Car Audio Car audio related questions and helpful hints for building the best sound system for your car or getting the most out of what you have.

combo and what ...DB.... your hitting

Thread Tools
 
Search this Thread
 
Old 10-11-2000, 07:59 PM
  #1  
Junior Member
Thread Starter
 
SCOTTCAMARO1's Avatar
 
Join Date: Mar 2000
Location: BUCKHANNON,WV,USA
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
combo and what ...DB.... your hitting

ive got 1 12" base model rockfords and a pc275 amp by precision power im hitting a 136.4 DB and it will make the houses shake.found out the hard way $125.00 fine for excesive stereo they called it
Old 10-12-2000, 01:40 AM
  #2  
Member
 
evilho7810's Avatar
 
Join Date: Apr 2000
Location: chicago, il, us
Posts: 321
Likes: 0
Received 0 Likes on 0 Posts
How can you find out how loud you are DB?, and how about SPL? Can you just go to any sound shop and have them measure it?
Old 10-12-2000, 07:52 AM
  #3  
Junior Member
Thread Starter
 
SCOTTCAMARO1's Avatar
 
Join Date: Mar 2000
Location: BUCKHANNON,WV,USA
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
certain shops have the meters to do it.or find a competion and enter it thats what i did
Old 10-12-2000, 08:30 AM
  #4  
TGO Supporter

iTrader: (2)
 
Jim85IROC's Avatar
 
Join Date: Jul 1999
Location: Readsboro, VT
Posts: 13,579
Received 9 Likes on 8 Posts
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
There are a bunch of factors involved with getting an SPL reading, so I usually suggest that you enter a sanctioned competition that uses IASCA-style microphone placement on the passenger side of the dash, and with the windows up. I've seen single 12" subs hit 145+dB in local competitions that can only hit low 130s in IASCA style competition just because of microphone placement.

Last time (only time) I measured my system, I hit 141.1dB before I popped my breaker. I've got 2 12" Oz Audio 300L subs powered by a Kicker ZR600 amp. I could get at least 5 more dB out of it if I tweaked it, but then it would be on the ragged edge of blowing stuff, and I'm only into it for the sound quality anyway. I've got a pair of 10" Rockfords, and I may build a box and try to push those into the 140s.

------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
Old 10-18-2000, 09:37 PM
  #5  
Member

 
IROCET's Avatar
 
Join Date: Feb 2000
Location: Columbus, Ohio, USA
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 IROC-Z (Sold)
Engine: 5.7L
Transmission: 700R4
A friend of mine has a truck with 8 12" Atomic's running off two Memphis HC-100 amps. He hit 161 one time. He has only done it once that I know of. I am not sure what I am hitting with my my two 10" Atomics.

------------------
irocet@hotmail.com

drive.to/Stang_Kilr

88 IROC-Z -- 350 L-98, 700R4, Flowmaster, K&N, MAF Sceens Gone, Airfoil, March Pullies, Comp Cams Magnum 1.6 Roller Rockers, Accel U-Groove Plugs, Accel 8.8 mm Wires, Hypertech Cap & Coil, Hypertech Chip, Hotchkis Strut Tower Brace, One Loud Stereo!
Old 10-20-2000, 01:59 PM
  #6  
Junior Member
 
knighthelm's Avatar
 
Join Date: Sep 1999
Location: Winnipeg Manitoba. Canada
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
I was hitting 138.9Db with my old system of 2 RFP 1410 (10" punch) off a puch 100. It wasnt bad but the subs had a prblem with the spiders so I traded them for 2 xlc 12" and I will be running them off a 500a2. So i am waiting til next summer to install them in a custom box. Hopefully I can pull over 140Db
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
25
09-25-2021 07:55 PM
InfernalVortex
Electronics
10
04-20-2021 11:31 AM
RedLeader289
Tech / General Engine
10
05-28-2019 01:47 PM
Ed1LE
Suspension and Chassis
8
09-30-2018 09:14 AM
apie2546
Electronics
3
10-16-2016 02:24 PM



Quick Reply: combo and what ...DB.... your hitting



All times are GMT -5. The time now is 11:23 PM.