89 Camaro RS 3.1v6 (Long Island, NY)
#1
Thread Starter
Senior Member
iTrader: (9)
Joined: Nov 2006
Posts: 532
Likes: 0
From: LI, NY
Car: 90 Camaro RS
Engine: 2.8L v6
Transmission: 700
Axle/Gears: 3.23
89 Camaro RS 3.1v6 (Long Island, NY)
Hey folks. I have to get rid of this car because 1- I don't want it anymore, 2- I need money aaaaaaaaand 3- I don't want to hear any more crap from my Grandma saying that car sitting in the backyard makes it look like a junkyard. Im askin $800. I apologize for the dirt on the car. My hose is frozen so I can not wash the car. If or when I do, I will post what she looks like cleaned.
Also parting out this car!
Interior Thread
Exterior Thread
Here's the info
89 Camaro RS.
3.1 v6 (150k+ miles. It's from my 90 RS). Has the 2.8 top Plenum. (think thats what it is called). Never ever had a problem with this engine while it was in my 90 RS. It started right up everyday all the time.
Automatic Transmission (150k+ miles. It's from my 90 RS). The tranny is a little sluggish due to it having all those miles on it. It is driveable and I havent had any problems with it when it was in my 90 RS.
2 year old Dynomax Exhaust system. (Cat back)
The hood on the car is in excellent shape. The paint is faded that is all.
It does have an exhaust leak from the driver side header which you can see from the pic. 2 New bolts and screws, problem solved.
Hypertech chip.
K&N Filters. Need to be cleaned.
T-Tops. They do have a little leak. I do not have the key for them either.
There are chips in the paint and some rust spots. Which you can see in the pics. Besides the paint chips and little rust the body is in great shape. The ONLY "dent" I can see is in the driver side door. It can easily be pulled out IMO.
Needs a new Battery.
Needs a new Altenator.
Needs a new Fan Relay Switch. (so the fan kicks on).
Needs new pistons for the hood so it can stay open on its own.
Will need a new Driverside Door Hindge. The door can open and close.
Dashboard is cracked. You can see that in the pic.
Earlier this year while driving at night I had ran over a 20 pound Trailer Hitch. It ripped a hole into the Driverside floor pan. I had a new piece of sheetmetal put in to fix the damage. It is sealed and Waterproof.
Now onto the pics:
Also parting out this car!
Interior Thread
Exterior Thread
Here's the info
89 Camaro RS.
3.1 v6 (150k+ miles. It's from my 90 RS). Has the 2.8 top Plenum. (think thats what it is called). Never ever had a problem with this engine while it was in my 90 RS. It started right up everyday all the time.
Automatic Transmission (150k+ miles. It's from my 90 RS). The tranny is a little sluggish due to it having all those miles on it. It is driveable and I havent had any problems with it when it was in my 90 RS.
2 year old Dynomax Exhaust system. (Cat back)
The hood on the car is in excellent shape. The paint is faded that is all.
It does have an exhaust leak from the driver side header which you can see from the pic. 2 New bolts and screws, problem solved.
Hypertech chip.
K&N Filters. Need to be cleaned.
T-Tops. They do have a little leak. I do not have the key for them either.
There are chips in the paint and some rust spots. Which you can see in the pics. Besides the paint chips and little rust the body is in great shape. The ONLY "dent" I can see is in the driver side door. It can easily be pulled out IMO.
Needs a new Battery.
Needs a new Altenator.
Needs a new Fan Relay Switch. (so the fan kicks on).
Needs new pistons for the hood so it can stay open on its own.
Will need a new Driverside Door Hindge. The door can open and close.
Dashboard is cracked. You can see that in the pic.
Earlier this year while driving at night I had ran over a 20 pound Trailer Hitch. It ripped a hole into the Driverside floor pan. I had a new piece of sheetmetal put in to fix the damage. It is sealed and Waterproof.
Now onto the pics:
Last edited by rsrsrs; 02-24-2007 at 01:20 PM.
#6
Supreme Member
Joined: Nov 2006
Posts: 1,724
Likes: 1
From: NY sucks
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
SO theres nothing else wrong with the car? and would you be willing to lower the price some more?
#7
Thread Starter
Senior Member
iTrader: (9)
Joined: Nov 2006
Posts: 532
Likes: 0
From: LI, NY
Car: 90 Camaro RS
Engine: 2.8L v6
Transmission: 700
Axle/Gears: 3.23
Yea thats all the problems with it. I loved this car when I was driving it. Tight suspension which I liked.
How much you wanting to pay for it Viper?
Sorry but I'd much rather just sell the entire car. There's too many people out there that won't buy a car due to it not having nice rims.
How much you wanting to pay for it Viper?
Sorry but I'd much rather just sell the entire car. There's too many people out there that won't buy a car due to it not having nice rims.
Trending Topics
#10
Supreme Member
Joined: Nov 2006
Posts: 1,724
Likes: 1
From: NY sucks
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
i only have around $500 to spend, but about getting it up here as i live in the finger lakes region would you be able to bring the car or mamybe halfway or something? Thanks
#23
Junior Member
Joined: Sep 2006
Posts: 4
Likes: 0
From: Pennsylvania
Car: 1990 Camaro RS and 1987 PowerRam150
Engine: 3.1 v6 & 5.2 v8
Transmission: auto.
Axle/Gears: limited slip, 3.70
3.1 V6
i was wondering .. would you consider .. for the motor itself, think about lowering the price at all .. i am very interested in buying that so please let me know, reply to my e-mail or on here either is fine thank you
#25
Junior Member
Joined: Apr 2002
Posts: 70
Likes: 0
From: Inwood long island
Car: '79 T/A and '84 T/A
Engine: 455 buick and 305 chevy
Transmission: TH400 and T-5
Do you still have that car? Let me know. also where on LI are you. Im in nassau and I haev a friend looking for a car ASAP and I think this car would be great for her. I would be able to come out and look some time soon.
~Vinny
~Vinny
#26
Thread Starter
Senior Member
iTrader: (9)
Joined: Nov 2006
Posts: 532
Likes: 0
From: LI, NY
Car: 90 Camaro RS
Engine: 2.8L v6
Transmission: 700
Axle/Gears: 3.23
I have people that want parts from the car. Promised them i'd put them to the side for them so I really don't want to go against my word and look like an *******.
Sorry.
Sorry.
Thread
Thread Starter
Forum
Replies
Last Post