Pics of outragous f-bodies
#52
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
Originally posted by YRUSOSLO
Jett- if you wanna pay for your F-body to look like a rice car- sell it and go buy a Honda. Don't get me wrong I like some kits on our cars but that just doesn't look right to me. If you wanna spend seven grand to get a rice look just buy a rice car, just don't lose the F-bod you'll regrett it later.
91teal you can post your opinions dude just don't start a flame war- not becoming of a moderator
Still looking for opinions on the reverse doors
Jett- if you wanna pay for your F-body to look like a rice car- sell it and go buy a Honda. Don't get me wrong I like some kits on our cars but that just doesn't look right to me. If you wanna spend seven grand to get a rice look just buy a rice car, just don't lose the F-bod you'll regrett it later.
91teal you can post your opinions dude just don't start a flame war- not becoming of a moderator
Still looking for opinions on the reverse doors
#54
Spindr- That car makes me drool!! Yeah baby that is TRICK!!
:hail: :hail: :hail: :hail: :hail: :hail: :hail:
I'm in love that ride is sweet- duz he have a webpage? Suicide doors baby. I think it would actually be easier to get in and out and step over your roll cage to boot.
TealRS- no prob I'm an "old" guy myself
:hail: :hail: :hail: :hail: :hail: :hail: :hail:
I'm in love that ride is sweet- duz he have a webpage? Suicide doors baby. I think it would actually be easier to get in and out and step over your roll cage to boot.
TealRS- no prob I'm an "old" guy myself
#56
The k1 is an awesome desing, at least the front, the rear look to much like a blend of various ferraris thing I dont like.
The front look a little like the new eclipse (the lights)
I really like the front air damm (or spoiler) I would like to modify mine to look like that.
Anyone had seen a camaro with projector headlamps? in wich materials one could make the support for those kind of lights, they must get pretty hot.
I would like a little lower headlights units so I can use the space left above them to ram air to a cold intake.
I would need to do some drawings to see how those mods would look like.
The front look a little like the new eclipse (the lights)
I really like the front air damm (or spoiler) I would like to modify mine to look like that.
Anyone had seen a camaro with projector headlamps? in wich materials one could make the support for those kind of lights, they must get pretty hot.
I would like a little lower headlights units so I can use the space left above them to ram air to a cold intake.
I would need to do some drawings to see how those mods would look like.
#58
Member
Joined: May 2001
Posts: 317
Likes: 0
From: Staten Island, New York, USA
Car: 1987 Iroc Z "Classic Roc"
Engine: 5.7 350
Transmission: Auto
Uhm, how 'bout this?
http://www.indiemonkey.com/firebird/tan20.jpg
http://www.indiemonkey.com/firebird/tan18.jpg
Check it out.
http://www.indiemonkey.com/firebird/
http://www.indiemonkey.com/firebird/tan20.jpg
http://www.indiemonkey.com/firebird/tan18.jpg
Check it out.
http://www.indiemonkey.com/firebird/
#59
i just got back from walmart and i was drivin home and i saw this fred formula head towards me.. i looked at it when it came by and he totally screwed the whole thing up, some mexican dude put on some lil rear tires and had them stickin out about 7 inches from the car and lil skinny donut front tires and he had this big Supra style wing on the back of it.. it was like a mix between a dragster wanna be, mexican low rider and *****.. it was the ugliest thing i saw.. give f-body bad name.
#60
Senior Member
Joined: Mar 2002
Posts: 741
Likes: 0
From: Azusa, CA
Car: 92 Z28 Camaro
Engine: Procharged 406.
Transmission: T-56
Axle/Gears: Moser 9" 4.11 Gears
Originally posted by Kandied91z
it's not a 3rdgen, but it's one of my favorites.
it's not a 3rdgen, but it's one of my favorites.
So Was your second Picture of that 91 Z. I know because the owner of the 94 Z is a friend of mine and the 91 beat me at the same show, my car was right next to it.
92 camaro 1DWNCAM featured in super chevy august 2001 & the winter issue of performance camaros.
#61
Supreme Member
Joined: Jul 2001
Posts: 1,731
Likes: 0
From: LaFayette, NY
Car: '10 Subaru Forester
Engine: 2.5 Boxer
Transmission: 4EAT
Axle/Gears: 4.44
Who can forget this timeless classic... The new kids on the block had a very strange idea of what a thirdgen should look like:
#63
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Originally posted by ChillPhatCat
Who can forget this timeless classic... The new kids on the block had a very strange idea of what a thirdgen should look like:
Who can forget this timeless classic... The new kids on the block had a very strange idea of what a thirdgen should look like:
Too bad it's got a monster blower with STOCK EXHAUST MANIFOLDS.
#68
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 2,181
Likes: 1
From: Cherry Hill, NJ
Car: 92 Trans Am 'Vert
Engine: 305 TPI
Transmission: 5 Speed
Originally posted by ChillPhatCat
Who can forget this timeless classic... The new kids on the block had a very strange idea of what a thirdgen should look like:
Who can forget this timeless classic... The new kids on the block had a very strange idea of what a thirdgen should look like:
#69
Supreme Member
iTrader: (15)
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Originally posted by 88 WS6 TransAm GTA
Ya know whats funny about that car? It still has the STOCK exhaust manifolds on it! :lala:
Ya know whats funny about that car? It still has the STOCK exhaust manifolds on it! :lala:
#72
Member
Joined: Aug 1999
Posts: 390
Likes: 0
From: Fresno CA USA
Car: 89 IROCZ28
Engine: 350TPI
Transmission: 700R4
Axle/Gears: 2.77 Gears
I wish I had some pictures of it, and I've only seen it once, but there is some idiot here in my town that has what appears to be a camaro coming towards you but then it has a complete transam rear end on it. Tail lights rear bumper even badging. Then the entire front is all camaro. Then to top it all off it has about 4 different colors of paint on it. Man it is one ugly son-of-a-b!tch!
