People interested in a Billet Grille, look inside...
#1
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
People interested in a Billet Grille, look inside...
If you want a billet grille that looks like this:
.....
Please send a personal email to me with the subject "Billet Grille". I talked to the guy who made it for me, and he said that if we can get 10 people on this, he can do it for $150 each + shipping. There is a catch, though. He works A LOT, and will not be able to finish them for a LONG time. He said that it will most likely take until January 2002 to complete the grilles. I know I am kind of jumping the gun here, but I am just letting you guys know about this. Please only email if you are serious about buying one of these. I will keep you name on hand and send you an email close to the end of the year, and I will also repost this message. Thanks guys.
[This message has been edited by Scott_92RS (edited November 08, 2001).]
[This message has been edited by Scott_92RS (edited November 08, 2001).]
.....
Please send a personal email to me with the subject "Billet Grille". I talked to the guy who made it for me, and he said that if we can get 10 people on this, he can do it for $150 each + shipping. There is a catch, though. He works A LOT, and will not be able to finish them for a LONG time. He said that it will most likely take until January 2002 to complete the grilles. I know I am kind of jumping the gun here, but I am just letting you guys know about this. Please only email if you are serious about buying one of these. I will keep you name on hand and send you an email close to the end of the year, and I will also repost this message. Thanks guys.
[This message has been edited by Scott_92RS (edited November 08, 2001).]
[This message has been edited by Scott_92RS (edited November 08, 2001).]
#2
Supreme Member
Join Date: Jun 2001
Location: CT
Posts: 1,383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Trans Am WS6
Engine: 305HO L69
Transmission: T5
wow that looks gorgeous. i wouldn't buy it now cuz i'm a poor biatch. but january 02, maybe. when do we have to let you know by?
#3
I love it.......BUT it would cost me a lot to get it to me here in Australia plus converting the money....too much for me to pay and then have to worry about getting pulled over but the cops...sorry
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
Get ICQ Page My ICQ
ICQ # 18562788
------------------
1982 Z28 Camaro
305ci LG4, Muncie 4-Speed, Holley Carburettor (CFM Unknown), 2.5" Stainless steel exhaust all the way through.
Fibreglass hood.
Boston 4x6" CX7e 2-ways, 6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
Get ICQ Page My ICQ
ICQ # 18562788
------------------
1982 Z28 Camaro
305ci LG4, Muncie 4-Speed, Holley Carburettor (CFM Unknown), 2.5" Stainless steel exhaust all the way through.
Fibreglass hood.
Boston 4x6" CX7e 2-ways, 6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
#6
Shame on you i was going to the other post looking for the info. Hehe, count me in. <it would look bad if I backed out of it since i am the one who asked in the first place>
#7
i see why its only $150, it only has a few billet bars and looks like it is cut at a too short length.
I personally would rather pay more for the one at streetbeatcustoms.com because that one has at least twice as many bars and has a closer fit.....but thats just my opinion, and we all know what those are like.
I personally would rather pay more for the one at streetbeatcustoms.com because that one has at least twice as many bars and has a closer fit.....but thats just my opinion, and we all know what those are like.
Trending Topics
#8
Personally I like the fact that it has a more open look to it. Gives it more of a racey look imho. Also if it makes it cost less then im even happier ) I dont know what you mean by cut to short however? Do you mean it looks like it doesn't fit the front fender?
#9
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
<font face="Verdana, Arial" size="2">Originally posted by sheet outta luck:
i see why its only $150, it only has a few billet bars and looks like it is cut at a too short length.
I personally would rather pay more for the one at streetbeatcustoms.com because that one has at least twice as many bars and has a closer fit.....but thats just my opinion, and we all know what those are like.</font>
i see why its only $150, it only has a few billet bars and looks like it is cut at a too short length.
I personally would rather pay more for the one at streetbeatcustoms.com because that one has at least twice as many bars and has a closer fit.....but thats just my opinion, and we all know what those are like.</font>
#12
Moderator
Join Date: Jun 2000
Location: London, Ontario, CANADA
Posts: 2,364
Likes: 0
Received 4 Likes
on
2 Posts
That looks like a modified billet grille made for a truck. I kind of like it... but I would want one where the bars go right to the edges.
