[TX] 81 Z28 w/ 468, a4, 3.73 in Houston f/s or f/t
#1
Thread Starter
Junior Member
Joined: Aug 2010
Posts: 1
Likes: 0
From: La Porte, Texas
Car: 1986 Formula clone
Engine: 355ci, Tfs 195s.
Transmission: Th350-3600 stall
Axle/Gears: Eaton posi 2.73
81 Z28 w/ 468, a4, 3.73 in Houston f/s or f/t
WTT For 87-92 spd formula, 91-92 Z28/Rs spd, 93-97 6spd formula or Z28.
81 Z28 with a 468, built 700r4 2600 converter, 702 close chamber heads fully ported and polished valves deshrouded, stainless steel valves 2.06 1.72s, telfon valve seals, comp 911 springs, Comp 282S 561 lift, 236 dur at 0.50, 110 lsa, with new lifters, comp 1.72 rr, Oil reststrictors in back of block, rpm intake, holley 750 vac sec, msd 6al with 6200 rpm chip, Msd pro billet dis, long tube headers, msd wires, serp bbc belt set up, Soild aluim body bushings, new front shocks and brakes, morose drag shock in rear, N90 rims that are refinished with m/t dr 255/60-15 and a 235-60-15 up front, 2 1/2 in steel cowl hood, All autometer gages, etc..
Also will trade for 5spd 3rd gen Firbird formula, 91-92 Z28/RS 5spd or 93-97 Firebird formula 6spd..
81 Z28 with a 468, built 700r4 2600 converter, 702 close chamber heads fully ported and polished valves deshrouded, stainless steel valves 2.06 1.72s, telfon valve seals, comp 911 springs, Comp 282S 561 lift, 236 dur at 0.50, 110 lsa, with new lifters, comp 1.72 rr, Oil reststrictors in back of block, rpm intake, holley 750 vac sec, msd 6al with 6200 rpm chip, Msd pro billet dis, long tube headers, msd wires, serp bbc belt set up, Soild aluim body bushings, new front shocks and brakes, morose drag shock in rear, N90 rims that are refinished with m/t dr 255/60-15 and a 235-60-15 up front, 2 1/2 in steel cowl hood, All autometer gages, etc..
Also will trade for 5spd 3rd gen Firbird formula, 91-92 Z28/RS 5spd or 93-97 Firebird formula 6spd..
#2
Junior Member
Joined: May 2009
Posts: 10
Likes: 0
From: Alamogordo, New Mexico
Car: 1986 Z28/1967 C10
Engine: LG4 305/LO5 350
Transmission: 700r4/Muncie SM420 granny
Axle/Gears: 2.73/4.10
Re: 81 Z28 w/ 468, a4, 3.73 in Houston f/s or f/t
you're probablly looking for a v8 but i have a 3.1L v6 5spd 92 camaro I am in new mexico though.