cam548

http://newyork.craigslist.org/lgi/cto/1932645093.html

Hi you are looking at a worked 1992 Camaro that I have had since 1998 I am the second owner. I do not however have the cowl hood (I have the stock hood but you need a Cowl), really fast car ( car does not have heat or A/C). Call 631 255 7232 or email me at Thomasmcc1992@gmail.com
Features:
Shaved door handles
6 point roll bar (fits full interior)
Custom Autometer gauges with shift light
5 speed
3:73 Posi rear
T- tops
Custom hand made tail lights
Cadillac one piece headlights
Z28 high rise wing

Engine:
350 Bored 40 over
Air flow research heads ( custom ported & and a ton of work done to them)
Forged crank
Eagle I-beam rods
Forged pistons
Crane cams high lift (548) cam and springs
Crane 5.7 gold roller rockers with locks
High volume oil pump and welded pickup
ARP studs and fasteners
Edelbrock air gap high rise intake manifold
Holly 850 (mechanical secondary)
Fabricated (light weight) valve covers
Suspension:
Competition Engineering front struts
Morosso trick springs
Front cross drilled rotors and high temp bearings
The rear suspension is stock
Some polly bushings thought
The car is really great I just have changed direction. I would like to sell the car for $8,000 but I will also trade it for a nice driver from the 50’s 60’s or 70’s. I would also like a Delorean too. Trades must be drivable and have minimal to no rot or rust! I will also accept trades plus cash on your part…. Please no foreign cars unless Italian, AND NO JUNK I HAVE OVER $18’000 INTO THIS CAR AND I AM THE SECOND OWNER. The engine and tranny have less than 800 miles on them. The car just needs a little TLC and you will have one mean *** street car!!

cam548

Well the tail lights I. Made by hand, I made them this way so I could install a power switch on one tail light and jumper terminals on the other. By the way the main power switch and terminals are there now. That pic was an old one. I usually only buld with purpose in mind.

Steve86TA

iTrader: (57)

You need to post the add and a price$$..not just a link

//<86TA>\\

iTrader: (15)

needs more pics and better detail, thats still a lot of money for what i see.

cam548

I am just looking to sell a car and if you don't like it keep it to yourself.

Fyi I have over $8,000 just in the engine..... and for thoes of you who don't like the taillights.... Bring your own I'll swap em out and give you $200 off the asking price.

92 Formula

iTrader: (2)

Cleaned up the ad. If you want to post in this ad, respect cam548's post here that I bolded, per board rules please.

Also, cam548, maybe I'm missing it, but I do not see where you posted your asking price as Steve advised. Per board rules please post that. If I missed it I apologize in advance. Good luck on your sale.

cam548

I would like to get around $8,000 for it I have close to $18,000 into it with a stack of reciepts. I can't post pics right now but use the link http://newyork.craigslist.org/lgi/cto/1932645093.html Here is a list of mods done to the car keep in mind there has only been about 800 miles on all of this stuff since the build in 2002.

Hi you are looking at a worked 1992 Camaro that I have had since 1998 I am the second owner. I do not however have the cowl hood (I have the stock hood but you need a Cowl), really fast car ( car does not have heat or A/C). Call 631 255 7232 or email me at Thomasmcc1992@gmail.com
Features:
Shaved door handles
6 point roll bar (fits full interior)
Custom Autometer gauges with shift light
5 speed
3:73 Posi rear
T- tops
Custom hand made tail lights
Cadillac one piece headlights
Z28 high rise wing

Engine:
350 Bored 40 over
Air flow research heads ( custom ported & and a ton of work done to them)
Forged crank
Eagle I-beam rods
Forged pistons
Crane cams high lift (548) cam and springs
Crane 5.7 gold roller rockers with locks
High volume oil pump and welded pickup
ARP studs and fasteners
Edelbrock air gap high rise intake manifold
Holly 850 (mechanical secondary)
Fabricated (light weight) valve covers
Suspension:
Competition Engineering front struts
Morosso trick springs
Front cross drilled rotors and high temp bearings
The rear suspension is stock
Some polly bushings thought
The car is really great I just have changed direction. I would like to sell the car but I will also trade it for a nice driver from the 50’s 60’s or 70’s. I would also like a Delorean too. Trades must be drivable and have minimal to no rot or rust! I will also accept trades plus cash on your part…. Please no foreign cars unless Italian, AND NO JUNK I HAVE OVER $18’000 INTO THIS CAR AND I AM THE SECOND OWNER. The engine and tranny have less than 800 miles on them. The car just needs a little TLC and you will have one mean *** street car!!