------------------
johnyIROC 1983 Z28
"5.0 is way too slow"
------------------
johnyIROC 1983 Z28
"5.0 is way too slow"
#13
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
I cant see what you guys are talking about? The grille is plenty long and it fills the hole perfectly. I guess when I get some better pics you'll see what I mean.
#15
Supreme Member
Join Date: Mar 2001
Location: Portland, OR www.cascadecrew.org
Posts: 6,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
hey scott_92rs, did you get my e-mail??
i sent one, but never got a reply?
i sent one, but never got a reply?
#19
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
I'm going to send a reply email to everyone that has sent me an email. They will probably come tonight, or early tomorrow. If you dont get one and you think you should have, let me know.
Scott
Scott
#20
For those of us with driving lights would we have to take them off? Is there anyway to put driving lights on this grill??
THANKS!
------------------
1989 Camaro RS
305 TBI
Gunmetal Metalic Paint
Grey Interior
4th Gen Seats
145mph Speedo
Kenwood eXcelon head unit
eXcelon front and rear speakers
THANKS!
------------------
1989 Camaro RS
305 TBI
Gunmetal Metalic Paint
Grey Interior
4th Gen Seats
145mph Speedo
Kenwood eXcelon head unit
eXcelon front and rear speakers
#21
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
<font face="Verdana, Arial" size="2">Originally posted by Bill Krumel:
For those of us with driving lights would we have to take them off? Is there anyway to put driving lights on this grill??
THANKS!
</font>
For those of us with driving lights would we have to take them off? Is there anyway to put driving lights on this grill??
THANKS!
</font>
#22
Supreme Member
Join Date: Mar 2001
Location: Portland, OR www.cascadecrew.org
Posts: 6,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
i never got an e-mail back from you, did you send them all out.??
if you did, let me know, and i will re-send it.
if you did, let me know, and i will re-send it.
#23
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
<font face="Verdana, Arial" size="2">Originally posted by Dewey316:
i never got an e-mail back from you, did you send them all out.??
if you did, let me know, and i will re-send it.</font>
i never got an e-mail back from you, did you send them all out.??
if you did, let me know, and i will re-send it.</font>
I sent them, but it looks like it didnt get to you. Try sending an email from another account.
#26
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
<font face="Verdana, Arial" size="2">Originally posted by johnyIROC:
Are you going to post more pics or what?</font>
Are you going to post more pics or what?</font>
#27
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
The pics are uploaded, but you have to wait 20 minutes to see em. You can check em out by going to this site: http://community.webshots.com/user/scott_92rs , then click on "Billet Grille". They are very high resolution pics, and they may take a little while to load up.
Oh, and please dont make any comments on how much I need to wash my car, or get a new front spolier It was supposed to rain today, and I already have a new spolier ready to paint
[This message has been edited by Scott_92RS (edited November 19, 2001).]
Oh, and please dont make any comments on how much I need to wash my car, or get a new front spolier It was supposed to rain today, and I already have a new spolier ready to paint
[This message has been edited by Scott_92RS (edited November 19, 2001).]
#28
ack, factory z28 is better than that.
------------------
-Tas
'89 Formula WS-6
305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
------------------
-Tas
'89 Formula WS-6
305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
#29
I agree It looks like a truck grill. I bet the emblem did come off a GM truck or some sort.
------------------
1992 Z28 5.7 TPI
ZZ4 longblock
Harland Sharp roller rockers
Accel base and SLP siamesed runners,
52MM SLP Throttle Body
Hooker Headers & Flowmaster catback
MSD6A ignition
aluminum driveshaft
World Class 5-speed
------------------
1992 Z28 5.7 TPI
ZZ4 longblock
Harland Sharp roller rockers
Accel base and SLP siamesed runners,
52MM SLP Throttle Body
Hooker Headers & Flowmaster catback
MSD6A ignition
aluminum driveshaft
World Class 5-speed
#30
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Plano, TX
Posts: 1,817
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
<font face="Verdana, Arial" size="2">Originally posted by crucial:
I agree It looks like a truck grill. I bet the emblem did come off a GM truck or some sort.
</font>
I agree It looks like a truck grill. I bet the emblem did come off a GM truck or some sort.
</font>
Thread
Thread Starter
Forum
Replies
Last Post
Stangski09
Engine/Drivetrain/Suspension Parts for Sale
3
11-14-2015 01:27 PM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM