how would this win look on an black iroc http://www.a-aspec.com/media/gtr_wing.jpg

 

IMO not good. Look at the type of car it's on too It would just look out of place with the lines that the 3rd gens have.

 

you are so going to hell for picking out that wing. Please don't rice-i-fi your car.

 

Terrible. There's a 90-93 Mustang running around town with that wing on it and a twin turbo hood. I just laughed when I saw it..
But its your car, do what you will and be prepared to take **** for it.

------------------
1992 Camaro RS
5.0L TBI
K&N Airfilter and ready to take on the world!
My 1992 RS

 

Too bad you can't slap a Civic or an Integra under it. Thumbs down IMO.

------------------
90 RS Convertible
Owner: Top-Down Solutions
http://www.sc3gfb.org/members/lonsal.html
http://www.taskerinc.com/gs3/profiles/Lon_profile.htm

 

Go ahead it's Your Car. But dont be shocked when you see people rolling around on the floor, laughing their butts off.

 

Well, I guess I don't have much to say that you haven't heard already. Unless you like the "I just got rearended by a hang glider" look, I'd say to forget about the spoiler and try to remember why you bought a Camaro in the first place.

------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah

 

And why is that? To be like everyone else?

Be creative, I like it, but now I am getting it so forget about it. HE HE!



------------------
-------1992 Z28-------
Listed in Readers Rides

 

that looks nasty IMO

 

I'd rather tow a ford than put a nastier thing near the rear end of my car.

 

If you want to be truely Unique, make your own spoiler.

John

 

<----- pukes at the thought of that spoiler on any car, not to mention a 3rd gen! i hope you were kidding dude.


(i think people took fast and the furious too seriously)

 

Don't let them give you to much ****. I just delt with these same a$$holes on the apperance board about the same wing. I decided NOT to get it due to the fact its only 53" long and will not fit right on the back of the 3rd gen camaros. The hatch area its self is 53" then with the fenders its like 56" so the wing would not look right, needs to be at lest 58" IMO.

I found many other wing though. If you want to see them e-mail me and I will send you the addys for them. I refuse to post about wings again on this site due to the ignorant people that reply.

------------------
-------1992 Z28-------
Listed in Readers Rides

My new (small) web site!

ryanflowe/]myhomepage/]auto.html

[This message has been edited by GOFASTER (edited September 03, 2001).]

 

Please tell me your kidding? Are you??? I don't want to be mean but is what you put on rice "rockets". I would have to kill you if you put that on a camaro.

------------------
1989 Iroc-Z Blue T-Tops
Lightly Moded:
Headers, Rebuilt B&M 700R-4 tranny, Airfoil, K&N's

 

Sorry man I have to agree with these guys. Im sure that wing is pretty costly, why not spend that money making your car run faster? Instead of losing all that money when one of these guys rips it off and throws it in the dumpster.

Later,
87Irocz

[This message has been edited by 87Irocz (edited September 04, 2001).]

 

You guys/gals are Bruital. I am staying out of this fight.

John

 

------------------
-------1992 Z28------
**New Evolution Racing**

http://ourworld.cs.com/ryanflowe/myhomepage/auto.html

<A HREF="http://ourworld.cs.com/ryanflowe/myhomepage/favorite.html" TARGET=_blank>
http://ourworld.cs.com/ryanflowe/myhomepage/favorite.html</A>

 

Some *****-dude at my school said it adds like 15 hp. The only good use for this wing would be on ***** day (April 1st). Where all the Camaros, 'stangs, Novas and other muscle cars buy Jap stickers and put 'em all over there cars and duck tape folger's cans to their tips!

Well at least you diden't buy it yet, right?!

