84berlinettaV6

Does anyone have a design for a box that will fit into the rear well with plenty of cubic feet for 12's.

this link is dead and it had a good design

http://members.nbci.com/_XMCM/catdogg/speaker.html

j166a99

crutchfield has the Q-logic boxes custom built for our rear enclosures. i own one that houses 2 12" kicker solobarics...

------------------
'86WS7
Ram Air...
*EiyseWhite*

84berlinettaV6

I'm thinking more along the lines of building my own box. I'm short on cash and I've heard that building a box isn't all that tough. If anyone has a good design for a box that would be great!

Brent Swan

Hey 84,i recently was surfing around the message boards here and found a dude that makes them and sells them,they are so freakin awesome!!!,if you would like i could email his sight to you or possibly post his address here for you to respond to.Let me know..

Brent

------------------

Toys currently owned:
-91 MPFI Firebird
-97 Grand-Am GT
-96 Extreme Sonoma
-91 Suzuki GS500E
-89 Z28 Camaro(under construction)

Ziggy89Formula

I made my own box for two Infinity Kappa 10's. It was my first time making a box, but I did my research and it came out great. All you need is a tape measure and area formula (a=lxwxh) to design it properly. Since it was my first time making the box, I made a cardboard dummy first to see if everything fit before I cut the wood.
Remember: measure twice; cut once. If you're not "carpentry-inclined" I might just save up for one pre-fab. But if you've got the tools, did well in shop class, and only want to spend like $25 in materials- try it.

------------------
89' Firebird Formula
Black/grey cloth
305 TPI/5 speed/3.45 rear
dual cats/PW,PL/T-tops
K&N, SLP TB booster,
SLP exhaust, Jet chip


[This message has been edited by Ziggy89Formula (edited November 01, 2001).]