neded a little support.
Sooo here it is.
Windows software to compile the 8 switchable bins.
It does not do much error checking but I think it works. If anyone has problems with it let me know.
www.cdsounz.com/BinComp.zip
Marlon
Sooo here it is.
Windows software to compile the 8 switchable bins.
It does not do much error checking but I think it works. If anyone has problems with it let me know.
www.cdsounz.com/BinComp.zip
Marlon
07-19-2002, 11:03 PM
#4
Supreme Member
Join Date: Jul 1999
Location: Baton Rouge, LA, USA
Posts: 1,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
You think you could continue efforts on this little program? The new switcher BEGS for this kind of application!
So there would be at least 3 modes:
8x4k on a 29C256
16x32k on a 29C040
32x16k on a 29C040
Then there's 2x16k on a 29C256
Man, if it could save configurations, this little program would rule!
Of course, your cup of time is running over I'm sure...
So there would be at least 3 modes:
8x4k on a 29C256
16x32k on a 29C040
32x16k on a 29C040
Then there's 2x16k on a 29C256
Man, if it could save configurations, this little program would rule!
Of course, your cup of time is running over I'm sure...
07-25-2002, 09:53 PM
#6
Member
Thread Starter
Join Date: Feb 2002
Location: Hastings, MN
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
WOW! I had not read this for a while I guess, I have been busy building a new barn to keep my junk in.
Craig, I gotta get with you and see what exactly the happening is with the other formats. I don't have anythinhg to try them out on though....
let me know the specs.
Scott92_RS doesn't like my graphics and I am having troubles with the drag and drop you wanted but geee, how hard can it be?
Marlon
Craig, I gotta get with you and see what exactly the happening is with the other formats. I don't have anythinhg to try them out on though....
let me know the specs.
Scott92_RS doesn't like my graphics and I am having troubles with the drag and drop you wanted but geee, how hard can it be?
Marlon
07-26-2002, 06:33 AM
#7
Supreme Member
Join Date: Jul 1999
Location: Baton Rouge, LA, USA
Posts: 1,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
Marlon,
I'll keep you cc'd on the work Scott has been doing. Looks like he's about got it ready.
-Craig
I'll keep you cc'd on the work Scott has been doing. Looks like he's about got it ready.
-Craig
Thread
Thread Starter
Forum
Replies
Last Post