------------------
Matt

1984 Camaro Z28 - Black w/ Grey int.
Best 1/4 - 13.6 (5-speed) & 14.0 (Auto & 2.73!)
-'78 350 with Edelbrock 600 Carb, Edelbrock Preformer RPM Air gap intake, ACCEL plugs & wires, 14" Accel filter, Homemade Cold Air Indctn.
-TH350 with Hurst Pro-matic shifter & B&M Street shift kit.
-Audiobahn single 12" Sub powered by Sony Xplode amp, Farenheit 6x9" & 4x6" speakers, with a Sony Xplode headunit.
- Eagle Alloys 15" Alum. Rims surrounded by P235/60R15 BF Goodrich Radial T/A's

Comming Soon:
3.73's, Flowmaster, hollowed cat. & Paint: Navy Blue Metallic w/ Silver strips

 

Those wings look horrible on any car, whether it be a rice rocket or a third gen. What are you, some kind of space cadet? Gimme a break. That's horrible...horrible...ugh.

------------------
1992 Camaro RS (Auto) 5.0L TBI
-
Performance mods
NOS (125 HP shot)
Dynomax cat-back exhaust
Hedman headers
K & N open element/ X-Stream lid
MSD 6A ignition
LT1 camshaft
Soon to be installed:
Edelbrock intake manifold
3.42 rear axle
B & M 2400 RPM stall torque converter
Transgo shift kit
Moroso Blue Max plug wires
Torquer heads

Audio
Sony Xplod CDX-M610 head unit
Pioneer 2-way 4x6 front speakers
Pioneer 3-way 6x9 rear speakers
12 inch Pioneer VCCS PRO subwoofer
QLogic sealed box
Kicker ZR360 amplifier
Lightning Audio 1 farad capacitor

Other
Macewen White Faced Gauges/Shift overlay
A-pillar gauges (Phantom oil pressure, Air/Fuel)
180* thermostat
Window Tint

 

just get a '91-'92 Z28 wing. They are cheap and kick *** .

------------------
-Tas
'89 Formula WS-6

305, TBI, auto, 14x3 chrome flat based open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips....

To be installed eventually far far far into the future: Yours if the price is right and I don't have to ship :
Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248), Catco 3" cat, and injector spacer.

Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
AOL IM: superGRtaz

 

lets all beat him with sticks!

 

Try buying a corvette spoiler for your third gen they look really good.

 

I doubt u would be able to see out the back with that on

And it would prolly get u pulled over alot cus it blocks so much of ur vision

------------------
White 91 3.1 RS.
T-Tops
12" Sony XS-l1235 Bass tube powered by MTX 2120 amp. Kenwood 8015 Head unit

16" ROH Rims
Firestone Firehawks
ES Urethane Tranny Mount

 

Usually the Cops do not care about what is behind you, look at SEMI's they cant see out their rear window. Panel Vans sometimes cant see out their rear window either.

That is why the rear windows of our cars can be virtually black, because you can use the mirrors, and I usually don't try to drive my car backwards at 60mph.

John

 

Holy mother of all the fairies in America, what is wrong with the 91-92 Z28's wing? And if you dont like that wing why not get one of the "real" IROC wings for the third gen. Either wing should forfill even the most voracious of wing appetites. Just a thought.

1992 1LE
5spd

 

"Sparky, don't be gay."
Ever watch south park?
If you order that wing I'll break it over your head

Its not very cool.

 

First of all, I would like to say that I hate hearing everyone get so high and mighty about WHY it is so terrible to put that wing on. Personally, I think it looks absolutely ri-****-ulous, and worthless at everything except creating more drag. I personally like the spoiler delete option myself. None the less, when we bicker amongst ourselves, the ricers are the only winners. If you want your car to look like a *****, I'd say buy a *****...if you love thirdgens and happen to think that wing is cool (?) then hey, it's your car...and you're one of us, so I stand by you even though I don't like it!

 

Hey it bleeped out the C then the O then the C and then the K...

 

Ok everyone on flame me too, but I agree w/ abubaca, its your car if you like it, get it. I dont think that exact spoiler would look good on a thirdgen, but some larger spoilers I think would look all right. and if you like it, go for it.

------------------
Fire fighting, Scuba Diving, and Fast cars.....Does life get any more exciting

WwW.Generation-3.com
'86 TPi T/A L98
Mods:
Borla 3" Adjustable Cat Back
Edelbrock Headers
Catco High flow Cat
GT Auto Ram Air Hood
4th Gen. Spoiler
4th Gen Seats and center console

AOL Screen Name, Madbiker1