must sell 1992 Z28 ZO3
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Houston
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
must sell 1992 Z28 ZO3
the car needs work but has no rust or major mods done. will run and drive but has a knock. 305 5 speed with ttops. 308 posi cold air and it is white with red cloth. Location is Houston and $2500.00 firm.
#2
Member
iTrader: (3)
Join Date: Aug 2004
Location: Atlanta, GA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Car: 95 Acura Integra GS-R
Engine: B18C1
Transmission: 5 spd.
Originally Posted by jlandrov
will run and drive but has a knock.
#3
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Houston
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
knock
I beleive the knock is either one of the bolts that hold the preasure plate to the fly wheel backed off and is hitting the bell housing or it is a rod or main bearing. I had a guy put a rebuilt 5 speed in this car a few months back and he thinks on of the bolts may have stripped out. I also lent the car to a relative a while back and I told him to check the oil and who know if he ran it low. I was planning on putting a 350 I have in it but dont have the time or money . To many other projects. I also have another 305 crank and rods so it would only need a set of bearings and gaskets to get the 305 going again ($200.00) If its the flywheel bolt I would helecoil it a replace the clutch and pleasure plate. ($200.00)
Originally Posted by yjischoking
what do you think its from? any guesses as to how much to fix it?
#5
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Houston
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
RPO CODES
I dont have my camera with me but here are the codes. If you still want to see the picture I can get it tommarow.
1G1FP23FONL155034 FFP87
AJ3 AM9 AR9 B18 B34 B35 CC1 C49 C60 D34 D35 D5U
D8M D81 E52 E9Z F41 G04 IPC JG1 J42 K68 LB9 MN5
M39 NA5 NP5 N64 N96 QMT T96 UB3 UN6 UQ1 U79 VAN
VK3 V73 ZO3 Z28 IAY 1SZ IOQ IOU 40P 6XT 7XT 73C
73I 739 8NL 9NL
BCCC WA-L9567 V9567 73C
1G1FP23FONL155034 FFP87
AJ3 AM9 AR9 B18 B34 B35 CC1 C49 C60 D34 D35 D5U
D8M D81 E52 E9Z F41 G04 IPC JG1 J42 K68 LB9 MN5
M39 NA5 NP5 N64 N96 QMT T96 UB3 UN6 UQ1 U79 VAN
VK3 V73 ZO3 Z28 IAY 1SZ IOQ IOU 40P 6XT 7XT 73C
73I 739 8NL 9NL
BCCC WA-L9567 V9567 73C
#6
Senior Member
Join Date: May 2006
Location: Bartlesville, OK
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Cummins HO
Engine: 350 HSR
Transmission: T-56
Axle/Gears: 3.43
Where in Houston are you located? I will be there at the weekend, maybe come over to take a look?
Cheers,
Richard.
Cheers,
Richard.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Houston
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
1992 Z28 Z03
ya still have the car, knock is fixed. It was a rod bearing and i replaced the crack and bearings but have not finished bolting everything back up. Where do you want me to send pics to?
Thread
Thread Starter
Forum
Replies
Last Post
diana227vegas
Camaros for Sale
10
07-08-2016 12:27 AM