[IL] 1991 Camaro Z28 BBC with extras. !!!SOLD!!!
#1
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
1991 Camaro Z28 BBC with extras. !!!SOLD!!!
1991 Camaro Z28 with 69,xxx original miles. The car has had a SBC and TH400 Swap.
The car itself has the original paint, interior, rearend and suspension. No rust, has always been garaged. Original paint and body. The interior is still like new. Specs on the car.
Cloth interior 1 to 10 its a 9. No rips or tears.
No heater core
No radio
8 point chromoly 4130 tubular cage.
4 Inch Harwood cowl hood. needs to be painted.
Fog Lights
Power rear hatch
Lexan T Tops
T Top leather storage bag
New Fikse wheels and tires. $4,800 worth. Have reciepts.
Walbro 255 Fuel pump.
Custom 3 Inch X pipe.
Custom Trans Member
Custom Aluminum radiator
Custom Radiator fan mounts.
Power windows
Power door locks
Power mirrors
Power seat
Rear defroster
Viper alarm
Power Rear hatch
20% Window tint all around
Brand new carpeting
Motor specs
427 punched out to a 496 stroker.
Internally balanced
Bore 4.310
Stroke 4.250
New Scat Steel Crank
New Manley H Beam Rods
New SRP Pistons
New JE Rings
New Clevite bearings
New Chromoly Push Rods
New Springs
New Valves
New retainers
New Locks
New Keepers
New Valve seals
New Comp Cams Hydraulic roller lifters
New Comp cams Hydraulic roller cam Lift 612 Duration 314 on a Lobe of 110.
Chevy Oval port heads. 2.06 Intake 1.72 Exhaust
Canted degree angle.
Competition valve job.
New Timing chain
New Oil Pump
New Freeze Plugs
New Edelbrock RPM Air gap Dual Plane Intake
850 Demon carb
New March Pullies
New flex fan
New Edelbrock Mechanical Fuel Pump
New MSDdistributor
New water pump
New Moroso Plug wires
Air cleaner with new filter
New Alternator converted to one wire
New Thermostat housing and T stat.
New Valve cover breathers
Comes with Aluminum Overflow catch can
New High Torque stater
New Solid Motor mounts
New custom Aluminum Valve covers
The motor was thoroughly checked, hot tanked,pressure tested, bored, notched, line honed and assembled.
The motor dynoed on 518 HP and 541 TQ. Have the dyno sheet. The motor has the capabilities for 650HP with Aluminum heads naturally aspirated. It will also handle Nitrous.
The motor is together and has 540 miles on it since it was put together. Its ready from carb to oil pan ready to drop in. The only thing needed is either a flexplate or flywheel, spark plugs and your headers.
The motor cost $6,656 to build in just parts and machining. This doesnt include all the add ons of the engine. That was only the price of the long block. I have over 8 Grand in the entire setup.
I have all the reciepts for the motor build. $6,000 OBO
383 specs.
Brand new 4 bolt main block
Blocks been decked,bored.030,notched and line honed.
It also has the lifter valley coated for easier oil run off.
ARP Hardware throughout
Probe SRS forged pistons
Probe forged steel crankshaft
Probe forged 4340 rods
Race rings
CL77 bearings
New oil pump
Dual roller timing chain
Brand new Comp Cams Hydraulic roller(562/580 lift) (248/254 Duration at 50) 110 Lobe seperation. This will make power from 3200 to 6200 RPM.
Chromoly pushrods
Compcams Endure X roller lifters
Brand new Dart Pro 1 Aluminum heads assembled 230 cc intake ports,64cc combustion chambers, 2.080/1.0600 valves. 690 max lift springs
Probe aluminum rocker arms 1.52 ratio
B&B Adjustable Billet timing pointer
Pro Race balancer SFI approved
Jegs heavy duty Flexplate also SFI approved
Jegs fuel Block off plate
Moroso 7 quart oil pan,street strip with driver side dip stick, wet sump with trap door.
Edelrock 750 carb. Needs to be tuned.
Weiand Intake manifold that has been Jet Hot coated
chrome thermostat housing
MSD 6A box
$8,000 your choice of either motor and both transmissions. The car will also come with a extra rear bumper cover, it doesnt need it but I cant throw it out. Or take the car rolling for $4,500. Im willing to sell each motor by itself as well.
I have reciepts for it all.
383 has a little over 1000 miles on it since built. I have more pics of the 383 if needed.
The BBC
Any questions call mike. 847-489-1982
The car itself has the original paint, interior, rearend and suspension. No rust, has always been garaged. Original paint and body. The interior is still like new. Specs on the car.
Cloth interior 1 to 10 its a 9. No rips or tears.
No heater core
No radio
8 point chromoly 4130 tubular cage.
4 Inch Harwood cowl hood. needs to be painted.
Fog Lights
Power rear hatch
Lexan T Tops
T Top leather storage bag
New Fikse wheels and tires. $4,800 worth. Have reciepts.
Walbro 255 Fuel pump.
Custom 3 Inch X pipe.
Custom Trans Member
Custom Aluminum radiator
Custom Radiator fan mounts.
Power windows
Power door locks
Power mirrors
Power seat
Rear defroster
Viper alarm
Power Rear hatch
20% Window tint all around
Brand new carpeting
Motor specs
427 punched out to a 496 stroker.
Internally balanced
Bore 4.310
Stroke 4.250
New Scat Steel Crank
New Manley H Beam Rods
New SRP Pistons
New JE Rings
New Clevite bearings
New Chromoly Push Rods
New Springs
New Valves
New retainers
New Locks
New Keepers
New Valve seals
New Comp Cams Hydraulic roller lifters
New Comp cams Hydraulic roller cam Lift 612 Duration 314 on a Lobe of 110.
Chevy Oval port heads. 2.06 Intake 1.72 Exhaust
Canted degree angle.
Competition valve job.
New Timing chain
New Oil Pump
New Freeze Plugs
New Edelbrock RPM Air gap Dual Plane Intake
850 Demon carb
New March Pullies
New flex fan
New Edelbrock Mechanical Fuel Pump
New MSDdistributor
New water pump
New Moroso Plug wires
Air cleaner with new filter
New Alternator converted to one wire
New Thermostat housing and T stat.
New Valve cover breathers
Comes with Aluminum Overflow catch can
New High Torque stater
New Solid Motor mounts
New custom Aluminum Valve covers
The motor was thoroughly checked, hot tanked,pressure tested, bored, notched, line honed and assembled.
The motor dynoed on 518 HP and 541 TQ. Have the dyno sheet. The motor has the capabilities for 650HP with Aluminum heads naturally aspirated. It will also handle Nitrous.
The motor is together and has 540 miles on it since it was put together. Its ready from carb to oil pan ready to drop in. The only thing needed is either a flexplate or flywheel, spark plugs and your headers.
The motor cost $6,656 to build in just parts and machining. This doesnt include all the add ons of the engine. That was only the price of the long block. I have over 8 Grand in the entire setup.
I have all the reciepts for the motor build. $6,000 OBO
383 specs.
Brand new 4 bolt main block
Blocks been decked,bored.030,notched and line honed.
It also has the lifter valley coated for easier oil run off.
ARP Hardware throughout
Probe SRS forged pistons
Probe forged steel crankshaft
Probe forged 4340 rods
Race rings
CL77 bearings
New oil pump
Dual roller timing chain
Brand new Comp Cams Hydraulic roller(562/580 lift) (248/254 Duration at 50) 110 Lobe seperation. This will make power from 3200 to 6200 RPM.
Chromoly pushrods
Compcams Endure X roller lifters
Brand new Dart Pro 1 Aluminum heads assembled 230 cc intake ports,64cc combustion chambers, 2.080/1.0600 valves. 690 max lift springs
Probe aluminum rocker arms 1.52 ratio
B&B Adjustable Billet timing pointer
Pro Race balancer SFI approved
Jegs heavy duty Flexplate also SFI approved
Jegs fuel Block off plate
Moroso 7 quart oil pan,street strip with driver side dip stick, wet sump with trap door.
Edelrock 750 carb. Needs to be tuned.
