91L98ragtop

Just wondering if anyone has installed the Hawks convertible light bar on their car, and if you have any pics or comments about it. I want to make sure it's ok before I order one.
Thanks!

serpentineocean

Hmm.. looks kinda crappy to me...

But what's it's use? Asthetics? or are there actual lights on it (beside the brake light)....

91L98ragtop

I know too bad it's only cosmetic, but I personally like the look. Just wanted to see if anyone has installed one, and if they had any comments, or pics.

Thanks!

91Z28

Id like to buy one, even for asthetics, but there's no way im paying what hawks wants for somthing thats not functional, 500 bucks for plastic is just insane....

bcrahl

I have one on my 91 ta and it is great and really does light up. ALso not plastic it is leather over metal. The look is awesome. go to car pictures and photos at CarDomain.com
and you can see mine in the pics in the updates.

jagevileye21

iTrader: (3)

That light bars looks A-1 on the bird. I just wanted to know if you can put the top up with no problems? How easy is it to install?

Thanks,
Jay

91L98ragtop

Awesome car. They did a great job on it. Now I'm definately getting one. Thanks!

91Z28

Even though, can you justify the price? i mean 500 bucks is still pretty steep, but i am glad it's metal not plastic. How thick is the metal, is it wobbly ? How does it attach?, i have yet to see any closeups of the mounting points.....

WillSpeedy

Also that Bird makes me wet.

krs-1

i just bought mine last sept.05 and had it installed by my body shop, it is one of the best aftermarket options to dress up the car, and the third brake lights up the whole rear of the car and sits under the top invisible till you drop the top, go to my car club site. north star camaro club of minnesota look for chris williams pics

fbodfreek

I agree with everyone, this is a great product for the 'birds. The bar is very proportional with lines from the nose of the car. I'm not sure if it would look as good on the camaros

camarorsssss

iTrader: (2)

I purchased the Light bar when Hawks first came out with them and installed it on my camaro. Yeah the price is a little high but i think it is worth it and it makes it very unique because there arent many out there. It took me about 4 hours to install it, it wasnt difficult and the instructions were very easy to follow and like the other people said, it is not plastic its metal wrapped in leather and it gets bolted to the body of the car so it isnt at all flimsey when installed.

jetblast

iTrader: (1)

Can you post some pictures of the bar on your camaro?

camarorsssss

iTrader: (2)

file://027_0A
----------
disregard that attachment, its not going to open. im working on getting some better pictures of the light bar for you

camarorsssss

iTrader: (2)

[img]C:\Documents and Settings\BEAU\My Documents\My Pictures\Kodak Pictures\2006-09-04\027_0A.JPG[img]

Iroctopless

Images must have a web link (url address) to be displayed. In otherwords, pics need to be uploaded to another website (like an online file/pic storage site), and then linked too. Then they will be displayed here.
Files stored on our personal hard drives do not have url addresses (thank goodness )!

I've seen some people install the light bar and then add a mesh screen to the inside of it (or a clear piece of Lexan). This almost totally stops the wind that seems to blow forward into the cab (makes your hair fly at the windshield even though you're sitting behind it!!!). The ride is very calm and quiet. Quite amazing actually!

krs-1

i bought one, it's LEATHER for all those concerned and has a 12 in led light in back bright red, go to the northstar camaro club of minnesota, to members chris l williams to see mine, i think you will be impressed, they put pride in their work

JMR

is hawks the only distributor of the light bar or are there others ?

quickkris2006

iTrader: (2)

Crouchman

iTrader: (1)

anyone watch "Muscle Car" on powerblock TV? They have one on the bird they're fixing up for Year One.

quickkris2006

iTrader: (2)

thats because yearone can afford anything they want to put on a car.... wish i was that lucky

JMR

actually the guys at musclecar built it but don’t have the time or patience to build one so are there any inexpensive once out here??

ken0hki

does anyone know where i can find a convertible light bar for my 88 camaro convertible?

Iroctopless

This is the only place I know of . . . http://www.hawksthirdgenparts.com/se...se&category=76 . . . as mentioned a few times above. However, it looks like they are out of stock. Might need to give them a call and find out when/if they are available again.

ken0hki

I already e-mailed them. They don't make it anymore. And all i can find around the net are ones for 4th Gens.

ken0hki

Does anyone know the measurements for the inside of a 4th Gen convertible compared to a 3rd gen? I want to know if a 4th Gen light bar could be modified to fit a 3rd Gen?

The Project

iTrader: (6)

Interested in this question as well.

Can a 4th gen bar fit or be made to fit?

lonsal

iTrader: (2)

A customer called me today about the light bar seeking my help in finding it. Both Hawks Thirdgen and F-Body Motorsports had one of their design at the G8 show I attended in Atlanta GA roughly 6 ys ago. Bruce Hawkins called me later this afternoon and I asked if they were still available. I was told it is no longer a stock item, but they can build it to order if you want it. Of course the price would be higher than if they were built as a lot batch.

Lon

ken0hki

any idea what the price would be?

lonsal

iTrader: (2)

That would be a question to ask of Hawks Thirdgen.

Lon

1992rsvertny

If you find out .lets get a group buy!!!

91z28KOSITA

@1992rsvertny, depending on the price, i might jump in. and have a friend who might join us too... please give us a heeads up on the price. thanks..

90-irocdx3

iTrader: (4)

I would be in if you can find them for a group buy.

tealcamaromanrs

i would also be interested in the group purchase

DROP_TOP_RS

I want one,price dependent!!!!!

tealcamaromanrs

Do we have any info??

twizted92

Very interested, I'm in on the buy

iansane

iTrader: (1)

I thought the thirdgen Hawks version WAS a modified 4thgen lightbar?

Iroctopless

Since this thread won't die, I figured after 5 years I'd finally throw some pics up . . .



This car is currently for sale . . .
http://www.autotrader.com/fyc/vdp.js...r_id=287730847

1320B4U

Man, i haven't posted here in awhile but this thread sparked an interest. I run the hawks lightbar and love it..too bad its a discontinued item but its the same as the 4th gen one..mounting tabs are probably a bit different though...not sure if another manufacturer makes them too. Up/down on top is fine, third brake ligt easy to wire in w/enough wire run...awesome item that i think makes the car. gt500 wouldn't look as good w/o that rollbar back in the day and the same can be said about this piece imo.

sid rs91

So that bar is actually for a 4th gen car?
any idea on how it was modified to fit?

1320B4U

^ I do believe it was manufactured by hawks for both the 3/4th gens. I've seen the exact 1 as mine on a 4th gen. If there is any change whatsoever, it would be do the mounting tabs that affix to the seatbelt bolts on either side of the sailpanels. Personally, i think it would fit w/o any modifications as both generations were very similiar in width and this piece has some flexibility to the mounting tabs to acct for this.

Mirror Image

iTrader: (2)

I made mine it is a real roll bar it is welded in to the frame rail and is a 4 point it cost me 21.00 bucks to make if you dont have a bender to bend the pipe you can go to a fab shop and they will bend it for you

iansane

iTrader: (1)

Sounds cool. How did you attach a brake light to it? Does your light illuminate when the top is up or is there some switch that turns it off? How are the wires routed? Pictures?

ken0hki

i got tired of not being able to find a light bar for my car. so i finally made one of my own its amazing what you can do with trip to the local hardware store and some stainless pipe. took me about two hours to build. pretty sturdy too!

Kraz-z

can you post the pics how you attached it to the car

ken0hki

sure. the mounting was pretty simple. its only for looks, so i wasnt really worried about strength on the mounting points. i pulled the side panels out and used a nut and bolt, and a large washer about the size of a golf ball so it would not pull through the plastic. the same is done for the back part as well. later on, i plan on welding some metal brackets inside for more stability. the bottom is currently just sitting on the carpet, i plan on welding in some brackets later for it to bolt to. even without metal brackets, the thing doesnt move at all. its strong enough for me to sit on, and i weigh about 200 lbs.

because i went all the way out to the sides, there is enough clearance for both the front and back seats to lay down all the way.

ken0hki

the roof clearance is pretty good too. its less than an inch to the top, but doesnt touch at all.

ken0hki

by the way everyone, this is just a prototype. now that i have the measurements i need, i plan on remaking the main bar as one solid piece to make it even stronger. i will have it done with a pipe bender, so the corners will be more rounded and solid.

here are some more photos

GMZombie

heh just noticed the gtamaro. it confused me for a minute that you had pontiac covers on the corners..