1989 Camaro Convertible! I found one in the junkyard and they wont sell it to me. But I can cut the back half off if I wanted to. This would yield a complete convertible setup. I dont know if it is worth it to pull. Would anyone be interested if I did? Let me know before it goes to someone else.

 

I dont need it persay, but could you get me some parts perhaps ?

 

I already pulled the trunk hatch, the convertible top and the folding decklid. Also some of the interior stuff as well.

 

i need that switch that pops the selenoids for the top cover. The tab that holds mine in is busted.

 

Firehawk SS - YGPM

 

I need the cotter pin for the locking toneau setup if you have that ?

 

why wouldn't they sell it to you?

 

They wouldnt sell it to me because they are a bunch of ...
As for the cotter pin its been torn out and the switch for the solenoids is busted as well

 

You can't buy it and roll it away but you can part it out for them?



Here's what I need:

1.) Driver's side, T-Top style visor - Black.

2.) Tan/Doeskin seat belt replacements

3.) Passenger's side door pocket/cupholder - tan/brown.

4.) Interior fascia under visors.

5.) Used but in good condition rear brake proportioning valve (drum-to-disk conversion)

See any of that stuff?

 

if the plastic interior peice that goes around behind the windshield, which the sunvisors bolt onto, if that peice is not cracked i'll take it. i also need some sunvisors if they are black

 

None of those parts. Its a gray interior and the engine and tranny and differential are all gone. All related parts are gone with those accesories. I checked today. They stripped it pretty good over the weekend.

 

Yea the black plastic piece is still good. I'll try and pull it tommorrow. Hope I dont break it. It seems like it is riveted on or something.

 

yea pull that off for me i got dibs on that. and i'm assuming the sun visors are black too right? if you wouldn't mind taking pics of them, i'll take those as well as long as they fabric isn't worn out too badly

 

Pardon me?

Looks like we have a bidding war. You wanna start?

 

LOL! Yea Cadillac does have first chance at the plastic windshield fascia. If you guys want to have a bidding war thats fine with me too.

 

didn't see that caddy...but sure i'm in


$20+shipping

 

It's all good. You can have the fascia and I'll take the a driver's side (black visor) if it exists.

15+shipping?

Can't everyone be happy?

 

sure, if that's ok with you

i thought you needed the passenger side visor tho?

 

Driver's side. Is it black and include the mounting hardware?

FirehawkSS?

 

The sun visors are trashed. But they are black! I'll check some of the other cars in the yard and maybe i can find some good ones. Let you know tommorrow.

 

try and get 2 sets of visors cuz i need some too thanks!

 

i also need that big long plastic piece that goes around the latches (attached to the top not the widshield) if it is in decent shape

 

That would be the fascia we are talking about I think.

 

The fascia is good except this part right here. You could fiberglass it in the back and you would never know. Wait ya you still would. Here is a pic to take a look at. When you press the piece together the crack dissappears.

 

No go on the sunvisors either. Weatherstripping is gone too. Sorry the sun out here takes its toll.

 

What color was the car? Int & ext?

 

wow that sucks, that has a crack worse than mine...i'll just see what i can do about fixing the one i have already

thanks anyways!

 

Yet to find one that's not busted there. They are easy to fix though.

 

interior is gray, seats are red, outside is red

 

i will take both front fenders off the car if u still have them.

 

Sunvisors on a convertible are the same as a T-top, and we all know there are plenty of those to be found in the boneyards.

As far as the center console switch, the tabs on mine busted too, but you can use the hatch release switch from non-convertible models. It's not original, but looks cleaner than a busted switch popping out of the console.

FYI- anytime anyone sees a convertible in the junkyard, pull as many convertible specific parts that are in useable condition as you can off of it. Ask questions later, they don't make 99% of these parts anymore and sooner or later (likely, sooner) you will find an interested party...

 

Damn if I am not having a hard time finding one.

 

I have some excellent condition gray sunvisors. I'll spray paint them black or dip em in grease. Since they are custom they run about $130. Let me know if you are interested

 

Very funny. NOT!

 

No, i talking about a different part that this car may not have come with, there is a long plastic piece that goes around the LATCHES on the top, not the piece that goes under the sunvisors. Similar in size.


also if yall need sunvisors, there is a good junk yard around here, i can check it out.

 

Yes I know which plastic piece you are talking about. It was gone before I got there. Fenders I'll have to check on. But i'm pretty sure theyre damaged.

 

http://www.cecoatings.com/images/Car...t/DSC00599.jpg

Would you guys buy em if they were made of fiberglass? Glack gel coat.?

 

are the Door wetherstripings there. little triangles behind the door. Inbwteeen the door and piller.?

 

No, it was cannibalized pretty good this week. Nothing as far as weatherstrip goes.

 

If you're interested, I'll see if I can't round up a set of decent ones next time I'm at the boneyard... (probably this weekend). PM me.

 

Im wondering if you might be able to get me one of the hinges for the folding top mech....that is if there still around ?

 

If you can see it in this pic than I can get it for you.

 

I sent you a pic of the part that i need, it connects to the rear bow, it's screwed directly to the rear bow and should be rivited to some of the other foling mech.... If you could see if it's there id be greatly appreciated..... THANKS !

 

Is this what you are looking for?

 

It's hard to tell, but im pretty sure that's it !!! I need the long piece with the two holes on one side and it's rivited to the rest of the mech. on the other How much do you want for it ? I dont need the stuffed alagator.... LOL

Thanks !

 

How does $10 plus shipping sound?

 

Sounds great, PM me with more details.....