Ryan
Ryan
#73
Supreme Member
Joined: Jul 2001
Posts: 1,731
Likes: 0
From: LaFayette, NY
Car: '10 Subaru Forester
Engine: 2.5 Boxer
Transmission: 4EAT
Axle/Gears: 4.44
Originally posted by XxMoLexX
how can ya tell?
how can ya tell?
The under the hood shots showed a nice shiny engine compartment with stock rusty manifolds sticking out like a sore thumb. The shot of the rear had a parachute on it... LOL the car probably couldn't pull more than a 13.0 in the 1/4 mile.
#74
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
Originally posted by dakkon
http://www.k1-styling.sk/default2.html
for $7000 dollars ur 3rd gen could look like this.
http://www.k1-styling.sk/default2.html
for $7000 dollars ur 3rd gen could look like this.
#75
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
Originally posted by Jim85IROC
I think we have a new contestant:
I think we have a new contestant:
i doubt he'd fit inside it though
#78
Moderator
Joined: Mar 2001
Posts: 14,242
Likes: 171
From: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Here is one from the T/A nats, thought it was curious, I think it might actually be the same car as the gold one, but further in its development.
John
John
#80
Moderator
Joined: Mar 2001
Posts: 14,242
Likes: 171
From: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
I do not think it was anything special to start with, it only had an LO3 or LG4 engine to start with, so its NOT an 89+ Trans Am or GTA.
It Was a trans Am tho, because the 4th didget was a W not an S.
John
It Was a trans Am tho, because the 4th didget was a W not an S.
John
#83
Member
iTrader: (2)
Joined: Jul 2002
Posts: 228
Likes: 0
From: Smithfield, VA
Car: 85 Tojan
Engine: ZZ4
Transmission: T56
Axle/Gears: 9", 3.50
85 Tojan
I though you guys might like this. This is my 85 Tojan. It's a limited production built by Knudsen auto in Nebraska. I've got #19 of 300. This has been a project for over 5 years now. It was beat down when I got it.
ZZ4 crate motor
SLP exhaust 1 3/4 headers and all the way back
Corbeau Carrera seats and harnesses
soon to have superram intake and KB subframes.
ZZ4 crate motor
SLP exhaust 1 3/4 headers and all the way back
Corbeau Carrera seats and harnesses
soon to have superram intake and KB subframes.
#84
Member
iTrader: (2)
Joined: Jul 2002
Posts: 228
Likes: 0
From: Smithfield, VA
Car: 85 Tojan
Engine: ZZ4
Transmission: T56
Axle/Gears: 9", 3.50
bad pic
sorry, that pic didn't post well. I can't seem to get my photo resaved in a small enough format to post well. anybody have a clue how. I've got a 1mb pic and we can only post 102kb. photo shop will only let me bring it down to 200kb and that was 62 kb from photo ed.
#89
would i saound stupid if i said there was one of those transam station wagons at the junkyard up the streat from my house... its yellow with flames and there is a camaro on top of it..
couldnt see the VIN # sorry guys
couldnt see the VIN # sorry guys
#91
Someones probably put this up before. A bunch of customized thirdgens. some are kinda out there...
http://www.chevyworld.net/thirdgen/cbody1.htm
http://www.chevyworld.net/thirdgen/cbody1.htm
#93
Supreme Member
Joined: May 2002
Posts: 1,951
Likes: 1
From: pefferlaw ontario
Car: 1987 iroc-z custom
Engine: 355 tuned port
Transmission: 5spd baby, only way to go
Axle/Gears: 3.45
logical..i havent taken it to the paint shop yet...im still looking for someone that will do a really nice job(unlike the job that was done previously) youd understand more if you seen the car in person...kind of has the orange peel effect but it was caused from going 1000000 different ways when sanding...just something else to add to my list of stuff to do this winter..
it should come out just b4 our (canada) first long weekend may 24 2003..with a new hood, interior spoiler(which is on its way) and rims too...
iroc2nv
it should come out just b4 our (canada) first long weekend may 24 2003..with a new hood, interior spoiler(which is on its way) and rims too...
iroc2nv
#97
that euro kit for the f-body is not ricing out a f-body.....that is a kit car...everything that IDs that car visually as an f-body is taken away and replaced...it is a kit car. What needs to be done is what a company around here does....get beat up Sport Coupes and RS and that such. Hell if they even want a ***** engine a turbo 3.8 in there would be TIGHT.....i would rock that euro car with a turbo 3.8 from a GN....it is just like the Cobra kits that are based on the Mustang II frames.....
#99
Moderator
Joined: Mar 2001
Posts: 14,242
Likes: 171
From: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
That car looks like someone drove it off a pier and thought it was a boat :nono:
John
John
#100
Member
Joined: Apr 2003
Posts: 291
Likes: 0
From: Centerville, Ohio
Car: '05 Pontiac G6
Engine: 3.5
Transmission: Auto
Axle/Gears: Slow lol.
OK, for those of you that kinda like the Evo kit. It's a photochop, but makes it look a hell of alot better to me. A good drop and some 18" Forgeline WC3 wheels, and put it into motion and this is what it would look like if I did it. And I'd have a motor built to back up the looks, lol.