Weiand Intake manifold that has been Jet Hot coated
chrome thermostat housing
MSD 6A box
$8,000 your choice of either motor and both transmissions. The car will also come with a extra rear bumper cover, it doesnt need it but I cant throw it out. Or take the car rolling for $4,500. Im willing to sell each motor by itself as well.
I have reciepts for it all.
383 has a little over 1000 miles on it since built. I have more pics of the 383 if needed.
The BBC
Any questions call mike. 847-489-1982
Last edited by Blown 346; 12-14-2011 at 10:48 AM. Reason: new price
#2
Junior Member
Join Date: Jan 2010
Location: Chicago, IL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Z28 - Red
Engine: 355 TPI
Re: 1991 Camaro Z28 BBC with extras.
holy crap. all I have to say. I wish I had money.
Last edited by derricksmash; 09-28-2011 at 11:11 PM.
#4
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
No trades. I need to pay off credit card bills.
To make things more clear.
The car doesnt come running. It comes with the BBC ready to drop in from carb to oil pan starter etc. It would only have to be dropped in and wired up.
To make things more clear.
The car doesnt come running. It comes with the BBC ready to drop in from carb to oil pan starter etc. It would only have to be dropped in and wired up.
#5
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: 1991 Camaro Z28 BBC with extras.
Will you sell the wheels separate? If you need a set to put on to sell the car I could do a partial trade with chrome z06 wheels 17x9.5" with new front tires and used Mickey dr's on the rear...?
#6
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
I will sell the wheels seperate as long as there isnt an interested party in the entire setup.
$3,500 for the set. I have a set of other thirdgen wheels I can stick on it.
$3,500 for the set. I have a set of other thirdgen wheels I can stick on it.
Trending Topics
#9
Supreme Member
Re: 1991 Camaro Z28 BBC with extras.
Does that 3500 include the tires as well? If so what type are they and what's the condition? Also are they custom fit or do you need spacers to go with them?
#10
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
Fronts are 225/40/17
Rears are 275/45/17.
The wheels are made for the fitment on and only on Third Gen style camaros.
History on the Fikse...
They make the wheels to order, they just dont have them laying around due to their price. You pay for the set and they make them over 6 weeks. They are made from high spun aluminum and are a 3 piece wheel. They are very light and are made for Road racing. Each individual wheel has a laser etched serial number.
#11
Supreme Member
Re: 1991 Camaro Z28 BBC with extras.
Very familiar with Fikse wheels, love them. Are you running a fourthgen rear?
#21
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
Considering selling the car as a roller, the wheels, and motors seperate.
#23
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
$4,500 firm.
Last edited by Blown 346; 12-19-2011 at 04:58 PM.
#31
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
Im open to all offers. My price isnt firm people, just my starting point.
$3000 for the wheels.
You never know what Ill take if you dont ask.
$3000 for the wheels.
You never know what Ill take if you dont ask.
Last edited by Blown 346; 11-20-2011 at 03:20 AM.
#35
Junior Member
Join Date: Oct 2011
Location: Great Falls MT
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 Camaro Z28 BBC with extras.
I once had a car shipped, and delivered to my door. It was great! I cannot afford it tho. House in Freeport is still for sale...still have a car there, too..Good Luck to you..Really like your 91.
#39
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
The wheels are sold.
New price for the car $8,000
If your not interested dont post, I dont like wasting my time.
New price for the car $8,000
If your not interested dont post, I dont like wasting my time.
#42
Junior Member
Join Date: Jan 2010
Location: Chicago, IL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Z28 - Red
Engine: 355 TPI
Re: 1991 Camaro Z28 BBC with extras.
like I said...wish I had cash. couldn't even offer you $1 for the car right now...lol. I will trade camaros though =)
#47
Member
Thread Starter
iTrader: (12)
Join Date: Apr 2005
Location: Loves Park/Rockford
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000CamaroSS,69 Camaro SS,91 Camaro
Engine: 383
Transmission: TH 400
Axle/Gears: Stock
Re: 1991 Camaro Z28 BBC with extras.
The car will come with the TH400 trans if bought as a roller. I have no need for it. Its a freebie.
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Exterior Parts for Sale
14
02-29-2016 08:40 AM
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM