1991 Z28 SBC 400 VA 6000$
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Newport News, VA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z-28
Engine: L98
Transmission: 700R4
Axle/Gears: 3.23
1991 Z28 SBC 400 VA 6000$
Motor:
400 Small block bored .020 over. Fresh Rebuild
Scat 9000 externally balanced crank
Scat 4340 5.7in rods
Clevite bearings
Cloyes 2 piece timing cover w/ double roller timing set
Speed pro Hyper pistons w/ -6cc reliefs
Howards Solid lifter cam 248/251 duration, .532"/.541" lift
Moroso 7 Quart pan
Pro-Filer 210cc heads, 72cc Chambers, 2.08/1.6 valves, double wound springs good to .650 lift
Weiand Team-G single plane intake
Holley 750cfm 4150 double pumper carb
SFI Balancer and flexplate
Stainless steel 1.5 solid body roller rockers with full fulcrum bearings
Crane Hi-6r Ignition box with MSD coil
MSD Pro-Billet distributor
Car:
Mostly stock, Spohn Tie-rods and center link. All 4 tires are good. Exterior needs paint but no major rust. Interior in good shape. Has nice radio and speakers in it.
Need to have the headers or oil pan swapped out to install an exhaust. Currently it has a 7 quart oil pan which does not work with the headers that are on the car. I have a new 5 quart aluminum pan and the Y pipe that goes with the headers that go with the car. I don't have time to finish it and no more money left to put into the car.
Car is located in the Hampton Roads Area of VA.
400 Small block bored .020 over. Fresh Rebuild
Scat 9000 externally balanced crank
Scat 4340 5.7in rods
Clevite bearings
Cloyes 2 piece timing cover w/ double roller timing set
Speed pro Hyper pistons w/ -6cc reliefs
Howards Solid lifter cam 248/251 duration, .532"/.541" lift
Moroso 7 Quart pan
Pro-Filer 210cc heads, 72cc Chambers, 2.08/1.6 valves, double wound springs good to .650 lift
Weiand Team-G single plane intake
Holley 750cfm 4150 double pumper carb
SFI Balancer and flexplate
Stainless steel 1.5 solid body roller rockers with full fulcrum bearings
Crane Hi-6r Ignition box with MSD coil
MSD Pro-Billet distributor
Car:
Mostly stock, Spohn Tie-rods and center link. All 4 tires are good. Exterior needs paint but no major rust. Interior in good shape. Has nice radio and speakers in it.
Need to have the headers or oil pan swapped out to install an exhaust. Currently it has a 7 quart oil pan which does not work with the headers that are on the car. I have a new 5 quart aluminum pan and the Y pipe that goes with the headers that go with the car. I don't have time to finish it and no more money left to put into the car.
Car is located in the Hampton Roads Area of VA.
Thread
Thread Starter
Forum
Replies
Last Post
CarGuyDennis
Organized Drag Racing and Autocross
137
12-06-2016 11:02 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM