tron88

Its time to see if this camaro can find a good new home. We have had this car for just about 13 years now. It started life as a hardtop black 350 iroc z. never hit, no rust, babied! Here is what has been done:
468 ls7, 4 bolt mains, full forged and studded short block
698 roller cam, roller lifters, roller rockers with stud girdles
6 inch cowl hood,
becool radiator with dual chrome electric fans
manual steering box, no problems turning it at all
wildwood race brakes in all four corners
fluildamper balancer
3 piece alum competition timing cover
team g water pump
march aluminum pullies and brackets
hooker super comp headers
Fully ported dart merlin heads with 2.25 severe duty valves
ported team g intake
holley 950 carb
2 stage edelbrock NOS kit, never used, but installed
MSD probillet distributor, 6AL, and MSD timing retard
strange struts with coilovers
aeromotive 1200 hp fuel system with sumped tank, 1/2 lines
th400 w/transbrake and 4k stall
currie built 31 spline 9 inch, nodular center with 4.10's
8 point rollbar, corbeau seats with 5 point harnesses, all autometer gauges in dash, shaved door handles and all tinted windows, 18 inch chrome rims w/toyo tires, new, line loc, painless switch panel, a ton of money in this car. 9.5 to 1 comp, designed to run for power tour. car is easily a ten second car without the spray. Not a car for the tame! sounds awesome! my neighors just love me. Looking to restore a 70 camaro, so this old girl needs to give up the garage. The body is very clean and straight. looks great! I am asking $13,900 for the car. black interior. only the best parts were used on this car, a lot of the work was professionally done.
I have pics, but cant seem to upload them!!

tron88

http://chicago.craigslist.org/sox/car/495564537.html this might help for some pics. Thanks..

tron88

12,900. I am surprised that not one person had any interest in this car!

MIKEYDZ28

i think you need to emphasize the ls7 part and fix the link to the picks. definitely a killer price, that car has to move out ridiculously

stealthram92z

iTrader: (2)

very nice, I own the chevelle, did you see the pics. Later Les

tron88

chevelle looks pretty nice to me! I like that bright blue! I have a small storage issue at the moment! I have cars all over the city at this point! but can you send me some more pics?
I cant figure out how to post pics to this site. The link was to an ad that expired. SO thats no good at this point! The car will easily go into the mid 10's. I think on the spray, which i have never used, the car should go into the 9's. The motor was built to handle it! Thanks the input though! Somebody will eventually pick this camaro up and fall in love with it!

stealthram92z

iTrader: (2)

I'll see what I can do on pics of the chevelle. Couold you send me some pics of the camaro, and if your not interested in the chevelle I'll post them on here for you. Later Les

tron88

HI les, you would be willing to post my pics for me? They are too big and I have no idea how to resize them. I would love a chevelle, but I just dont have any place to put it. And, I would have to sell that other camaro. But, time will tell!

85maroz28

pics to belyk85@yahoo.com

tron88

http://s252.photobucket.com/albums/hh12/tron88iroc/

stealthram92z

iTrader: (2)

I see you got the pics up, looks awesome, gl with the sale Les

tron88

thanks les! you too! I hope your car goes to a good home! Notice the dust build up on the rear axle? This poor car just sits in the garage. I had to get pics up. It seems a guy on on ls1 tech almost took it personal that I didnt have them up. I really appreciate you offering to do that for me!

tron88

here are some more details and corrections:
wilwood dynalite pro heavy duty front and rear brakes with master etc
ultradyne roller cam with crane roller rockers, lifters and crane stud girdle
total seal rings
roll pistons
TSI 4k stall
a1000 fuel pump
manley severe duty ss valves, with titanium retainers
hi torque mini starter

tron88

tron88

11,900 for a quick no haggle sale. Just a steal.

WIll36

iTrader: (12)

amazing car man. If i hadn't started a similar project myself i might just have bought this one from you. What kind of wheels are those and also what cage did you use?

tron88

too bad that you already started! this car would have saved you countless thousands! I say this because of the countless thousands that I am never to see again!!
Thanks for the compliment though! The car really shows great! The wheels are made by a place called STERN. The wheels with tires were just under 3k. Very nice pieces! The cage was thrown in by a place called FABTECH out this way. If I remember right, it was Competition Engineering. Good luck with you camaro! I am sure you will love it when its all done!

Cam-aro

iTrader: (4)

Where do you live?

tron88

just outside chicago

i_love_thirdgen

iTrader: (3)

beautiful car tron, that's really one bad camaro.

sammyrocker5150

BADAZZ CAMARO MAN! If it were 5 speed or 6 speed I'd own it already.

tron88

Thanks guys!! I do appreciate the good words! Not too many like this one! A 6 speed would be pretty cool though!

tron88

ttt

Joey D

thats a nice car. my brother has a similar setup, his is tubbed tho. too bad you are all the way in chicago, and i am in nj